4478 lines
249 KiB
Tcl
4478 lines
249 KiB
Tcl
#*****************************************************************************************
|
|
# Vivado (TM) v2022.2 (64-bit)
|
|
#
|
|
# create_proj.tcl: Tcl script for re-creating project 'ad9081_fmca_ebz_zcu102'
|
|
#
|
|
# Generated by Vivado on Thu May 30 20:56:12 -0400 2024
|
|
# IP Build 3669848 on Fri Oct 14 08:30:02 MDT 2022
|
|
#
|
|
# This file contains the Vivado Tcl commands for re-creating the project to the state*
|
|
# when this script was generated. In order to re-create the project, please source this
|
|
# file in the Vivado Tcl Shell.
|
|
#
|
|
# * Note that the runs in the created project will be configured the same way as the
|
|
# original project, however they will not be launched automatically. To regenerate the
|
|
# run results please launch the synthesis/implementation runs as needed.
|
|
#
|
|
#*****************************************************************************************
|
|
# NOTE: In order to use this script for source control purposes, please make sure that the
|
|
# following files are added to the source control system:-
|
|
#
|
|
# 1. This project restoration tcl script (create_proj.tcl) that was generated.
|
|
#
|
|
# 2. The following source(s) files that were local or imported into the original project.
|
|
# (Please see the '$orig_proj_dir' and '$origin_dir' variable setting below at the start of the script)
|
|
#
|
|
# <none>
|
|
#
|
|
# 3. The following remote source files that were added to the original project:-
|
|
#
|
|
# "C:/ZCU102/zcu102_test2/common/ad_3w_spi.v"
|
|
# "C:/ZCU102/zcu102_test2/common/ad_iobuf.v"
|
|
# "C:/ZCU102/zcu102_test2/source/iprog_icap.vhd"
|
|
# "C:/ZCU102/zcu102_test2/source/system_top.v"
|
|
# "C:/ZCU102/zcu102_test2/constraints/system_constr.xdc"
|
|
# "C:/ZCU102/zcu102_test2/constraints/timing_constr.xdc"
|
|
# "C:/ZCU102/zcu102_test2/constraints/zcu102_system_constr.xdc"
|
|
# "C:/ZCU102/zcu102_test2/ip_repo/pdw_generator_1_0/src/axis_data_fifo_512x128/axis_data_fifo_512x128.xci"
|
|
# "C:/ZCU102/zcu102_test2/ip_repo/pdw_generator_1_0/src/axis_data_fifo_32x32/axis_data_fifo_32x32.xci"
|
|
# "C:/ZCU102/hdl/library/common/ad_perfect_shuffle.v"
|
|
# "C:/ZCU102/hdl/library/util_pack/util_pack_common/pack_ctrl.v"
|
|
# "C:/ZCU102/hdl/library/util_pack/util_pack_common/pack_interconnect.v"
|
|
# "C:/ZCU102/hdl/library/util_pack/util_pack_common/pack_network.v"
|
|
# "C:/ZCU102/hdl/library/util_pack/util_pack_common/pack_shell.v"
|
|
# "C:/ZCU102/hdl/library/util_pack/util_upack2/util_upack2.v"
|
|
# "C:/ZCU102/hdl/library/util_pack/util_upack2/util_upack2_impl.v"
|
|
# "C:/ZCU102/zcu102_test2/sim/tb_fifos.vhd"
|
|
# "C:/ZCU102/zcu102_test2/sim/axi_lite_traffic_gen.vhd"
|
|
# "C:/ZCU102/zcu102_test2/ip_repo/pdw_generator_1_0/src/addsub/addsub.xci"
|
|
# "C:/ZCU102/zcu102_test2/ip_repo/pdw_generator_1_0/src/sfifo_32b_1024_pf992_latency1/sfifo_32b_1024_pf992_latency1.xci"
|
|
# "C:/ZCU102/zcu102_test2/ip_repo/pdw_generator_1_0/src/adder_16signed_16signed_latency2/adder_16signed_16signed_latency2.xci"
|
|
# "C:/ZCU102/zcu102_test2/ip_repo/pdw_generator_1_0/src/afifo_32b_1024_pf512_latency1/afifo_32b_1024_pf512_latency1.xci"
|
|
# "C:/ZCU102/zcu102_test2/ip_repo/pdw_generator_1_0/src/dds_latency10/dds_latency10.xci"
|
|
# "C:/ZCU102/zcu102_test2/ip_repo/pdw_generator_1_0/src/pdw_wrapper.vhd"
|
|
# "C:/ZCU102/zcu102_test2/ip_repo/pdw_generator_1_0/src/dds_pulse_2x_top.vhd"
|
|
# "C:/ZCU102/zcu102_test2/ip_repo/pdw_generator_1_0/src/dds_pulse_gen.vhd"
|
|
# "C:/ZCU102/zcu102_test2/ip_repo/pdw_generator_1_0/src/tick_gen.vhd"
|
|
# "C:/ZCU102/zcu102_test2/ip_repo/pdw_generator_1_0/src/dds_cmd_gen.vhd"
|
|
# "C:/ZCU102/zcu102_test2/ip_repo/pdw_generator_1_0/src/mult_16signed_x_16unsigned_latency3/mult_16signed_x_16unsigned_latency3.xci"
|
|
#
|
|
#*****************************************************************************************
|
|
|
|
# Check file required for this script exists
|
|
proc checkRequiredFiles { origin_dir} {
|
|
set status true
|
|
set files [list \
|
|
"[file normalize "$origin_dir/common/ad_3w_spi.v"]"\
|
|
"[file normalize "$origin_dir/common/ad_iobuf.v"]"\
|
|
"[file normalize "$origin_dir/source/iprog_icap.vhd"]"\
|
|
"[file normalize "$origin_dir/source/system_top.v"]"\
|
|
"[file normalize "$origin_dir/constraints/system_constr.xdc"]"\
|
|
"[file normalize "$origin_dir/constraints/timing_constr.xdc"]"\
|
|
"[file normalize "$origin_dir/constraints/zcu102_system_constr.xdc"]"\
|
|
"[file normalize "$origin_dir/ip_repo/pdw_generator_1_0/src/axis_data_fifo_512x128/axis_data_fifo_512x128.xci"]"\
|
|
"[file normalize "$origin_dir/ip_repo/pdw_generator_1_0/src/axis_data_fifo_32x32/axis_data_fifo_32x32.xci"]"\
|
|
"[file normalize "$origin_dir/../hdl/library/common/ad_perfect_shuffle.v"]"\
|
|
"[file normalize "$origin_dir/../hdl/library/util_pack/util_pack_common/pack_ctrl.v"]"\
|
|
"[file normalize "$origin_dir/../hdl/library/util_pack/util_pack_common/pack_interconnect.v"]"\
|
|
"[file normalize "$origin_dir/../hdl/library/util_pack/util_pack_common/pack_network.v"]"\
|
|
"[file normalize "$origin_dir/../hdl/library/util_pack/util_pack_common/pack_shell.v"]"\
|
|
"[file normalize "$origin_dir/../hdl/library/util_pack/util_upack2/util_upack2.v"]"\
|
|
"[file normalize "$origin_dir/../hdl/library/util_pack/util_upack2/util_upack2_impl.v"]"\
|
|
"[file normalize "$origin_dir/sim/tb_fifos.vhd"]"\
|
|
"[file normalize "$origin_dir/sim/axi_lite_traffic_gen.vhd"]"\
|
|
"[file normalize "$origin_dir/ip_repo/pdw_generator_1_0/src/addsub/addsub.xci"]"\
|
|
"[file normalize "$origin_dir/ip_repo/pdw_generator_1_0/src/sfifo_32b_1024_pf992_latency1/sfifo_32b_1024_pf992_latency1.xci"]"\
|
|
"[file normalize "$origin_dir/ip_repo/pdw_generator_1_0/src/adder_16signed_16signed_latency2/adder_16signed_16signed_latency2.xci"]"\
|
|
"[file normalize "$origin_dir/ip_repo/pdw_generator_1_0/src/afifo_32b_1024_pf512_latency1/afifo_32b_1024_pf512_latency1.xci"]"\
|
|
"[file normalize "$origin_dir/ip_repo/pdw_generator_1_0/src/dds_latency10/dds_latency10.xci"]"\
|
|
"[file normalize "$origin_dir/ip_repo/pdw_generator_1_0/src/pdw_wrapper.vhd"]"\
|
|
"[file normalize "$origin_dir/ip_repo/pdw_generator_1_0/src/dds_pulse_2x_top.vhd"]"\
|
|
"[file normalize "$origin_dir/ip_repo/pdw_generator_1_0/src/dds_pulse_gen.vhd"]"\
|
|
"[file normalize "$origin_dir/ip_repo/pdw_generator_1_0/src/tick_gen.vhd"]"\
|
|
"[file normalize "$origin_dir/ip_repo/pdw_generator_1_0/src/dds_cmd_gen.vhd"]"\
|
|
"[file normalize "$origin_dir/ip_repo/pdw_generator_1_0/src/mult_16signed_x_16unsigned_latency3/mult_16signed_x_16unsigned_latency3.xci"]"\
|
|
]
|
|
foreach ifile $files {
|
|
if { ![file isfile $ifile] } {
|
|
puts " Could not find remote file $ifile "
|
|
set status false
|
|
}
|
|
}
|
|
|
|
set paths [list \
|
|
"[file normalize "$origin_dir/../ip_repo/pdw_generator_1_0"]"]"\
|
|
"[file normalize "$origin_dir/../ip_repo/dds_pulse_intfc_1_0"]"]"\
|
|
"[file normalize "$origin_dir/../../hdl/library"]"]"\
|
|
"[file normalize "$origin_dir/../source"]"]"\
|
|
"[file normalize "$origin_dir/../ip_repo/dds_pulse_intfc_x4_1_0"]"]"\
|
|
]
|
|
foreach ipath $paths {
|
|
if { ![file isdirectory $ipath] } {
|
|
puts " Could not access $ipath "
|
|
set status false
|
|
}
|
|
}
|
|
|
|
return $status
|
|
}
|
|
# Set the reference directory for source file relative paths (by default the value is script directory path)
|
|
set origin_dir "./zcu102_ad9081_dds_x4"
|
|
|
|
# Use origin directory path location variable, if specified in the tcl shell
|
|
if { [info exists ::origin_dir_loc] } {
|
|
set origin_dir $::origin_dir_loc
|
|
}
|
|
|
|
# Set the project name
|
|
set _xil_proj_name_ "ad9081_fmca_ebz_zcu102"
|
|
|
|
# Use project name variable, if specified in the tcl shell
|
|
if { [info exists ::user_project_name] } {
|
|
set _xil_proj_name_ $::user_project_name
|
|
}
|
|
|
|
variable script_file
|
|
set script_file "create_proj.tcl"
|
|
|
|
# Help information for this script
|
|
proc print_help {} {
|
|
variable script_file
|
|
puts "\nDescription:"
|
|
puts "Recreate a Vivado project from this script. The created project will be"
|
|
puts "functionally equivalent to the original project for which this script was"
|
|
puts "generated. The script contains commands for creating a project, filesets,"
|
|
puts "runs, adding/importing sources and setting properties on various objects.\n"
|
|
puts "Syntax:"
|
|
puts "$script_file"
|
|
puts "$script_file -tclargs \[--origin_dir <path>\]"
|
|
puts "$script_file -tclargs \[--project_name <name>\]"
|
|
puts "$script_file -tclargs \[--help\]\n"
|
|
puts "Usage:"
|
|
puts "Name Description"
|
|
puts "-------------------------------------------------------------------------"
|
|
puts "\[--origin_dir <path>\] Determine source file paths wrt this path. Default"
|
|
puts " origin_dir path value is \".\", otherwise, the value"
|
|
puts " that was set with the \"-paths_relative_to\" switch"
|
|
puts " when this script was generated.\n"
|
|
puts "\[--project_name <name>\] Create project with the specified name. Default"
|
|
puts " name is the name of the project from where this"
|
|
puts " script was generated.\n"
|
|
puts "\[--help\] Print help information for this script"
|
|
puts "-------------------------------------------------------------------------\n"
|
|
exit 0
|
|
}
|
|
|
|
if { $::argc > 0 } {
|
|
for {set i 0} {$i < $::argc} {incr i} {
|
|
set option [string trim [lindex $::argv $i]]
|
|
switch -regexp -- $option {
|
|
"--origin_dir" { incr i; set origin_dir [lindex $::argv $i] }
|
|
"--project_name" { incr i; set _xil_proj_name_ [lindex $::argv $i] }
|
|
"--help" { print_help }
|
|
default {
|
|
if { [regexp {^-} $option] } {
|
|
puts "ERROR: Unknown option '$option' specified, please type '$script_file -tclargs --help' for usage info.\n"
|
|
return 1
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
# Set the directory path for the original project from where this script was exported
|
|
set orig_proj_dir "[file normalize "$origin_dir/../ad9081_fmca_ebz_zcu102"]"
|
|
|
|
# Check for paths and files needed for project creation
|
|
set validate_required 0
|
|
if { $validate_required } {
|
|
if { [checkRequiredFiles $origin_dir] } {
|
|
puts "Tcl file $script_file is valid. All files required for project creation is accesable. "
|
|
} else {
|
|
puts "Tcl file $script_file is not valid. Not all files required for project creation is accesable. "
|
|
return
|
|
}
|
|
}
|
|
|
|
# Create project
|
|
create_project ${_xil_proj_name_} ./${_xil_proj_name_} -part xczu9eg-ffvb1156-2-e
|
|
|
|
# Set the directory path for the new project
|
|
set proj_dir [get_property directory [current_project]]
|
|
|
|
# Set project properties
|
|
set obj [current_project]
|
|
set_property -name "board_part_repo_paths" -value "[file normalize "$origin_dir/../../../Users/nicks/AppData/Roaming/Xilinx/Vivado/2019.2/xhub/board_store"]" -objects $obj
|
|
set_property -name "board_part" -value "xilinx.com:zcu102:part0:3.4" -objects $obj
|
|
set_property -name "default_lib" -value "xil_defaultlib" -objects $obj
|
|
set_property -name "enable_resource_estimation" -value "0" -objects $obj
|
|
set_property -name "enable_vhdl_2008" -value "1" -objects $obj
|
|
set_property -name "ip_cache_permissions" -value "read write" -objects $obj
|
|
set_property -name "ip_output_repo" -value "C:/ZCU102/hdl/ipcache" -objects $obj
|
|
set_property -name "mem.enable_memory_map_generation" -value "1" -objects $obj
|
|
set_property -name "platform.board_id" -value "zcu102" -objects $obj
|
|
set_property -name "revised_directory_structure" -value "1" -objects $obj
|
|
set_property -name "sim.central_dir" -value "$proj_dir/${_xil_proj_name_}.ip_user_files" -objects $obj
|
|
set_property -name "sim.ip.auto_export_scripts" -value "1" -objects $obj
|
|
set_property -name "simulator_language" -value "Mixed" -objects $obj
|
|
set_property -name "sim_compile_state" -value "1" -objects $obj
|
|
set_property -name "source_mgmt_mode" -value "DisplayOnly" -objects $obj
|
|
set_property -name "target_language" -value "VHDL" -objects $obj
|
|
set_property -name "webtalk.activehdl_export_sim" -value "54" -objects $obj
|
|
set_property -name "webtalk.modelsim_export_sim" -value "54" -objects $obj
|
|
set_property -name "webtalk.questa_export_sim" -value "54" -objects $obj
|
|
set_property -name "webtalk.riviera_export_sim" -value "54" -objects $obj
|
|
set_property -name "webtalk.vcs_export_sim" -value "54" -objects $obj
|
|
set_property -name "webtalk.xsim_export_sim" -value "54" -objects $obj
|
|
set_property -name "webtalk.xsim_launch_sim" -value "29" -objects $obj
|
|
set_property -name "xpm_libraries" -value "XPM_CDC XPM_FIFO XPM_MEMORY" -objects $obj
|
|
|
|
# Create 'sources_1' fileset (if not found)
|
|
if {[string equal [get_filesets -quiet sources_1] ""]} {
|
|
create_fileset -srcset sources_1
|
|
}
|
|
|
|
# Set IP repository paths
|
|
set obj [get_filesets sources_1]
|
|
if { $obj != {} } {
|
|
set_property "ip_repo_paths" "[file normalize "$origin_dir/../ip_repo/pdw_generator_1_0"] [file normalize "$origin_dir/../ip_repo/dds_pulse_intfc_1_0"] [file normalize "$origin_dir/../../hdl/library"] [file normalize "$origin_dir/../source"] [file normalize "$origin_dir/../ip_repo/dds_pulse_intfc_x4_1_0"]" $obj
|
|
|
|
# Rebuild user ip_repo's index before adding any source files
|
|
update_ip_catalog -rebuild
|
|
}
|
|
|
|
# Set 'sources_1' fileset object
|
|
set obj [get_filesets sources_1]
|
|
set files [list \
|
|
[file normalize "${origin_dir}/../common/ad_3w_spi.v"] \
|
|
[file normalize "${origin_dir}/../common/ad_iobuf.v"] \
|
|
[file normalize "${origin_dir}/../source/iprog_icap.vhd"] \
|
|
[file normalize "${origin_dir}/../source/system_top.v"] \
|
|
]
|
|
add_files -norecurse -fileset $obj $files
|
|
|
|
# Set 'sources_1' fileset file properties for remote files
|
|
set file "$origin_dir/../source/iprog_icap.vhd"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets sources_1] [list "*$file"]]
|
|
set_property -name "file_type" -value "VHDL" -objects $file_obj
|
|
|
|
|
|
# Set 'sources_1' fileset file properties for local files
|
|
# None
|
|
|
|
# Set 'sources_1' fileset properties
|
|
set obj [get_filesets sources_1]
|
|
set_property -name "dataflow_viewer_settings" -value "min_width=16" -objects $obj
|
|
set_property -name "generic" -value "JESD_MODE=8B10B RX_LANE_RATE=10 TX_LANE_RATE=10 RX_JESD_M=8 RX_JESD_L=4 RX_JESD_S=1 RX_JESD_NP=16 RX_NUM_LINKS=1 RX_TPL_WIDTH TX_JESD_M=8 TX_JESD_L=4 TX_JESD_S=1 TX_JESD_NP=16 TX_NUM_LINKS=1 TX_TPL_WIDTH TDD_SUPPORT=0 SHARED_DEVCLK=0 TDD_CHANNEL_CNT=2 TDD_SYNC_WIDTH=32 TDD_SYNC_INT=1 TDD_SYNC_EXT=0 TDD_SYNC_EXT_CDC=0" -objects $obj
|
|
set_property -name "top" -value "system_top" -objects $obj
|
|
set_property -name "top_auto_set" -value "0" -objects $obj
|
|
set_property -name "vhdl_generic" -value "JESD_MODE=8B10B RX_LANE_RATE=10 TX_LANE_RATE=10 RX_JESD_M=8 RX_JESD_L=4 RX_JESD_S=1 RX_JESD_NP=16 RX_NUM_LINKS=1 RX_TPL_WIDTH TX_JESD_M=8 TX_JESD_L=4 TX_JESD_S=1 TX_JESD_NP=16 TX_NUM_LINKS=1 TX_TPL_WIDTH TDD_SUPPORT=0 SHARED_DEVCLK=0 TDD_CHANNEL_CNT=2 TDD_SYNC_WIDTH=32 TDD_SYNC_INT=1 TDD_SYNC_EXT=0 TDD_SYNC_EXT_CDC=0" -objects $obj
|
|
|
|
# Create 'constrs_1' fileset (if not found)
|
|
if {[string equal [get_filesets -quiet constrs_1] ""]} {
|
|
create_fileset -constrset constrs_1
|
|
}
|
|
|
|
# Set 'constrs_1' fileset object
|
|
set obj [get_filesets constrs_1]
|
|
|
|
# Add/Import constrs file and set constrs file properties
|
|
set file "[file normalize "$origin_dir/../constraints/system_constr.xdc"]"
|
|
set file_added [add_files -norecurse -fileset $obj [list $file]]
|
|
set file "$origin_dir/../constraints/system_constr.xdc"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]]
|
|
set_property -name "file_type" -value "XDC" -objects $file_obj
|
|
|
|
# Add/Import constrs file and set constrs file properties
|
|
set file "[file normalize "$origin_dir/../constraints/timing_constr.xdc"]"
|
|
set file_added [add_files -norecurse -fileset $obj [list $file]]
|
|
set file "$origin_dir/../constraints/timing_constr.xdc"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]]
|
|
set_property -name "file_type" -value "XDC" -objects $file_obj
|
|
|
|
# Add/Import constrs file and set constrs file properties
|
|
set file "[file normalize "$origin_dir/../constraints/zcu102_system_constr.xdc"]"
|
|
set file_added [add_files -norecurse -fileset $obj [list $file]]
|
|
set file "$origin_dir/../constraints/zcu102_system_constr.xdc"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets constrs_1] [list "*$file"]]
|
|
set_property -name "file_type" -value "XDC" -objects $file_obj
|
|
|
|
# Set 'constrs_1' fileset properties
|
|
set obj [get_filesets constrs_1]
|
|
|
|
# Create 'sim_1' fileset (if not found)
|
|
if {[string equal [get_filesets -quiet sim_1] ""]} {
|
|
create_fileset -simset sim_1
|
|
}
|
|
|
|
# Set 'sim_1' fileset object
|
|
set obj [get_filesets sim_1]
|
|
set files [list \
|
|
[file normalize "${origin_dir}/../ip_repo/pdw_generator_1_0/src/axis_data_fifo_512x128/axis_data_fifo_512x128.xci"] \
|
|
[file normalize "${origin_dir}/../ip_repo/pdw_generator_1_0/src/axis_data_fifo_32x32/axis_data_fifo_32x32.xci"] \
|
|
[file normalize "${origin_dir}/../../hdl/library/common/ad_perfect_shuffle.v"] \
|
|
[file normalize "${origin_dir}/../../hdl/library/util_pack/util_pack_common/pack_ctrl.v"] \
|
|
[file normalize "${origin_dir}/../../hdl/library/util_pack/util_pack_common/pack_interconnect.v"] \
|
|
[file normalize "${origin_dir}/../../hdl/library/util_pack/util_pack_common/pack_network.v"] \
|
|
[file normalize "${origin_dir}/../../hdl/library/util_pack/util_pack_common/pack_shell.v"] \
|
|
[file normalize "${origin_dir}/../../hdl/library/util_pack/util_upack2/util_upack2.v"] \
|
|
[file normalize "${origin_dir}/../../hdl/library/util_pack/util_upack2/util_upack2_impl.v"] \
|
|
[file normalize "${origin_dir}/../sim/tb_fifos.vhd"] \
|
|
[file normalize "${origin_dir}/../sim/axi_lite_traffic_gen.vhd"] \
|
|
[file normalize "${origin_dir}/../ip_repo/pdw_generator_1_0/src/addsub/addsub.xci"] \
|
|
[file normalize "${origin_dir}/../ip_repo/pdw_generator_1_0/src/sfifo_32b_1024_pf992_latency1/sfifo_32b_1024_pf992_latency1.xci"] \
|
|
[file normalize "${origin_dir}/../ip_repo/pdw_generator_1_0/src/adder_16signed_16signed_latency2/adder_16signed_16signed_latency2.xci"] \
|
|
[file normalize "${origin_dir}/../ip_repo/pdw_generator_1_0/src/afifo_32b_1024_pf512_latency1/afifo_32b_1024_pf512_latency1.xci"] \
|
|
[file normalize "${origin_dir}/../ip_repo/pdw_generator_1_0/src/dds_latency10/dds_latency10.xci"] \
|
|
[file normalize "${origin_dir}/../ip_repo/pdw_generator_1_0/src/pdw_wrapper.vhd"] \
|
|
[file normalize "${origin_dir}/../ip_repo/pdw_generator_1_0/src/dds_pulse_2x_top.vhd"] \
|
|
[file normalize "${origin_dir}/../ip_repo/pdw_generator_1_0/src/dds_pulse_gen.vhd"] \
|
|
[file normalize "${origin_dir}/../ip_repo/pdw_generator_1_0/src/tick_gen.vhd"] \
|
|
[file normalize "${origin_dir}/../ip_repo/pdw_generator_1_0/src/dds_cmd_gen.vhd"] \
|
|
[file normalize "${origin_dir}/../ip_repo/pdw_generator_1_0/src/mult_16signed_x_16unsigned_latency3/mult_16signed_x_16unsigned_latency3.xci"] \
|
|
]
|
|
add_files -norecurse -fileset $obj $files
|
|
|
|
# Set 'sim_1' fileset file properties for remote files
|
|
set file "$origin_dir/../ip_repo/pdw_generator_1_0/src/axis_data_fifo_512x128/axis_data_fifo_512x128.xci"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets sim_1] [list "*$file"]]
|
|
set_property -name "generate_files_for_reference" -value "0" -objects $file_obj
|
|
set_property -name "registered_with_manager" -value "1" -objects $file_obj
|
|
|
|
set file "$origin_dir/../ip_repo/pdw_generator_1_0/src/axis_data_fifo_32x32/axis_data_fifo_32x32.xci"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets sim_1] [list "*$file"]]
|
|
set_property -name "generate_files_for_reference" -value "0" -objects $file_obj
|
|
set_property -name "registered_with_manager" -value "1" -objects $file_obj
|
|
|
|
set file "$origin_dir/../sim/tb_fifos.vhd"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets sim_1] [list "*$file"]]
|
|
set_property -name "file_type" -value "VHDL" -objects $file_obj
|
|
|
|
set file "$origin_dir/../sim/axi_lite_traffic_gen.vhd"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets sim_1] [list "*$file"]]
|
|
set_property -name "file_type" -value "VHDL" -objects $file_obj
|
|
|
|
set file "$origin_dir/../ip_repo/pdw_generator_1_0/src/addsub/addsub.xci"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets sim_1] [list "*$file"]]
|
|
set_property -name "generate_files_for_reference" -value "0" -objects $file_obj
|
|
set_property -name "registered_with_manager" -value "1" -objects $file_obj
|
|
|
|
set file "$origin_dir/../ip_repo/pdw_generator_1_0/src/sfifo_32b_1024_pf992_latency1/sfifo_32b_1024_pf992_latency1.xci"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets sim_1] [list "*$file"]]
|
|
set_property -name "generate_files_for_reference" -value "0" -objects $file_obj
|
|
set_property -name "registered_with_manager" -value "1" -objects $file_obj
|
|
|
|
set file "$origin_dir/../ip_repo/pdw_generator_1_0/src/adder_16signed_16signed_latency2/adder_16signed_16signed_latency2.xci"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets sim_1] [list "*$file"]]
|
|
set_property -name "generate_files_for_reference" -value "0" -objects $file_obj
|
|
set_property -name "registered_with_manager" -value "1" -objects $file_obj
|
|
|
|
set file "$origin_dir/../ip_repo/pdw_generator_1_0/src/afifo_32b_1024_pf512_latency1/afifo_32b_1024_pf512_latency1.xci"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets sim_1] [list "*$file"]]
|
|
set_property -name "generate_files_for_reference" -value "0" -objects $file_obj
|
|
set_property -name "registered_with_manager" -value "1" -objects $file_obj
|
|
|
|
set file "$origin_dir/../ip_repo/pdw_generator_1_0/src/dds_latency10/dds_latency10.xci"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets sim_1] [list "*$file"]]
|
|
set_property -name "generate_files_for_reference" -value "0" -objects $file_obj
|
|
set_property -name "registered_with_manager" -value "1" -objects $file_obj
|
|
|
|
set file "$origin_dir/../ip_repo/pdw_generator_1_0/src/pdw_wrapper.vhd"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets sim_1] [list "*$file"]]
|
|
set_property -name "file_type" -value "VHDL" -objects $file_obj
|
|
|
|
set file "$origin_dir/../ip_repo/pdw_generator_1_0/src/dds_pulse_2x_top.vhd"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets sim_1] [list "*$file"]]
|
|
set_property -name "file_type" -value "VHDL" -objects $file_obj
|
|
|
|
set file "$origin_dir/../ip_repo/pdw_generator_1_0/src/dds_pulse_gen.vhd"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets sim_1] [list "*$file"]]
|
|
set_property -name "file_type" -value "VHDL" -objects $file_obj
|
|
|
|
set file "$origin_dir/../ip_repo/pdw_generator_1_0/src/tick_gen.vhd"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets sim_1] [list "*$file"]]
|
|
set_property -name "file_type" -value "VHDL" -objects $file_obj
|
|
|
|
set file "$origin_dir/../ip_repo/pdw_generator_1_0/src/dds_cmd_gen.vhd"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets sim_1] [list "*$file"]]
|
|
set_property -name "file_type" -value "VHDL" -objects $file_obj
|
|
|
|
set file "$origin_dir/../ip_repo/pdw_generator_1_0/src/mult_16signed_x_16unsigned_latency3/mult_16signed_x_16unsigned_latency3.xci"
|
|
set file [file normalize $file]
|
|
set file_obj [get_files -of_objects [get_filesets sim_1] [list "*$file"]]
|
|
set_property -name "generate_files_for_reference" -value "0" -objects $file_obj
|
|
set_property -name "registered_with_manager" -value "1" -objects $file_obj
|
|
|
|
|
|
# Set 'sim_1' fileset file properties for local files
|
|
# None
|
|
|
|
# Set 'sim_1' fileset properties
|
|
set obj [get_filesets sim_1]
|
|
set_property -name "top" -value "tb_fifos" -objects $obj
|
|
set_property -name "top_auto_set" -value "0" -objects $obj
|
|
set_property -name "top_lib" -value "xil_defaultlib" -objects $obj
|
|
|
|
# Set 'utils_1' fileset object
|
|
set obj [get_filesets utils_1]
|
|
# Empty (no sources present)
|
|
|
|
# Set 'utils_1' fileset properties
|
|
set obj [get_filesets utils_1]
|
|
|
|
|
|
# Adding sources referenced in BDs, if not already added
|
|
|
|
|
|
# Proc to create BD system
|
|
proc cr_bd_system { parentCell } {
|
|
|
|
# CHANGE DESIGN NAME HERE
|
|
set design_name system
|
|
|
|
common::send_gid_msg -ssname BD::TCL -id 2010 -severity "INFO" "Currently there is no design <$design_name> in project, so creating one..."
|
|
|
|
create_bd_design $design_name
|
|
|
|
set bCheckIPsPassed 1
|
|
##################################################################
|
|
# CHECK IPs
|
|
##################################################################
|
|
set bCheckIPs 1
|
|
if { $bCheckIPs == 1 } {
|
|
set list_check_ips "\
|
|
xilinx.com:ip:xlconstant:1.1\
|
|
xilinx.com:ip:smartconnect:1.0\
|
|
analog.com:user:axi_dmac:1.0\
|
|
analog.com:user:axi_adxcvr:1.0\
|
|
analog.com:user:axi_sysid:1.0\
|
|
xilinx.com:ip:xlconcat:2.1\
|
|
xilinx.com:ip:util_reduced_logic:2.0\
|
|
xilinx.com:ip:util_vector_logic:2.0\
|
|
xilinx.com:user:pdw_generator:1.0\
|
|
analog.com:user:sysid_rom:1.0\
|
|
xilinx.com:ip:proc_sys_reset:5.0\
|
|
xilinx.com:ip:zynq_ultra_ps_e:3.4\
|
|
analog.com:user:util_cpack2:1.0\
|
|
analog.com:user:util_upack2:1.0\
|
|
analog.com:user:util_adxcvr:1.0\
|
|
analog.com:user:jesd204_rx:1.0\
|
|
analog.com:user:axi_jesd204_rx:1.0\
|
|
analog.com:user:jesd204_tx:1.0\
|
|
analog.com:user:axi_jesd204_tx:1.0\
|
|
analog.com:user:data_offload:1.0\
|
|
analog.com:user:util_do_ram:1.0\
|
|
analog.com:user:ad_ip_jesd204_tpl_adc:1.0\
|
|
xilinx.com:ip:xlslice:1.0\
|
|
analog.com:user:ad_ip_jesd204_tpl_dac:1.0\
|
|
"
|
|
|
|
set list_ips_missing ""
|
|
common::send_gid_msg -ssname BD::TCL -id 2011 -severity "INFO" "Checking if the following IPs exist in the project's IP catalog: $list_check_ips ."
|
|
|
|
foreach ip_vlnv $list_check_ips {
|
|
set ip_obj [get_ipdefs -all $ip_vlnv]
|
|
if { $ip_obj eq "" } {
|
|
lappend list_ips_missing $ip_vlnv
|
|
}
|
|
}
|
|
|
|
if { $list_ips_missing ne "" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2012 -severity "ERROR" "The following IPs are not found in the IP Catalog:\n $list_ips_missing\n\nResolution: Please add the repository containing the IP(s) to the project." }
|
|
set bCheckIPsPassed 0
|
|
}
|
|
|
|
}
|
|
|
|
if { $bCheckIPsPassed != 1 } {
|
|
common::send_gid_msg -ssname BD::TCL -id 2023 -severity "WARNING" "Will not continue with creation of design due to the error(s) above."
|
|
return 3
|
|
}
|
|
|
|
|
|
# Hierarchical cell: tx_mxfe_tpl_core
|
|
proc create_hier_cell_tx_mxfe_tpl_core { parentCell nameHier } {
|
|
|
|
variable script_folder
|
|
|
|
if { $parentCell eq "" || $nameHier eq "" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2092 -severity "ERROR" "create_hier_cell_tx_mxfe_tpl_core() - Empty argument(s)!"}
|
|
return
|
|
}
|
|
|
|
# Get object for parentCell
|
|
set parentObj [get_bd_cells $parentCell]
|
|
if { $parentObj == "" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2090 -severity "ERROR" "Unable to find parent cell <$parentCell>!"}
|
|
return
|
|
}
|
|
|
|
# Make sure parentObj is hier blk
|
|
set parentType [get_property TYPE $parentObj]
|
|
if { $parentType ne "hier" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2091 -severity "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
|
|
return
|
|
}
|
|
|
|
# Save current instance; Restore later
|
|
set oldCurInst [current_bd_instance .]
|
|
|
|
# Set parent object as current
|
|
current_bd_instance $parentObj
|
|
|
|
# Create cell and set as current instance
|
|
set hier_obj [create_bd_cell -type hier $nameHier]
|
|
current_bd_instance $hier_obj
|
|
|
|
# Create interface pins
|
|
create_bd_intf_pin -mode Master -vlnv xilinx.com:interface:axis_rtl:1.0 link
|
|
|
|
create_bd_intf_pin -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 s_axi
|
|
|
|
|
|
# Create pins
|
|
create_bd_pin -dir I -from 15 -to 0 dac_data_0
|
|
create_bd_pin -dir I -from 15 -to 0 dac_data_1
|
|
create_bd_pin -dir I -from 15 -to 0 dac_data_2
|
|
create_bd_pin -dir I -from 15 -to 0 dac_data_3
|
|
create_bd_pin -dir I -from 15 -to 0 dac_data_4
|
|
create_bd_pin -dir I -from 15 -to 0 dac_data_5
|
|
create_bd_pin -dir I -from 15 -to 0 dac_data_6
|
|
create_bd_pin -dir I -from 15 -to 0 dac_data_7
|
|
create_bd_pin -dir I dac_dunf
|
|
create_bd_pin -dir O -from 0 -to 0 dac_enable_0
|
|
create_bd_pin -dir O -from 0 -to 0 dac_enable_1
|
|
create_bd_pin -dir O -from 0 -to 0 dac_enable_2
|
|
create_bd_pin -dir O -from 0 -to 0 dac_enable_3
|
|
create_bd_pin -dir O -from 0 -to 0 dac_enable_4
|
|
create_bd_pin -dir O -from 0 -to 0 dac_enable_5
|
|
create_bd_pin -dir O -from 0 -to 0 dac_enable_6
|
|
create_bd_pin -dir O -from 0 -to 0 dac_enable_7
|
|
create_bd_pin -dir O dac_rst
|
|
create_bd_pin -dir I dac_sync_manual_req_in
|
|
create_bd_pin -dir O dac_sync_manual_req_out
|
|
create_bd_pin -dir O -from 0 -to 0 dac_valid_0
|
|
create_bd_pin -dir O -from 0 -to 0 dac_valid_1
|
|
create_bd_pin -dir O -from 0 -to 0 dac_valid_2
|
|
create_bd_pin -dir O -from 0 -to 0 dac_valid_3
|
|
create_bd_pin -dir O -from 0 -to 0 dac_valid_4
|
|
create_bd_pin -dir O -from 0 -to 0 dac_valid_5
|
|
create_bd_pin -dir O -from 0 -to 0 dac_valid_6
|
|
create_bd_pin -dir O -from 0 -to 0 dac_valid_7
|
|
create_bd_pin -dir I ext_sync_in
|
|
create_bd_pin -dir I -type clk link_clk
|
|
create_bd_pin -dir I -type clk s_axi_aclk
|
|
create_bd_pin -dir I -type rst s_axi_aresetn
|
|
|
|
# Create instance: dac_tpl_core, and set properties
|
|
set dac_tpl_core [ create_bd_cell -type ip -vlnv analog.com:user:ad_ip_jesd204_tpl_dac:1.0 dac_tpl_core ]
|
|
set_property -dict [list \
|
|
CONFIG.BITS_PER_SAMPLE {16} \
|
|
CONFIG.CONVERTER_RESOLUTION {16} \
|
|
CONFIG.DMA_BITS_PER_SAMPLE {16} \
|
|
CONFIG.EXT_SYNC {1} \
|
|
CONFIG.IQCORRECTION_DISABLE {0} \
|
|
CONFIG.NUM_CHANNELS {8} \
|
|
CONFIG.NUM_LANES {4} \
|
|
CONFIG.OCTETS_PER_BEAT {4} \
|
|
CONFIG.SAMPLES_PER_FRAME {1} \
|
|
] $dac_tpl_core
|
|
|
|
|
|
# Create instance: data_concat0, and set properties
|
|
set data_concat0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlconcat:2.1 data_concat0 ]
|
|
set_property CONFIG.NUM_PORTS {8} $data_concat0
|
|
|
|
|
|
# Create instance: enable_slice_0, and set properties
|
|
set enable_slice_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 enable_slice_0 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {0} \
|
|
CONFIG.DIN_TO {0} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $enable_slice_0
|
|
|
|
|
|
# Create instance: enable_slice_1, and set properties
|
|
set enable_slice_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 enable_slice_1 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {1} \
|
|
CONFIG.DIN_TO {1} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $enable_slice_1
|
|
|
|
|
|
# Create instance: enable_slice_2, and set properties
|
|
set enable_slice_2 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 enable_slice_2 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {2} \
|
|
CONFIG.DIN_TO {2} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $enable_slice_2
|
|
|
|
|
|
# Create instance: enable_slice_3, and set properties
|
|
set enable_slice_3 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 enable_slice_3 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {3} \
|
|
CONFIG.DIN_TO {3} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $enable_slice_3
|
|
|
|
|
|
# Create instance: enable_slice_4, and set properties
|
|
set enable_slice_4 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 enable_slice_4 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {4} \
|
|
CONFIG.DIN_TO {4} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $enable_slice_4
|
|
|
|
|
|
# Create instance: enable_slice_5, and set properties
|
|
set enable_slice_5 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 enable_slice_5 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {5} \
|
|
CONFIG.DIN_TO {5} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $enable_slice_5
|
|
|
|
|
|
# Create instance: enable_slice_6, and set properties
|
|
set enable_slice_6 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 enable_slice_6 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {6} \
|
|
CONFIG.DIN_TO {6} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $enable_slice_6
|
|
|
|
|
|
# Create instance: enable_slice_7, and set properties
|
|
set enable_slice_7 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 enable_slice_7 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {7} \
|
|
CONFIG.DIN_TO {7} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $enable_slice_7
|
|
|
|
|
|
# Create instance: valid_slice_0, and set properties
|
|
set valid_slice_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 valid_slice_0 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {0} \
|
|
CONFIG.DIN_TO {0} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $valid_slice_0
|
|
|
|
|
|
# Create instance: valid_slice_1, and set properties
|
|
set valid_slice_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 valid_slice_1 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {1} \
|
|
CONFIG.DIN_TO {1} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $valid_slice_1
|
|
|
|
|
|
# Create instance: valid_slice_2, and set properties
|
|
set valid_slice_2 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 valid_slice_2 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {2} \
|
|
CONFIG.DIN_TO {2} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $valid_slice_2
|
|
|
|
|
|
# Create instance: valid_slice_3, and set properties
|
|
set valid_slice_3 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 valid_slice_3 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {3} \
|
|
CONFIG.DIN_TO {3} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $valid_slice_3
|
|
|
|
|
|
# Create instance: valid_slice_4, and set properties
|
|
set valid_slice_4 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 valid_slice_4 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {4} \
|
|
CONFIG.DIN_TO {4} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $valid_slice_4
|
|
|
|
|
|
# Create instance: valid_slice_5, and set properties
|
|
set valid_slice_5 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 valid_slice_5 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {5} \
|
|
CONFIG.DIN_TO {5} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $valid_slice_5
|
|
|
|
|
|
# Create instance: valid_slice_6, and set properties
|
|
set valid_slice_6 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 valid_slice_6 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {6} \
|
|
CONFIG.DIN_TO {6} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $valid_slice_6
|
|
|
|
|
|
# Create instance: valid_slice_7, and set properties
|
|
set valid_slice_7 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 valid_slice_7 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {7} \
|
|
CONFIG.DIN_TO {7} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $valid_slice_7
|
|
|
|
|
|
# Create interface connections
|
|
connect_bd_intf_net -intf_net dac_tpl_core_link [get_bd_intf_pins link] [get_bd_intf_pins dac_tpl_core/link]
|
|
connect_bd_intf_net -intf_net s_axi_1 [get_bd_intf_pins s_axi] [get_bd_intf_pins dac_tpl_core/s_axi]
|
|
|
|
# Create port connections
|
|
connect_bd_net -net dac_data_0_1 [get_bd_pins dac_data_0] [get_bd_pins data_concat0/In0]
|
|
connect_bd_net -net dac_data_1_1 [get_bd_pins dac_data_1] [get_bd_pins data_concat0/In1]
|
|
connect_bd_net -net dac_data_2_1 [get_bd_pins dac_data_2] [get_bd_pins data_concat0/In2]
|
|
connect_bd_net -net dac_data_3_1 [get_bd_pins dac_data_3] [get_bd_pins data_concat0/In3]
|
|
connect_bd_net -net dac_data_4_1 [get_bd_pins dac_data_4] [get_bd_pins data_concat0/In4]
|
|
connect_bd_net -net dac_data_5_1 [get_bd_pins dac_data_5] [get_bd_pins data_concat0/In5]
|
|
connect_bd_net -net dac_data_6_1 [get_bd_pins dac_data_6] [get_bd_pins data_concat0/In6]
|
|
connect_bd_net -net dac_data_7_1 [get_bd_pins dac_data_7] [get_bd_pins data_concat0/In7]
|
|
connect_bd_net -net dac_dunf_1 [get_bd_pins dac_dunf] [get_bd_pins dac_tpl_core/dac_dunf]
|
|
connect_bd_net -net dac_sync_manual_req_in_1 [get_bd_pins dac_sync_manual_req_in] [get_bd_pins dac_tpl_core/dac_sync_manual_req_in]
|
|
connect_bd_net -net dac_tpl_core_dac_rst [get_bd_pins dac_rst] [get_bd_pins dac_tpl_core/dac_rst]
|
|
connect_bd_net -net dac_tpl_core_dac_sync_manual_req_out [get_bd_pins dac_sync_manual_req_out] [get_bd_pins dac_tpl_core/dac_sync_manual_req_out]
|
|
connect_bd_net -net dac_tpl_core_dac_valid [get_bd_pins dac_tpl_core/dac_valid] [get_bd_pins valid_slice_0/Din] [get_bd_pins valid_slice_1/Din] [get_bd_pins valid_slice_2/Din] [get_bd_pins valid_slice_3/Din] [get_bd_pins valid_slice_4/Din] [get_bd_pins valid_slice_5/Din] [get_bd_pins valid_slice_6/Din] [get_bd_pins valid_slice_7/Din]
|
|
connect_bd_net -net dac_tpl_core_enable [get_bd_pins dac_tpl_core/enable] [get_bd_pins enable_slice_0/Din] [get_bd_pins enable_slice_1/Din] [get_bd_pins enable_slice_2/Din] [get_bd_pins enable_slice_3/Din] [get_bd_pins enable_slice_4/Din] [get_bd_pins enable_slice_5/Din] [get_bd_pins enable_slice_6/Din] [get_bd_pins enable_slice_7/Din]
|
|
connect_bd_net -net data_concat0_dout [get_bd_pins dac_tpl_core/dac_ddata] [get_bd_pins data_concat0/dout]
|
|
connect_bd_net -net enable_slice_0_Dout [get_bd_pins dac_enable_0] [get_bd_pins enable_slice_0/Dout]
|
|
connect_bd_net -net enable_slice_1_Dout [get_bd_pins dac_enable_1] [get_bd_pins enable_slice_1/Dout]
|
|
connect_bd_net -net enable_slice_2_Dout [get_bd_pins dac_enable_2] [get_bd_pins enable_slice_2/Dout]
|
|
connect_bd_net -net enable_slice_3_Dout [get_bd_pins dac_enable_3] [get_bd_pins enable_slice_3/Dout]
|
|
connect_bd_net -net enable_slice_4_Dout [get_bd_pins dac_enable_4] [get_bd_pins enable_slice_4/Dout]
|
|
connect_bd_net -net enable_slice_5_Dout [get_bd_pins dac_enable_5] [get_bd_pins enable_slice_5/Dout]
|
|
connect_bd_net -net enable_slice_6_Dout [get_bd_pins dac_enable_6] [get_bd_pins enable_slice_6/Dout]
|
|
connect_bd_net -net enable_slice_7_Dout [get_bd_pins dac_enable_7] [get_bd_pins enable_slice_7/Dout]
|
|
connect_bd_net -net ext_sync_in_1 [get_bd_pins ext_sync_in] [get_bd_pins dac_tpl_core/dac_sync_in]
|
|
connect_bd_net -net link_clk_1 [get_bd_pins link_clk] [get_bd_pins dac_tpl_core/link_clk]
|
|
connect_bd_net -net s_axi_aclk_1 [get_bd_pins s_axi_aclk] [get_bd_pins dac_tpl_core/s_axi_aclk]
|
|
connect_bd_net -net s_axi_aresetn_1 [get_bd_pins s_axi_aresetn] [get_bd_pins dac_tpl_core/s_axi_aresetn]
|
|
connect_bd_net -net valid_slice_0_Dout [get_bd_pins dac_valid_0] [get_bd_pins valid_slice_0/Dout]
|
|
connect_bd_net -net valid_slice_1_Dout [get_bd_pins dac_valid_1] [get_bd_pins valid_slice_1/Dout]
|
|
connect_bd_net -net valid_slice_2_Dout [get_bd_pins dac_valid_2] [get_bd_pins valid_slice_2/Dout]
|
|
connect_bd_net -net valid_slice_3_Dout [get_bd_pins dac_valid_3] [get_bd_pins valid_slice_3/Dout]
|
|
connect_bd_net -net valid_slice_4_Dout [get_bd_pins dac_valid_4] [get_bd_pins valid_slice_4/Dout]
|
|
connect_bd_net -net valid_slice_5_Dout [get_bd_pins dac_valid_5] [get_bd_pins valid_slice_5/Dout]
|
|
connect_bd_net -net valid_slice_6_Dout [get_bd_pins dac_valid_6] [get_bd_pins valid_slice_6/Dout]
|
|
connect_bd_net -net valid_slice_7_Dout [get_bd_pins dac_valid_7] [get_bd_pins valid_slice_7/Dout]
|
|
|
|
# Restore current instance
|
|
current_bd_instance $oldCurInst
|
|
}
|
|
|
|
# Hierarchical cell: rx_mxfe_tpl_core
|
|
proc create_hier_cell_rx_mxfe_tpl_core { parentCell nameHier } {
|
|
|
|
variable script_folder
|
|
|
|
if { $parentCell eq "" || $nameHier eq "" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2092 -severity "ERROR" "create_hier_cell_rx_mxfe_tpl_core() - Empty argument(s)!"}
|
|
return
|
|
}
|
|
|
|
# Get object for parentCell
|
|
set parentObj [get_bd_cells $parentCell]
|
|
if { $parentObj == "" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2090 -severity "ERROR" "Unable to find parent cell <$parentCell>!"}
|
|
return
|
|
}
|
|
|
|
# Make sure parentObj is hier blk
|
|
set parentType [get_property TYPE $parentObj]
|
|
if { $parentType ne "hier" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2091 -severity "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
|
|
return
|
|
}
|
|
|
|
# Save current instance; Restore later
|
|
set oldCurInst [current_bd_instance .]
|
|
|
|
# Set parent object as current
|
|
current_bd_instance $parentObj
|
|
|
|
# Create cell and set as current instance
|
|
set hier_obj [create_bd_cell -type hier $nameHier]
|
|
current_bd_instance $hier_obj
|
|
|
|
# Create interface pins
|
|
create_bd_intf_pin -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 s_axi
|
|
|
|
|
|
# Create pins
|
|
create_bd_pin -dir O -from 15 -to 0 adc_data_0
|
|
create_bd_pin -dir O -from 15 -to 0 adc_data_1
|
|
create_bd_pin -dir O -from 15 -to 0 adc_data_2
|
|
create_bd_pin -dir O -from 15 -to 0 adc_data_3
|
|
create_bd_pin -dir O -from 15 -to 0 adc_data_4
|
|
create_bd_pin -dir O -from 15 -to 0 adc_data_5
|
|
create_bd_pin -dir O -from 15 -to 0 adc_data_6
|
|
create_bd_pin -dir O -from 15 -to 0 adc_data_7
|
|
create_bd_pin -dir I adc_dovf
|
|
create_bd_pin -dir O -from 0 -to 0 adc_enable_0
|
|
create_bd_pin -dir O -from 0 -to 0 adc_enable_1
|
|
create_bd_pin -dir O -from 0 -to 0 adc_enable_2
|
|
create_bd_pin -dir O -from 0 -to 0 adc_enable_3
|
|
create_bd_pin -dir O -from 0 -to 0 adc_enable_4
|
|
create_bd_pin -dir O -from 0 -to 0 adc_enable_5
|
|
create_bd_pin -dir O -from 0 -to 0 adc_enable_6
|
|
create_bd_pin -dir O -from 0 -to 0 adc_enable_7
|
|
create_bd_pin -dir O adc_rst
|
|
create_bd_pin -dir I adc_sync_manual_req_in
|
|
create_bd_pin -dir O adc_sync_manual_req_out
|
|
create_bd_pin -dir O -from 0 -to 0 adc_valid_0
|
|
create_bd_pin -dir O -from 0 -to 0 adc_valid_1
|
|
create_bd_pin -dir O -from 0 -to 0 adc_valid_2
|
|
create_bd_pin -dir O -from 0 -to 0 adc_valid_3
|
|
create_bd_pin -dir O -from 0 -to 0 adc_valid_4
|
|
create_bd_pin -dir O -from 0 -to 0 adc_valid_5
|
|
create_bd_pin -dir O -from 0 -to 0 adc_valid_6
|
|
create_bd_pin -dir O -from 0 -to 0 adc_valid_7
|
|
create_bd_pin -dir I ext_sync_in
|
|
create_bd_pin -dir I -type clk link_clk
|
|
create_bd_pin -dir I -from 127 -to 0 link_data
|
|
create_bd_pin -dir I -from 3 -to 0 link_sof
|
|
create_bd_pin -dir I link_valid
|
|
create_bd_pin -dir I -type clk s_axi_aclk
|
|
create_bd_pin -dir I -type rst s_axi_aresetn
|
|
|
|
# Create instance: adc_tpl_core, and set properties
|
|
set adc_tpl_core [ create_bd_cell -type ip -vlnv analog.com:user:ad_ip_jesd204_tpl_adc:1.0 adc_tpl_core ]
|
|
set_property -dict [list \
|
|
CONFIG.BITS_PER_SAMPLE {16} \
|
|
CONFIG.CONVERTER_RESOLUTION {16} \
|
|
CONFIG.DMA_BITS_PER_SAMPLE {16} \
|
|
CONFIG.EXT_SYNC {1} \
|
|
CONFIG.NUM_CHANNELS {8} \
|
|
CONFIG.NUM_LANES {4} \
|
|
CONFIG.OCTETS_PER_BEAT {4} \
|
|
CONFIG.SAMPLES_PER_FRAME {1} \
|
|
] $adc_tpl_core
|
|
|
|
|
|
# Create instance: data_slice_0, and set properties
|
|
set data_slice_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 data_slice_0 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {15} \
|
|
CONFIG.DIN_TO {0} \
|
|
CONFIG.DIN_WIDTH {128} \
|
|
] $data_slice_0
|
|
|
|
|
|
# Create instance: data_slice_1, and set properties
|
|
set data_slice_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 data_slice_1 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {31} \
|
|
CONFIG.DIN_TO {16} \
|
|
CONFIG.DIN_WIDTH {128} \
|
|
] $data_slice_1
|
|
|
|
|
|
# Create instance: data_slice_2, and set properties
|
|
set data_slice_2 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 data_slice_2 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {47} \
|
|
CONFIG.DIN_TO {32} \
|
|
CONFIG.DIN_WIDTH {128} \
|
|
] $data_slice_2
|
|
|
|
|
|
# Create instance: data_slice_3, and set properties
|
|
set data_slice_3 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 data_slice_3 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {63} \
|
|
CONFIG.DIN_TO {48} \
|
|
CONFIG.DIN_WIDTH {128} \
|
|
] $data_slice_3
|
|
|
|
|
|
# Create instance: data_slice_4, and set properties
|
|
set data_slice_4 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 data_slice_4 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {79} \
|
|
CONFIG.DIN_TO {64} \
|
|
CONFIG.DIN_WIDTH {128} \
|
|
] $data_slice_4
|
|
|
|
|
|
# Create instance: data_slice_5, and set properties
|
|
set data_slice_5 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 data_slice_5 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {95} \
|
|
CONFIG.DIN_TO {80} \
|
|
CONFIG.DIN_WIDTH {128} \
|
|
] $data_slice_5
|
|
|
|
|
|
# Create instance: data_slice_6, and set properties
|
|
set data_slice_6 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 data_slice_6 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {111} \
|
|
CONFIG.DIN_TO {96} \
|
|
CONFIG.DIN_WIDTH {128} \
|
|
] $data_slice_6
|
|
|
|
|
|
# Create instance: data_slice_7, and set properties
|
|
set data_slice_7 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 data_slice_7 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {127} \
|
|
CONFIG.DIN_TO {112} \
|
|
CONFIG.DIN_WIDTH {128} \
|
|
] $data_slice_7
|
|
|
|
|
|
# Create instance: enable_slice_0, and set properties
|
|
set enable_slice_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 enable_slice_0 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {0} \
|
|
CONFIG.DIN_TO {0} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $enable_slice_0
|
|
|
|
|
|
# Create instance: enable_slice_1, and set properties
|
|
set enable_slice_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 enable_slice_1 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {1} \
|
|
CONFIG.DIN_TO {1} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $enable_slice_1
|
|
|
|
|
|
# Create instance: enable_slice_2, and set properties
|
|
set enable_slice_2 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 enable_slice_2 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {2} \
|
|
CONFIG.DIN_TO {2} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $enable_slice_2
|
|
|
|
|
|
# Create instance: enable_slice_3, and set properties
|
|
set enable_slice_3 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 enable_slice_3 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {3} \
|
|
CONFIG.DIN_TO {3} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $enable_slice_3
|
|
|
|
|
|
# Create instance: enable_slice_4, and set properties
|
|
set enable_slice_4 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 enable_slice_4 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {4} \
|
|
CONFIG.DIN_TO {4} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $enable_slice_4
|
|
|
|
|
|
# Create instance: enable_slice_5, and set properties
|
|
set enable_slice_5 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 enable_slice_5 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {5} \
|
|
CONFIG.DIN_TO {5} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $enable_slice_5
|
|
|
|
|
|
# Create instance: enable_slice_6, and set properties
|
|
set enable_slice_6 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 enable_slice_6 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {6} \
|
|
CONFIG.DIN_TO {6} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $enable_slice_6
|
|
|
|
|
|
# Create instance: enable_slice_7, and set properties
|
|
set enable_slice_7 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 enable_slice_7 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {7} \
|
|
CONFIG.DIN_TO {7} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $enable_slice_7
|
|
|
|
|
|
# Create instance: valid_slice_0, and set properties
|
|
set valid_slice_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 valid_slice_0 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {0} \
|
|
CONFIG.DIN_TO {0} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $valid_slice_0
|
|
|
|
|
|
# Create instance: valid_slice_1, and set properties
|
|
set valid_slice_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 valid_slice_1 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {1} \
|
|
CONFIG.DIN_TO {1} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $valid_slice_1
|
|
|
|
|
|
# Create instance: valid_slice_2, and set properties
|
|
set valid_slice_2 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 valid_slice_2 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {2} \
|
|
CONFIG.DIN_TO {2} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $valid_slice_2
|
|
|
|
|
|
# Create instance: valid_slice_3, and set properties
|
|
set valid_slice_3 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 valid_slice_3 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {3} \
|
|
CONFIG.DIN_TO {3} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $valid_slice_3
|
|
|
|
|
|
# Create instance: valid_slice_4, and set properties
|
|
set valid_slice_4 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 valid_slice_4 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {4} \
|
|
CONFIG.DIN_TO {4} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $valid_slice_4
|
|
|
|
|
|
# Create instance: valid_slice_5, and set properties
|
|
set valid_slice_5 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 valid_slice_5 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {5} \
|
|
CONFIG.DIN_TO {5} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $valid_slice_5
|
|
|
|
|
|
# Create instance: valid_slice_6, and set properties
|
|
set valid_slice_6 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 valid_slice_6 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {6} \
|
|
CONFIG.DIN_TO {6} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $valid_slice_6
|
|
|
|
|
|
# Create instance: valid_slice_7, and set properties
|
|
set valid_slice_7 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlslice:1.0 valid_slice_7 ]
|
|
set_property -dict [list \
|
|
CONFIG.DIN_FROM {7} \
|
|
CONFIG.DIN_TO {7} \
|
|
CONFIG.DIN_WIDTH {8} \
|
|
] $valid_slice_7
|
|
|
|
|
|
# Create interface connections
|
|
connect_bd_intf_net -intf_net s_axi_1 [get_bd_intf_pins s_axi] [get_bd_intf_pins adc_tpl_core/s_axi]
|
|
|
|
# Create port connections
|
|
connect_bd_net -net adc_dovf_1 [get_bd_pins adc_dovf] [get_bd_pins adc_tpl_core/adc_dovf]
|
|
connect_bd_net -net adc_sync_manual_req_in_1 [get_bd_pins adc_sync_manual_req_in] [get_bd_pins adc_tpl_core/adc_sync_manual_req_in]
|
|
connect_bd_net -net adc_tpl_core_adc_data [get_bd_pins adc_tpl_core/adc_data] [get_bd_pins data_slice_0/Din] [get_bd_pins data_slice_1/Din] [get_bd_pins data_slice_2/Din] [get_bd_pins data_slice_3/Din] [get_bd_pins data_slice_4/Din] [get_bd_pins data_slice_5/Din] [get_bd_pins data_slice_6/Din] [get_bd_pins data_slice_7/Din]
|
|
connect_bd_net -net adc_tpl_core_adc_rst [get_bd_pins adc_rst] [get_bd_pins adc_tpl_core/adc_rst]
|
|
connect_bd_net -net adc_tpl_core_adc_sync_manual_req_out [get_bd_pins adc_sync_manual_req_out] [get_bd_pins adc_tpl_core/adc_sync_manual_req_out]
|
|
connect_bd_net -net adc_tpl_core_adc_valid [get_bd_pins adc_tpl_core/adc_valid] [get_bd_pins valid_slice_0/Din] [get_bd_pins valid_slice_1/Din] [get_bd_pins valid_slice_2/Din] [get_bd_pins valid_slice_3/Din] [get_bd_pins valid_slice_4/Din] [get_bd_pins valid_slice_5/Din] [get_bd_pins valid_slice_6/Din] [get_bd_pins valid_slice_7/Din]
|
|
connect_bd_net -net adc_tpl_core_enable [get_bd_pins adc_tpl_core/enable] [get_bd_pins enable_slice_0/Din] [get_bd_pins enable_slice_1/Din] [get_bd_pins enable_slice_2/Din] [get_bd_pins enable_slice_3/Din] [get_bd_pins enable_slice_4/Din] [get_bd_pins enable_slice_5/Din] [get_bd_pins enable_slice_6/Din] [get_bd_pins enable_slice_7/Din]
|
|
connect_bd_net -net data_slice_0_Dout [get_bd_pins adc_data_0] [get_bd_pins data_slice_0/Dout]
|
|
connect_bd_net -net data_slice_1_Dout [get_bd_pins adc_data_1] [get_bd_pins data_slice_1/Dout]
|
|
connect_bd_net -net data_slice_2_Dout [get_bd_pins adc_data_2] [get_bd_pins data_slice_2/Dout]
|
|
connect_bd_net -net data_slice_3_Dout [get_bd_pins adc_data_3] [get_bd_pins data_slice_3/Dout]
|
|
connect_bd_net -net data_slice_4_Dout [get_bd_pins adc_data_4] [get_bd_pins data_slice_4/Dout]
|
|
connect_bd_net -net data_slice_5_Dout [get_bd_pins adc_data_5] [get_bd_pins data_slice_5/Dout]
|
|
connect_bd_net -net data_slice_6_Dout [get_bd_pins adc_data_6] [get_bd_pins data_slice_6/Dout]
|
|
connect_bd_net -net data_slice_7_Dout [get_bd_pins adc_data_7] [get_bd_pins data_slice_7/Dout]
|
|
connect_bd_net -net enable_slice_0_Dout [get_bd_pins adc_enable_0] [get_bd_pins enable_slice_0/Dout]
|
|
connect_bd_net -net enable_slice_1_Dout [get_bd_pins adc_enable_1] [get_bd_pins enable_slice_1/Dout]
|
|
connect_bd_net -net enable_slice_2_Dout [get_bd_pins adc_enable_2] [get_bd_pins enable_slice_2/Dout]
|
|
connect_bd_net -net enable_slice_3_Dout [get_bd_pins adc_enable_3] [get_bd_pins enable_slice_3/Dout]
|
|
connect_bd_net -net enable_slice_4_Dout [get_bd_pins adc_enable_4] [get_bd_pins enable_slice_4/Dout]
|
|
connect_bd_net -net enable_slice_5_Dout [get_bd_pins adc_enable_5] [get_bd_pins enable_slice_5/Dout]
|
|
connect_bd_net -net enable_slice_6_Dout [get_bd_pins adc_enable_6] [get_bd_pins enable_slice_6/Dout]
|
|
connect_bd_net -net enable_slice_7_Dout [get_bd_pins adc_enable_7] [get_bd_pins enable_slice_7/Dout]
|
|
connect_bd_net -net ext_sync_in_1 [get_bd_pins ext_sync_in] [get_bd_pins adc_tpl_core/adc_sync_in]
|
|
connect_bd_net -net link_clk_1 [get_bd_pins link_clk] [get_bd_pins adc_tpl_core/link_clk]
|
|
connect_bd_net -net link_data_1 [get_bd_pins link_data] [get_bd_pins adc_tpl_core/link_data]
|
|
connect_bd_net -net link_sof_1 [get_bd_pins link_sof] [get_bd_pins adc_tpl_core/link_sof]
|
|
connect_bd_net -net link_valid_1 [get_bd_pins link_valid] [get_bd_pins adc_tpl_core/link_valid]
|
|
connect_bd_net -net s_axi_aclk_1 [get_bd_pins s_axi_aclk] [get_bd_pins adc_tpl_core/s_axi_aclk]
|
|
connect_bd_net -net s_axi_aresetn_1 [get_bd_pins s_axi_aresetn] [get_bd_pins adc_tpl_core/s_axi_aresetn]
|
|
connect_bd_net -net valid_slice_0_Dout [get_bd_pins adc_valid_0] [get_bd_pins valid_slice_0/Dout]
|
|
connect_bd_net -net valid_slice_1_Dout [get_bd_pins adc_valid_1] [get_bd_pins valid_slice_1/Dout]
|
|
connect_bd_net -net valid_slice_2_Dout [get_bd_pins adc_valid_2] [get_bd_pins valid_slice_2/Dout]
|
|
connect_bd_net -net valid_slice_3_Dout [get_bd_pins adc_valid_3] [get_bd_pins valid_slice_3/Dout]
|
|
connect_bd_net -net valid_slice_4_Dout [get_bd_pins adc_valid_4] [get_bd_pins valid_slice_4/Dout]
|
|
connect_bd_net -net valid_slice_5_Dout [get_bd_pins adc_valid_5] [get_bd_pins valid_slice_5/Dout]
|
|
connect_bd_net -net valid_slice_6_Dout [get_bd_pins adc_valid_6] [get_bd_pins valid_slice_6/Dout]
|
|
connect_bd_net -net valid_slice_7_Dout [get_bd_pins adc_valid_7] [get_bd_pins valid_slice_7/Dout]
|
|
|
|
# Restore current instance
|
|
current_bd_instance $oldCurInst
|
|
}
|
|
|
|
# Hierarchical cell: mxfe_tx_data_offload
|
|
proc create_hier_cell_mxfe_tx_data_offload { parentCell nameHier } {
|
|
|
|
variable script_folder
|
|
|
|
if { $parentCell eq "" || $nameHier eq "" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2092 -severity "ERROR" "create_hier_cell_mxfe_tx_data_offload() - Empty argument(s)!"}
|
|
return
|
|
}
|
|
|
|
# Get object for parentCell
|
|
set parentObj [get_bd_cells $parentCell]
|
|
if { $parentObj == "" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2090 -severity "ERROR" "Unable to find parent cell <$parentCell>!"}
|
|
return
|
|
}
|
|
|
|
# Make sure parentObj is hier blk
|
|
set parentType [get_property TYPE $parentObj]
|
|
if { $parentType ne "hier" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2091 -severity "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
|
|
return
|
|
}
|
|
|
|
# Save current instance; Restore later
|
|
set oldCurInst [current_bd_instance .]
|
|
|
|
# Set parent object as current
|
|
current_bd_instance $parentObj
|
|
|
|
# Create cell and set as current instance
|
|
set hier_obj [create_bd_cell -type hier $nameHier]
|
|
current_bd_instance $hier_obj
|
|
|
|
# Create interface pins
|
|
create_bd_intf_pin -mode Master -vlnv xilinx.com:interface:axis_rtl:1.0 m_axis
|
|
|
|
create_bd_intf_pin -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 s_axi
|
|
|
|
create_bd_intf_pin -mode Slave -vlnv xilinx.com:interface:axis_rtl:1.0 s_axis
|
|
|
|
|
|
# Create pins
|
|
create_bd_pin -dir I init_req
|
|
create_bd_pin -dir I -type clk m_axis_aclk
|
|
create_bd_pin -dir I -type rst m_axis_aresetn
|
|
create_bd_pin -dir I -type clk s_axi_aclk
|
|
create_bd_pin -dir I -type rst s_axi_aresetn
|
|
create_bd_pin -dir I -type clk s_axis_aclk
|
|
create_bd_pin -dir I -type rst s_axis_aresetn
|
|
create_bd_pin -dir I sync_ext
|
|
|
|
# Create instance: i_data_offload, and set properties
|
|
set i_data_offload [ create_bd_cell -type ip -vlnv analog.com:user:data_offload:1.0 i_data_offload ]
|
|
set_property -dict [list \
|
|
CONFIG.DST_CYCLIC_EN {true} \
|
|
CONFIG.DST_DATA_WIDTH {128} \
|
|
CONFIG.MEM_SIZE_LOG2 {20} \
|
|
CONFIG.MEM_TYPE {0} \
|
|
CONFIG.SRC_DATA_WIDTH {128} \
|
|
CONFIG.SYNC_EXT_ADD_INTERNAL_CDC {true} \
|
|
CONFIG.TX_OR_RXN_PATH {1} \
|
|
] $i_data_offload
|
|
|
|
|
|
# Create instance: storage_unit, and set properties
|
|
set storage_unit [ create_bd_cell -type ip -vlnv analog.com:user:util_do_ram:1.0 storage_unit ]
|
|
set_property -dict [list \
|
|
CONFIG.DST_DATA_WIDTH {128} \
|
|
CONFIG.LENGTH_WIDTH {20} \
|
|
CONFIG.SRC_DATA_WIDTH {128} \
|
|
] $storage_unit
|
|
|
|
|
|
# Create interface connections
|
|
connect_bd_intf_net -intf_net i_data_offload_m_axis [get_bd_intf_pins m_axis] [get_bd_intf_pins i_data_offload/m_axis]
|
|
connect_bd_intf_net -intf_net i_data_offload_m_storage_axis [get_bd_intf_pins i_data_offload/m_storage_axis] [get_bd_intf_pins storage_unit/s_axis]
|
|
connect_bd_intf_net -intf_net i_data_offload_rd_ctrl [get_bd_intf_pins i_data_offload/rd_ctrl] [get_bd_intf_pins storage_unit/rd_ctrl]
|
|
connect_bd_intf_net -intf_net i_data_offload_wr_ctrl [get_bd_intf_pins i_data_offload/wr_ctrl] [get_bd_intf_pins storage_unit/wr_ctrl]
|
|
connect_bd_intf_net -intf_net s_axi_1 [get_bd_intf_pins s_axi] [get_bd_intf_pins i_data_offload/s_axi]
|
|
connect_bd_intf_net -intf_net s_axis_1 [get_bd_intf_pins s_axis] [get_bd_intf_pins i_data_offload/s_axis]
|
|
connect_bd_intf_net -intf_net storage_unit_m_axis [get_bd_intf_pins i_data_offload/s_storage_axis] [get_bd_intf_pins storage_unit/m_axis]
|
|
|
|
# Create port connections
|
|
connect_bd_net -net init_req_1 [get_bd_pins init_req] [get_bd_pins i_data_offload/init_req]
|
|
connect_bd_net -net m_axis_aclk_1 [get_bd_pins m_axis_aclk] [get_bd_pins i_data_offload/m_axis_aclk] [get_bd_pins storage_unit/m_axis_aclk]
|
|
connect_bd_net -net m_axis_aresetn_1 [get_bd_pins m_axis_aresetn] [get_bd_pins i_data_offload/m_axis_aresetn] [get_bd_pins storage_unit/m_axis_aresetn]
|
|
connect_bd_net -net s_axi_aclk_1 [get_bd_pins s_axi_aclk] [get_bd_pins i_data_offload/s_axi_aclk]
|
|
connect_bd_net -net s_axi_aresetn_1 [get_bd_pins s_axi_aresetn] [get_bd_pins i_data_offload/s_axi_aresetn]
|
|
connect_bd_net -net s_axis_aclk_1 [get_bd_pins s_axis_aclk] [get_bd_pins i_data_offload/s_axis_aclk] [get_bd_pins storage_unit/s_axis_aclk]
|
|
connect_bd_net -net s_axis_aresetn_1 [get_bd_pins s_axis_aresetn] [get_bd_pins i_data_offload/s_axis_aresetn] [get_bd_pins storage_unit/s_axis_aresetn]
|
|
connect_bd_net -net sync_ext_1 [get_bd_pins sync_ext] [get_bd_pins i_data_offload/sync_ext]
|
|
|
|
# Restore current instance
|
|
current_bd_instance $oldCurInst
|
|
}
|
|
|
|
# Hierarchical cell: mxfe_rx_data_offload
|
|
proc create_hier_cell_mxfe_rx_data_offload { parentCell nameHier } {
|
|
|
|
variable script_folder
|
|
|
|
if { $parentCell eq "" || $nameHier eq "" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2092 -severity "ERROR" "create_hier_cell_mxfe_rx_data_offload() - Empty argument(s)!"}
|
|
return
|
|
}
|
|
|
|
# Get object for parentCell
|
|
set parentObj [get_bd_cells $parentCell]
|
|
if { $parentObj == "" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2090 -severity "ERROR" "Unable to find parent cell <$parentCell>!"}
|
|
return
|
|
}
|
|
|
|
# Make sure parentObj is hier blk
|
|
set parentType [get_property TYPE $parentObj]
|
|
if { $parentType ne "hier" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2091 -severity "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
|
|
return
|
|
}
|
|
|
|
# Save current instance; Restore later
|
|
set oldCurInst [current_bd_instance .]
|
|
|
|
# Set parent object as current
|
|
current_bd_instance $parentObj
|
|
|
|
# Create cell and set as current instance
|
|
set hier_obj [create_bd_cell -type hier $nameHier]
|
|
current_bd_instance $hier_obj
|
|
|
|
# Create interface pins
|
|
create_bd_intf_pin -mode Master -vlnv xilinx.com:interface:axis_rtl:1.0 m_axis
|
|
|
|
create_bd_intf_pin -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 s_axi
|
|
|
|
create_bd_intf_pin -mode Slave -vlnv xilinx.com:interface:axis_rtl:1.0 s_axis
|
|
|
|
|
|
# Create pins
|
|
create_bd_pin -dir I init_req
|
|
create_bd_pin -dir I -type clk m_axis_aclk
|
|
create_bd_pin -dir I -type rst m_axis_aresetn
|
|
create_bd_pin -dir I -type clk s_axi_aclk
|
|
create_bd_pin -dir I -type rst s_axi_aresetn
|
|
create_bd_pin -dir I -type clk s_axis_aclk
|
|
create_bd_pin -dir I -type rst s_axis_aresetn
|
|
create_bd_pin -dir I sync_ext
|
|
|
|
# Create instance: i_data_offload, and set properties
|
|
set i_data_offload [ create_bd_cell -type ip -vlnv analog.com:user:data_offload:1.0 i_data_offload ]
|
|
set_property -dict [list \
|
|
CONFIG.DST_DATA_WIDTH {128} \
|
|
CONFIG.MEM_SIZE_LOG2 {20} \
|
|
CONFIG.MEM_TYPE {0} \
|
|
CONFIG.SRC_DATA_WIDTH {128} \
|
|
CONFIG.SYNC_EXT_ADD_INTERNAL_CDC {true} \
|
|
CONFIG.TX_OR_RXN_PATH {0} \
|
|
] $i_data_offload
|
|
|
|
|
|
# Create instance: storage_unit, and set properties
|
|
set storage_unit [ create_bd_cell -type ip -vlnv analog.com:user:util_do_ram:1.0 storage_unit ]
|
|
set_property -dict [list \
|
|
CONFIG.DST_DATA_WIDTH {128} \
|
|
CONFIG.LENGTH_WIDTH {20} \
|
|
CONFIG.SRC_DATA_WIDTH {128} \
|
|
] $storage_unit
|
|
|
|
|
|
# Create interface connections
|
|
connect_bd_intf_net -intf_net i_data_offload_m_axis [get_bd_intf_pins m_axis] [get_bd_intf_pins i_data_offload/m_axis]
|
|
connect_bd_intf_net -intf_net i_data_offload_m_storage_axis [get_bd_intf_pins i_data_offload/m_storage_axis] [get_bd_intf_pins storage_unit/s_axis]
|
|
connect_bd_intf_net -intf_net i_data_offload_rd_ctrl [get_bd_intf_pins i_data_offload/rd_ctrl] [get_bd_intf_pins storage_unit/rd_ctrl]
|
|
connect_bd_intf_net -intf_net i_data_offload_wr_ctrl [get_bd_intf_pins i_data_offload/wr_ctrl] [get_bd_intf_pins storage_unit/wr_ctrl]
|
|
connect_bd_intf_net -intf_net s_axi_1 [get_bd_intf_pins s_axi] [get_bd_intf_pins i_data_offload/s_axi]
|
|
connect_bd_intf_net -intf_net s_axis_1 [get_bd_intf_pins s_axis] [get_bd_intf_pins i_data_offload/s_axis]
|
|
connect_bd_intf_net -intf_net storage_unit_m_axis [get_bd_intf_pins i_data_offload/s_storage_axis] [get_bd_intf_pins storage_unit/m_axis]
|
|
|
|
# Create port connections
|
|
connect_bd_net -net init_req_1 [get_bd_pins init_req] [get_bd_pins i_data_offload/init_req]
|
|
connect_bd_net -net m_axis_aclk_1 [get_bd_pins m_axis_aclk] [get_bd_pins i_data_offload/m_axis_aclk] [get_bd_pins storage_unit/m_axis_aclk]
|
|
connect_bd_net -net m_axis_aresetn_1 [get_bd_pins m_axis_aresetn] [get_bd_pins i_data_offload/m_axis_aresetn] [get_bd_pins storage_unit/m_axis_aresetn]
|
|
connect_bd_net -net s_axi_aclk_1 [get_bd_pins s_axi_aclk] [get_bd_pins i_data_offload/s_axi_aclk]
|
|
connect_bd_net -net s_axi_aresetn_1 [get_bd_pins s_axi_aresetn] [get_bd_pins i_data_offload/s_axi_aresetn]
|
|
connect_bd_net -net s_axis_aclk_1 [get_bd_pins s_axis_aclk] [get_bd_pins i_data_offload/s_axis_aclk] [get_bd_pins storage_unit/s_axis_aclk]
|
|
connect_bd_net -net s_axis_aresetn_1 [get_bd_pins s_axis_aresetn] [get_bd_pins i_data_offload/s_axis_aresetn] [get_bd_pins storage_unit/s_axis_aresetn]
|
|
connect_bd_net -net sync_ext_1 [get_bd_pins sync_ext] [get_bd_pins i_data_offload/sync_ext]
|
|
|
|
# Restore current instance
|
|
current_bd_instance $oldCurInst
|
|
}
|
|
|
|
# Hierarchical cell: axi_mxfe_tx_jesd
|
|
proc create_hier_cell_axi_mxfe_tx_jesd { parentCell nameHier } {
|
|
|
|
variable script_folder
|
|
|
|
if { $parentCell eq "" || $nameHier eq "" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2092 -severity "ERROR" "create_hier_cell_axi_mxfe_tx_jesd() - Empty argument(s)!"}
|
|
return
|
|
}
|
|
|
|
# Get object for parentCell
|
|
set parentObj [get_bd_cells $parentCell]
|
|
if { $parentObj == "" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2090 -severity "ERROR" "Unable to find parent cell <$parentCell>!"}
|
|
return
|
|
}
|
|
|
|
# Make sure parentObj is hier blk
|
|
set parentType [get_property TYPE $parentObj]
|
|
if { $parentType ne "hier" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2091 -severity "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
|
|
return
|
|
}
|
|
|
|
# Save current instance; Restore later
|
|
set oldCurInst [current_bd_instance .]
|
|
|
|
# Set parent object as current
|
|
current_bd_instance $parentObj
|
|
|
|
# Create cell and set as current instance
|
|
set hier_obj [create_bd_cell -type hier $nameHier]
|
|
current_bd_instance $hier_obj
|
|
|
|
# Create interface pins
|
|
create_bd_intf_pin -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 s_axi
|
|
|
|
create_bd_intf_pin -mode Slave -vlnv xilinx.com:interface:axis_rtl:1.0 tx_data
|
|
|
|
create_bd_intf_pin -mode Master -vlnv xilinx.com:display_jesd204:jesd204_tx_bus_rtl:1.0 tx_phy0
|
|
|
|
create_bd_intf_pin -mode Master -vlnv xilinx.com:display_jesd204:jesd204_tx_bus_rtl:1.0 tx_phy1
|
|
|
|
create_bd_intf_pin -mode Master -vlnv xilinx.com:display_jesd204:jesd204_tx_bus_rtl:1.0 tx_phy2
|
|
|
|
create_bd_intf_pin -mode Master -vlnv xilinx.com:display_jesd204:jesd204_tx_bus_rtl:1.0 tx_phy3
|
|
|
|
|
|
# Create pins
|
|
create_bd_pin -dir I -type clk device_clk
|
|
create_bd_pin -dir O -type intr irq
|
|
create_bd_pin -dir I -type clk link_clk
|
|
create_bd_pin -dir I -type clk s_axi_aclk
|
|
create_bd_pin -dir I -type rst s_axi_aresetn
|
|
create_bd_pin -dir I -from 0 -to 0 sync
|
|
create_bd_pin -dir I sysref
|
|
|
|
# Create instance: tx, and set properties
|
|
set tx [ create_bd_cell -type ip -vlnv analog.com:user:jesd204_tx:1.0 tx ]
|
|
set_property -dict [list \
|
|
CONFIG.LINK_MODE {1} \
|
|
CONFIG.NUM_LANES {4} \
|
|
CONFIG.NUM_LINKS {1} \
|
|
CONFIG.SYSREF_IOB {false} \
|
|
CONFIG.TPL_DATA_PATH_WIDTH {4} \
|
|
] $tx
|
|
|
|
|
|
# Create instance: tx_axi, and set properties
|
|
set tx_axi [ create_bd_cell -type ip -vlnv analog.com:user:axi_jesd204_tx:1.0 tx_axi ]
|
|
set_property -dict [list \
|
|
CONFIG.LINK_MODE {1} \
|
|
CONFIG.NUM_LANES {4} \
|
|
CONFIG.NUM_LINKS {1} \
|
|
] $tx_axi
|
|
|
|
|
|
# Create interface connections
|
|
connect_bd_intf_net -intf_net s_axi_1 [get_bd_intf_pins s_axi] [get_bd_intf_pins tx_axi/s_axi]
|
|
connect_bd_intf_net -intf_net tx_axi_tx_cfg [get_bd_intf_pins tx/tx_cfg] [get_bd_intf_pins tx_axi/tx_cfg]
|
|
connect_bd_intf_net -intf_net tx_axi_tx_ctrl [get_bd_intf_pins tx/tx_ctrl] [get_bd_intf_pins tx_axi/tx_ctrl]
|
|
connect_bd_intf_net -intf_net tx_data_1 [get_bd_intf_pins tx_data] [get_bd_intf_pins tx/tx_data]
|
|
connect_bd_intf_net -intf_net tx_tx_event [get_bd_intf_pins tx/tx_event] [get_bd_intf_pins tx_axi/tx_event]
|
|
connect_bd_intf_net -intf_net tx_tx_ilas_config [get_bd_intf_pins tx/tx_ilas_config] [get_bd_intf_pins tx_axi/tx_ilas_config]
|
|
connect_bd_intf_net -intf_net tx_tx_phy0 [get_bd_intf_pins tx_phy0] [get_bd_intf_pins tx/tx_phy0]
|
|
connect_bd_intf_net -intf_net tx_tx_phy1 [get_bd_intf_pins tx_phy1] [get_bd_intf_pins tx/tx_phy1]
|
|
connect_bd_intf_net -intf_net tx_tx_phy2 [get_bd_intf_pins tx_phy2] [get_bd_intf_pins tx/tx_phy2]
|
|
connect_bd_intf_net -intf_net tx_tx_phy3 [get_bd_intf_pins tx_phy3] [get_bd_intf_pins tx/tx_phy3]
|
|
connect_bd_intf_net -intf_net tx_tx_status [get_bd_intf_pins tx/tx_status] [get_bd_intf_pins tx_axi/tx_status]
|
|
|
|
# Create port connections
|
|
connect_bd_net -net device_clk_1 [get_bd_pins device_clk] [get_bd_pins tx/device_clk] [get_bd_pins tx_axi/device_clk]
|
|
connect_bd_net -net link_clk_1 [get_bd_pins link_clk] [get_bd_pins tx/clk] [get_bd_pins tx_axi/core_clk]
|
|
connect_bd_net -net s_axi_aclk_1 [get_bd_pins s_axi_aclk] [get_bd_pins tx_axi/s_axi_aclk]
|
|
connect_bd_net -net s_axi_aresetn_1 [get_bd_pins s_axi_aresetn] [get_bd_pins tx_axi/s_axi_aresetn]
|
|
connect_bd_net -net sync_1 [get_bd_pins sync] [get_bd_pins tx/sync]
|
|
connect_bd_net -net sysref_1 [get_bd_pins sysref] [get_bd_pins tx/sysref]
|
|
connect_bd_net -net tx_axi_core_reset [get_bd_pins tx/reset] [get_bd_pins tx_axi/core_reset]
|
|
connect_bd_net -net tx_axi_device_reset [get_bd_pins tx/device_reset] [get_bd_pins tx_axi/device_reset]
|
|
connect_bd_net -net tx_axi_irq [get_bd_pins irq] [get_bd_pins tx_axi/irq]
|
|
|
|
# Restore current instance
|
|
current_bd_instance $oldCurInst
|
|
}
|
|
|
|
# Hierarchical cell: axi_mxfe_rx_jesd
|
|
proc create_hier_cell_axi_mxfe_rx_jesd { parentCell nameHier } {
|
|
|
|
variable script_folder
|
|
|
|
if { $parentCell eq "" || $nameHier eq "" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2092 -severity "ERROR" "create_hier_cell_axi_mxfe_rx_jesd() - Empty argument(s)!"}
|
|
return
|
|
}
|
|
|
|
# Get object for parentCell
|
|
set parentObj [get_bd_cells $parentCell]
|
|
if { $parentObj == "" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2090 -severity "ERROR" "Unable to find parent cell <$parentCell>!"}
|
|
return
|
|
}
|
|
|
|
# Make sure parentObj is hier blk
|
|
set parentType [get_property TYPE $parentObj]
|
|
if { $parentType ne "hier" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2091 -severity "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
|
|
return
|
|
}
|
|
|
|
# Save current instance; Restore later
|
|
set oldCurInst [current_bd_instance .]
|
|
|
|
# Set parent object as current
|
|
current_bd_instance $parentObj
|
|
|
|
# Create cell and set as current instance
|
|
set hier_obj [create_bd_cell -type hier $nameHier]
|
|
current_bd_instance $hier_obj
|
|
|
|
# Create interface pins
|
|
create_bd_intf_pin -mode Slave -vlnv xilinx.com:display_jesd204:jesd204_rx_bus_rtl:1.0 rx_phy0
|
|
|
|
create_bd_intf_pin -mode Slave -vlnv xilinx.com:display_jesd204:jesd204_rx_bus_rtl:1.0 rx_phy1
|
|
|
|
create_bd_intf_pin -mode Slave -vlnv xilinx.com:display_jesd204:jesd204_rx_bus_rtl:1.0 rx_phy2
|
|
|
|
create_bd_intf_pin -mode Slave -vlnv xilinx.com:display_jesd204:jesd204_rx_bus_rtl:1.0 rx_phy3
|
|
|
|
create_bd_intf_pin -mode Slave -vlnv xilinx.com:interface:aximm_rtl:1.0 s_axi
|
|
|
|
|
|
# Create pins
|
|
create_bd_pin -dir I -type clk device_clk
|
|
create_bd_pin -dir O -type intr irq
|
|
create_bd_pin -dir I -type clk link_clk
|
|
create_bd_pin -dir O phy_en_char_align
|
|
create_bd_pin -dir O -from 127 -to 0 rx_data_tdata
|
|
create_bd_pin -dir O rx_data_tvalid
|
|
create_bd_pin -dir O -from 3 -to 0 rx_eof
|
|
create_bd_pin -dir O -from 3 -to 0 rx_sof
|
|
create_bd_pin -dir I -type clk s_axi_aclk
|
|
create_bd_pin -dir I -type rst s_axi_aresetn
|
|
create_bd_pin -dir O -from 0 -to 0 sync
|
|
create_bd_pin -dir I sysref
|
|
|
|
# Create instance: rx, and set properties
|
|
set rx [ create_bd_cell -type ip -vlnv analog.com:user:jesd204_rx:1.0 rx ]
|
|
set_property -dict [list \
|
|
CONFIG.LINK_MODE {1} \
|
|
CONFIG.NUM_INPUT_PIPELINE {1} \
|
|
CONFIG.NUM_LANES {4} \
|
|
CONFIG.NUM_LINKS {1} \
|
|
CONFIG.SYSREF_IOB {false} \
|
|
CONFIG.TPL_DATA_PATH_WIDTH {4} \
|
|
] $rx
|
|
|
|
|
|
# Create instance: rx_axi, and set properties
|
|
set rx_axi [ create_bd_cell -type ip -vlnv analog.com:user:axi_jesd204_rx:1.0 rx_axi ]
|
|
set_property -dict [list \
|
|
CONFIG.LINK_MODE {1} \
|
|
CONFIG.NUM_LANES {4} \
|
|
CONFIG.NUM_LINKS {1} \
|
|
] $rx_axi
|
|
|
|
|
|
# Create interface connections
|
|
connect_bd_intf_net -intf_net rx_axi_rx_cfg [get_bd_intf_pins rx/rx_cfg] [get_bd_intf_pins rx_axi/rx_cfg]
|
|
connect_bd_intf_net -intf_net rx_phy0_1 [get_bd_intf_pins rx_phy0] [get_bd_intf_pins rx/rx_phy0]
|
|
connect_bd_intf_net -intf_net rx_phy1_1 [get_bd_intf_pins rx_phy1] [get_bd_intf_pins rx/rx_phy1]
|
|
connect_bd_intf_net -intf_net rx_phy2_1 [get_bd_intf_pins rx_phy2] [get_bd_intf_pins rx/rx_phy2]
|
|
connect_bd_intf_net -intf_net rx_phy3_1 [get_bd_intf_pins rx_phy3] [get_bd_intf_pins rx/rx_phy3]
|
|
connect_bd_intf_net -intf_net rx_rx_event [get_bd_intf_pins rx/rx_event] [get_bd_intf_pins rx_axi/rx_event]
|
|
connect_bd_intf_net -intf_net rx_rx_ilas_config [get_bd_intf_pins rx/rx_ilas_config] [get_bd_intf_pins rx_axi/rx_ilas_config]
|
|
connect_bd_intf_net -intf_net rx_rx_status [get_bd_intf_pins rx/rx_status] [get_bd_intf_pins rx_axi/rx_status]
|
|
connect_bd_intf_net -intf_net s_axi_1 [get_bd_intf_pins s_axi] [get_bd_intf_pins rx_axi/s_axi]
|
|
|
|
# Create port connections
|
|
connect_bd_net -net device_clk_1 [get_bd_pins device_clk] [get_bd_pins rx/device_clk] [get_bd_pins rx_axi/device_clk]
|
|
connect_bd_net -net link_clk_1 [get_bd_pins link_clk] [get_bd_pins rx/clk] [get_bd_pins rx_axi/core_clk]
|
|
connect_bd_net -net rx_axi_core_reset [get_bd_pins rx/reset] [get_bd_pins rx_axi/core_reset]
|
|
connect_bd_net -net rx_axi_device_reset [get_bd_pins rx/device_reset] [get_bd_pins rx_axi/device_reset]
|
|
connect_bd_net -net rx_axi_irq [get_bd_pins irq] [get_bd_pins rx_axi/irq]
|
|
connect_bd_net -net rx_phy_en_char_align [get_bd_pins phy_en_char_align] [get_bd_pins rx/phy_en_char_align]
|
|
connect_bd_net -net rx_rx_data [get_bd_pins rx_data_tdata] [get_bd_pins rx/rx_data]
|
|
connect_bd_net -net rx_rx_eof [get_bd_pins rx_eof] [get_bd_pins rx/rx_eof]
|
|
connect_bd_net -net rx_rx_sof [get_bd_pins rx_sof] [get_bd_pins rx/rx_sof]
|
|
connect_bd_net -net rx_rx_valid [get_bd_pins rx_data_tvalid] [get_bd_pins rx/rx_valid]
|
|
connect_bd_net -net rx_sync [get_bd_pins sync] [get_bd_pins rx/sync]
|
|
connect_bd_net -net s_axi_aclk_1 [get_bd_pins s_axi_aclk] [get_bd_pins rx_axi/s_axi_aclk]
|
|
connect_bd_net -net s_axi_aresetn_1 [get_bd_pins s_axi_aresetn] [get_bd_pins rx_axi/s_axi_aresetn]
|
|
connect_bd_net -net sysref_1 [get_bd_pins sysref] [get_bd_pins rx/sysref]
|
|
|
|
# Restore current instance
|
|
current_bd_instance $oldCurInst
|
|
}
|
|
variable script_folder
|
|
|
|
if { $parentCell eq "" } {
|
|
set parentCell [get_bd_cells /]
|
|
}
|
|
|
|
# Get object for parentCell
|
|
set parentObj [get_bd_cells $parentCell]
|
|
if { $parentObj == "" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2090 -severity "ERROR" "Unable to find parent cell <$parentCell>!"}
|
|
return
|
|
}
|
|
|
|
# Make sure parentObj is hier blk
|
|
set parentType [get_property TYPE $parentObj]
|
|
if { $parentType ne "hier" } {
|
|
catch {common::send_gid_msg -ssname BD::TCL -id 2091 -severity "ERROR" "Parent <$parentObj> has TYPE = <$parentType>. Expected to be <hier>."}
|
|
return
|
|
}
|
|
|
|
# Save current instance; Restore later
|
|
set oldCurInst [current_bd_instance .]
|
|
|
|
# Set parent object as current
|
|
current_bd_instance $parentObj
|
|
|
|
|
|
# Create interface ports
|
|
|
|
# Create ports
|
|
set clk100_out [ create_bd_port -dir O -type clk clk100_out ]
|
|
set clk_in_1 [ create_bd_port -dir I clk_in_1 ]
|
|
set ext_sync_in [ create_bd_port -dir I ext_sync_in ]
|
|
set ext_trigger_in [ create_bd_port -dir I ext_trigger_in ]
|
|
set fpga_reboot_out_0 [ create_bd_port -dir O fpga_reboot_out_0 ]
|
|
set gpio_i [ create_bd_port -dir I -from 94 -to 0 gpio_i ]
|
|
set gpio_o [ create_bd_port -dir O -from 94 -to 0 gpio_o ]
|
|
set gpio_t [ create_bd_port -dir O -from 94 -to 0 gpio_t ]
|
|
set ref_clk_q0 [ create_bd_port -dir I ref_clk_q0 ]
|
|
set ref_clk_q1 [ create_bd_port -dir I ref_clk_q1 ]
|
|
set rx_data_0_n [ create_bd_port -dir I rx_data_0_n ]
|
|
set rx_data_0_p [ create_bd_port -dir I rx_data_0_p ]
|
|
set rx_data_1_n [ create_bd_port -dir I rx_data_1_n ]
|
|
set rx_data_1_p [ create_bd_port -dir I rx_data_1_p ]
|
|
set rx_data_2_n [ create_bd_port -dir I rx_data_2_n ]
|
|
set rx_data_2_p [ create_bd_port -dir I rx_data_2_p ]
|
|
set rx_data_3_n [ create_bd_port -dir I rx_data_3_n ]
|
|
set rx_data_3_p [ create_bd_port -dir I rx_data_3_p ]
|
|
set rx_data_4_n [ create_bd_port -dir I rx_data_4_n ]
|
|
set rx_data_4_p [ create_bd_port -dir I rx_data_4_p ]
|
|
set rx_data_5_n [ create_bd_port -dir I rx_data_5_n ]
|
|
set rx_data_5_p [ create_bd_port -dir I rx_data_5_p ]
|
|
set rx_data_6_n [ create_bd_port -dir I rx_data_6_n ]
|
|
set rx_data_6_p [ create_bd_port -dir I rx_data_6_p ]
|
|
set rx_data_7_n [ create_bd_port -dir I rx_data_7_n ]
|
|
set rx_data_7_p [ create_bd_port -dir I rx_data_7_p ]
|
|
set rx_device_clk [ create_bd_port -dir I rx_device_clk ]
|
|
set rx_sync_0 [ create_bd_port -dir O -from 0 -to 0 rx_sync_0 ]
|
|
set rx_sysref_0 [ create_bd_port -dir I rx_sysref_0 ]
|
|
set spi0_csn [ create_bd_port -dir O -from 2 -to 0 spi0_csn ]
|
|
set spi0_miso [ create_bd_port -dir I spi0_miso ]
|
|
set spi0_mosi [ create_bd_port -dir O spi0_mosi ]
|
|
set spi0_sclk [ create_bd_port -dir O spi0_sclk ]
|
|
set spi1_csn [ create_bd_port -dir O -from 2 -to 0 spi1_csn ]
|
|
set spi1_miso [ create_bd_port -dir I spi1_miso ]
|
|
set spi1_mosi [ create_bd_port -dir O spi1_mosi ]
|
|
set spi1_sclk [ create_bd_port -dir O spi1_sclk ]
|
|
set tx_data_0_n [ create_bd_port -dir O tx_data_0_n ]
|
|
set tx_data_0_p [ create_bd_port -dir O tx_data_0_p ]
|
|
set tx_data_1_n [ create_bd_port -dir O tx_data_1_n ]
|
|
set tx_data_1_p [ create_bd_port -dir O tx_data_1_p ]
|
|
set tx_data_2_n [ create_bd_port -dir O tx_data_2_n ]
|
|
set tx_data_2_p [ create_bd_port -dir O tx_data_2_p ]
|
|
set tx_data_3_n [ create_bd_port -dir O tx_data_3_n ]
|
|
set tx_data_3_p [ create_bd_port -dir O tx_data_3_p ]
|
|
set tx_data_4_n [ create_bd_port -dir O tx_data_4_n ]
|
|
set tx_data_4_p [ create_bd_port -dir O tx_data_4_p ]
|
|
set tx_data_5_n [ create_bd_port -dir O tx_data_5_n ]
|
|
set tx_data_5_p [ create_bd_port -dir O tx_data_5_p ]
|
|
set tx_data_6_n [ create_bd_port -dir O tx_data_6_n ]
|
|
set tx_data_6_p [ create_bd_port -dir O tx_data_6_p ]
|
|
set tx_data_7_n [ create_bd_port -dir O tx_data_7_n ]
|
|
set tx_data_7_p [ create_bd_port -dir O tx_data_7_p ]
|
|
set tx_device_clk [ create_bd_port -dir I tx_device_clk ]
|
|
set tx_sync_0 [ create_bd_port -dir I -from 0 -to 0 tx_sync_0 ]
|
|
set tx_sysref_0 [ create_bd_port -dir I tx_sysref_0 ]
|
|
|
|
# Create instance: GND_1, and set properties
|
|
set GND_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlconstant:1.1 GND_1 ]
|
|
set_property -dict [list \
|
|
CONFIG.CONST_VAL {0} \
|
|
CONFIG.CONST_WIDTH {1} \
|
|
] $GND_1
|
|
|
|
|
|
# Create instance: VCC_1, and set properties
|
|
set VCC_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlconstant:1.1 VCC_1 ]
|
|
set_property -dict [list \
|
|
CONFIG.CONST_VAL {1} \
|
|
CONFIG.CONST_WIDTH {1} \
|
|
] $VCC_1
|
|
|
|
|
|
# Create instance: axi_cpu_interconnect, and set properties
|
|
set axi_cpu_interconnect [ create_bd_cell -type ip -vlnv xilinx.com:ip:smartconnect:1.0 axi_cpu_interconnect ]
|
|
set_property -dict [list \
|
|
CONFIG.NUM_MI {16} \
|
|
CONFIG.NUM_SI {1} \
|
|
] $axi_cpu_interconnect
|
|
|
|
|
|
# Create instance: axi_hp0_interconnect, and set properties
|
|
set axi_hp0_interconnect [ create_bd_cell -type ip -vlnv xilinx.com:ip:smartconnect:1.0 axi_hp0_interconnect ]
|
|
set_property -dict [list \
|
|
CONFIG.NUM_MI {1} \
|
|
CONFIG.NUM_SI {1} \
|
|
] $axi_hp0_interconnect
|
|
|
|
|
|
# Create instance: axi_hp1_interconnect, and set properties
|
|
set axi_hp1_interconnect [ create_bd_cell -type ip -vlnv xilinx.com:ip:smartconnect:1.0 axi_hp1_interconnect ]
|
|
set_property -dict [list \
|
|
CONFIG.NUM_CLKS {2} \
|
|
CONFIG.NUM_MI {1} \
|
|
CONFIG.NUM_SI {1} \
|
|
] $axi_hp1_interconnect
|
|
|
|
|
|
# Create instance: axi_hp2_interconnect, and set properties
|
|
set axi_hp2_interconnect [ create_bd_cell -type ip -vlnv xilinx.com:ip:smartconnect:1.0 axi_hp2_interconnect ]
|
|
set_property -dict [list \
|
|
CONFIG.NUM_MI {1} \
|
|
CONFIG.NUM_SI {1} \
|
|
] $axi_hp2_interconnect
|
|
|
|
|
|
# Create instance: axi_mxfe_rx_dma, and set properties
|
|
set axi_mxfe_rx_dma [ create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 axi_mxfe_rx_dma ]
|
|
set_property -dict [list \
|
|
CONFIG.AXI_SLICE_DEST {true} \
|
|
CONFIG.AXI_SLICE_SRC {true} \
|
|
CONFIG.CYCLIC {false} \
|
|
CONFIG.DMA_2D_TRANSFER {false} \
|
|
CONFIG.DMA_DATA_WIDTH_DEST {128} \
|
|
CONFIG.DMA_DATA_WIDTH_SRC {128} \
|
|
CONFIG.DMA_LENGTH_WIDTH {24} \
|
|
CONFIG.DMA_TYPE_DEST {0} \
|
|
CONFIG.DMA_TYPE_SRC {1} \
|
|
CONFIG.ID {0} \
|
|
CONFIG.MAX_BYTES_PER_BURST {4096} \
|
|
CONFIG.SYNC_TRANSFER_START {false} \
|
|
] $axi_mxfe_rx_dma
|
|
|
|
|
|
# Create instance: axi_mxfe_rx_jesd
|
|
create_hier_cell_axi_mxfe_rx_jesd [current_bd_instance .] axi_mxfe_rx_jesd
|
|
|
|
# Create instance: axi_mxfe_rx_xcvr, and set properties
|
|
set axi_mxfe_rx_xcvr [ create_bd_cell -type ip -vlnv analog.com:user:axi_adxcvr:1.0 axi_mxfe_rx_xcvr ]
|
|
set_property -dict [list \
|
|
CONFIG.ID {0} \
|
|
CONFIG.LINK_MODE {1} \
|
|
CONFIG.LPM_OR_DFE_N {1} \
|
|
CONFIG.NUM_OF_LANES {4} \
|
|
CONFIG.QPLL_ENABLE {0} \
|
|
CONFIG.SYS_CLK_SEL {0x3} \
|
|
CONFIG.TX_OR_RX_N {0} \
|
|
] $axi_mxfe_rx_xcvr
|
|
|
|
|
|
# Create instance: axi_mxfe_tx_dma, and set properties
|
|
set axi_mxfe_tx_dma [ create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 axi_mxfe_tx_dma ]
|
|
set_property -dict [list \
|
|
CONFIG.AXI_SLICE_DEST {true} \
|
|
CONFIG.AXI_SLICE_SRC {true} \
|
|
CONFIG.CYCLIC {true} \
|
|
CONFIG.DMA_2D_TRANSFER {false} \
|
|
CONFIG.DMA_DATA_WIDTH_DEST {128} \
|
|
CONFIG.DMA_DATA_WIDTH_SRC {128} \
|
|
CONFIG.DMA_LENGTH_WIDTH {24} \
|
|
CONFIG.DMA_TYPE_DEST {1} \
|
|
CONFIG.DMA_TYPE_SRC {0} \
|
|
CONFIG.ID {0} \
|
|
CONFIG.MAX_BYTES_PER_BURST {4096} \
|
|
] $axi_mxfe_tx_dma
|
|
|
|
|
|
# Create instance: axi_mxfe_tx_jesd
|
|
create_hier_cell_axi_mxfe_tx_jesd [current_bd_instance .] axi_mxfe_tx_jesd
|
|
|
|
# Create instance: axi_mxfe_tx_xcvr, and set properties
|
|
set axi_mxfe_tx_xcvr [ create_bd_cell -type ip -vlnv analog.com:user:axi_adxcvr:1.0 axi_mxfe_tx_xcvr ]
|
|
set_property -dict [list \
|
|
CONFIG.ID {0} \
|
|
CONFIG.LINK_MODE {1} \
|
|
CONFIG.NUM_OF_LANES {4} \
|
|
CONFIG.QPLL_ENABLE {1} \
|
|
CONFIG.SYS_CLK_SEL {0x3} \
|
|
CONFIG.TX_OR_RX_N {1} \
|
|
] $axi_mxfe_tx_xcvr
|
|
|
|
|
|
# Create instance: axi_sysid_0, and set properties
|
|
set axi_sysid_0 [ create_bd_cell -type ip -vlnv analog.com:user:axi_sysid:1.0 axi_sysid_0 ]
|
|
set_property CONFIG.ROM_ADDR_BITS {9} $axi_sysid_0
|
|
|
|
|
|
# Create instance: cpack_reset_sources, and set properties
|
|
set cpack_reset_sources [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlconcat:2.1 cpack_reset_sources ]
|
|
set_property CONFIG.NUM_PORTS {3} $cpack_reset_sources
|
|
|
|
|
|
# Create instance: cpack_rst_logic, and set properties
|
|
set cpack_rst_logic [ create_bd_cell -type ip -vlnv xilinx.com:ip:util_reduced_logic:2.0 cpack_rst_logic ]
|
|
set_property -dict [list \
|
|
CONFIG.C_OPERATION {or} \
|
|
CONFIG.C_SIZE {3} \
|
|
] $cpack_rst_logic
|
|
|
|
|
|
# Create instance: manual_sync_or, and set properties
|
|
set manual_sync_or [ create_bd_cell -type ip -vlnv xilinx.com:ip:util_vector_logic:2.0 manual_sync_or ]
|
|
set_property -dict [list \
|
|
CONFIG.C_OPERATION {or} \
|
|
CONFIG.C_SIZE {1} \
|
|
] $manual_sync_or
|
|
|
|
|
|
# Create instance: mxfe_rx_data_offload
|
|
create_hier_cell_mxfe_rx_data_offload [current_bd_instance .] mxfe_rx_data_offload
|
|
|
|
# Create instance: mxfe_tx_data_offload
|
|
create_hier_cell_mxfe_tx_data_offload [current_bd_instance .] mxfe_tx_data_offload
|
|
|
|
# Create instance: pdw_generator_0, and set properties
|
|
set pdw_generator_0 [ create_bd_cell -type ip -vlnv xilinx.com:user:pdw_generator:1.0 pdw_generator_0 ]
|
|
set_property -dict [list \
|
|
CONFIG.FPGA_REVISION_DATE {0x05292024} \
|
|
CONFIG.MINOR_REV {"00000001"} \
|
|
] $pdw_generator_0
|
|
|
|
|
|
# Create instance: rom_sys_0, and set properties
|
|
set rom_sys_0 [ create_bd_cell -type ip -vlnv analog.com:user:sysid_rom:1.0 rom_sys_0 ]
|
|
set_property -dict [list \
|
|
CONFIG.PATH_TO_FILE {c:/ZCU102/hdl/projects/ad9081_fmca_ebz/zcu102/mem_init_sys.txt} \
|
|
CONFIG.ROM_ADDR_BITS {9} \
|
|
] $rom_sys_0
|
|
|
|
|
|
# Create instance: rx_device_clk_rstgen, and set properties
|
|
set rx_device_clk_rstgen [ create_bd_cell -type ip -vlnv xilinx.com:ip:proc_sys_reset:5.0 rx_device_clk_rstgen ]
|
|
|
|
# Create instance: rx_do_rstout_logic, and set properties
|
|
set rx_do_rstout_logic [ create_bd_cell -type ip -vlnv xilinx.com:ip:util_vector_logic:2.0 rx_do_rstout_logic ]
|
|
set_property -dict [list \
|
|
CONFIG.C_OPERATION {not} \
|
|
CONFIG.C_SIZE {1} \
|
|
] $rx_do_rstout_logic
|
|
|
|
|
|
# Create instance: rx_mxfe_tpl_core
|
|
create_hier_cell_rx_mxfe_tpl_core [current_bd_instance .] rx_mxfe_tpl_core
|
|
|
|
# Create instance: spi0_csn_concat, and set properties
|
|
set spi0_csn_concat [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlconcat:2.1 spi0_csn_concat ]
|
|
set_property CONFIG.NUM_PORTS {3} $spi0_csn_concat
|
|
|
|
|
|
# Create instance: spi1_csn_concat, and set properties
|
|
set spi1_csn_concat [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlconcat:2.1 spi1_csn_concat ]
|
|
set_property CONFIG.NUM_PORTS {3} $spi1_csn_concat
|
|
|
|
|
|
# Create instance: sys_250m_rstgen, and set properties
|
|
set sys_250m_rstgen [ create_bd_cell -type ip -vlnv xilinx.com:ip:proc_sys_reset:5.0 sys_250m_rstgen ]
|
|
set_property CONFIG.C_EXT_RST_WIDTH {1} $sys_250m_rstgen
|
|
|
|
|
|
# Create instance: sys_500m_rstgen, and set properties
|
|
set sys_500m_rstgen [ create_bd_cell -type ip -vlnv xilinx.com:ip:proc_sys_reset:5.0 sys_500m_rstgen ]
|
|
set_property CONFIG.C_EXT_RST_WIDTH {1} $sys_500m_rstgen
|
|
|
|
|
|
# Create instance: sys_concat_intc_0, and set properties
|
|
set sys_concat_intc_0 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlconcat:2.1 sys_concat_intc_0 ]
|
|
set_property CONFIG.NUM_PORTS {8} $sys_concat_intc_0
|
|
|
|
|
|
# Create instance: sys_concat_intc_1, and set properties
|
|
set sys_concat_intc_1 [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlconcat:2.1 sys_concat_intc_1 ]
|
|
set_property CONFIG.NUM_PORTS {8} $sys_concat_intc_1
|
|
|
|
|
|
# Create instance: sys_ps8, and set properties
|
|
set sys_ps8 [ create_bd_cell -type ip -vlnv xilinx.com:ip:zynq_ultra_ps_e:3.4 sys_ps8 ]
|
|
set_property -dict [list \
|
|
CONFIG.PSU_BANK_0_IO_STANDARD {LVCMOS18} \
|
|
CONFIG.PSU_BANK_1_IO_STANDARD {LVCMOS18} \
|
|
CONFIG.PSU_BANK_2_IO_STANDARD {LVCMOS18} \
|
|
CONFIG.PSU_BANK_3_IO_STANDARD {LVCMOS18} \
|
|
CONFIG.PSU_DDR_RAM_HIGHADDR {0xFFFFFFFF} \
|
|
CONFIG.PSU_DDR_RAM_HIGHADDR_OFFSET {0x800000000} \
|
|
CONFIG.PSU_DDR_RAM_LOWADDR_OFFSET {0x80000000} \
|
|
CONFIG.PSU_DYNAMIC_DDR_CONFIG_EN {1} \
|
|
CONFIG.PSU_MIO_13_INPUT_TYPE {cmos} \
|
|
CONFIG.PSU_MIO_13_POLARITY {Default} \
|
|
CONFIG.PSU_MIO_22_INPUT_TYPE {cmos} \
|
|
CONFIG.PSU_MIO_22_POLARITY {Default} \
|
|
CONFIG.PSU_MIO_23_POLARITY {Default} \
|
|
CONFIG.PSU_MIO_26_POLARITY {Default} \
|
|
CONFIG.PSU_MIO_38_POLARITY {Default} \
|
|
CONFIG.PSU_MIO_43_POLARITY {Default} \
|
|
CONFIG.PSU_MIO_TREE_PERIPHERALS {Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Feedback Clk#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad SPI Flash#Quad\
|
|
SPI Flash#Quad SPI Flash#GPIO0 MIO#I2C 0#I2C 0#I2C 1#I2C 1#UART 0#UART 0#UART 1#UART 1#GPIO0 MIO#GPIO0 MIO#CAN 1#CAN 1#GPIO1 MIO#DPAUX#DPAUX#DPAUX#DPAUX#PCIE#PMU GPO 0#PMU GPO 1#PMU GPO 2#PMU GPO 3#PMU\
|
|
GPO 4#PMU GPO 5#GPIO1 MIO#SD 1#SD 1#SD 1#SD 1#GPIO1 MIO#SD 1#SD 1#SD 1#SD 1#SD 1#SD 1#SD 1#SD 1#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#USB 0#Gem 3#Gem 3#Gem 3#Gem 3#Gem 3#Gem\
|
|
3#Gem 3#Gem 3#Gem 3#Gem 3#Gem 3#Gem 3#MDIO 3#MDIO 3} \
|
|
CONFIG.PSU_MIO_TREE_SIGNALS {sclk_out#miso_mo1#mo2#mo3#mosi_mi0#n_ss_out#clk_for_lpbk#n_ss_out_upper#mo_upper[0]#mo_upper[1]#mo_upper[2]#mo_upper[3]#sclk_out_upper#gpio0[13]#scl_out#sda_out#scl_out#sda_out#rxd#txd#txd#rxd#gpio0[22]#gpio0[23]#phy_tx#phy_rx#gpio1[26]#dp_aux_data_out#dp_hot_plug_detect#dp_aux_data_oe#dp_aux_data_in#reset_n#gpo[0]#gpo[1]#gpo[2]#gpo[3]#gpo[4]#gpo[5]#gpio1[38]#sdio1_data_out[4]#sdio1_data_out[5]#sdio1_data_out[6]#sdio1_data_out[7]#gpio1[43]#sdio1_wp#sdio1_cd_n#sdio1_data_out[0]#sdio1_data_out[1]#sdio1_data_out[2]#sdio1_data_out[3]#sdio1_cmd_out#sdio1_clk_out#ulpi_clk_in#ulpi_dir#ulpi_tx_data[2]#ulpi_nxt#ulpi_tx_data[0]#ulpi_tx_data[1]#ulpi_stp#ulpi_tx_data[3]#ulpi_tx_data[4]#ulpi_tx_data[5]#ulpi_tx_data[6]#ulpi_tx_data[7]#rgmii_tx_clk#rgmii_txd[0]#rgmii_txd[1]#rgmii_txd[2]#rgmii_txd[3]#rgmii_tx_ctl#rgmii_rx_clk#rgmii_rxd[0]#rgmii_rxd[1]#rgmii_rxd[2]#rgmii_rxd[3]#rgmii_rx_ctl#gem3_mdc#gem3_mdio_out}\
|
|
\
|
|
CONFIG.PSU_SD1_INTERNAL_BUS_WIDTH {8} \
|
|
CONFIG.PSU_USB3__DUAL_CLOCK_ENABLE {1} \
|
|
CONFIG.PSU__ACT_DDR_FREQ_MHZ {1050.000000} \
|
|
CONFIG.PSU__CAN1__GRP_CLK__ENABLE {0} \
|
|
CONFIG.PSU__CAN1__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__CAN1__PERIPHERAL__IO {MIO 24 .. 25} \
|
|
CONFIG.PSU__CRF_APB__ACPU_CTRL__ACT_FREQMHZ {1200.000000} \
|
|
CONFIG.PSU__CRF_APB__ACPU_CTRL__FREQMHZ {1200} \
|
|
CONFIG.PSU__CRF_APB__ACPU_CTRL__SRCSEL {APLL} \
|
|
CONFIG.PSU__CRF_APB__APLL_CTRL__SRCSEL {PSS_REF_CLK} \
|
|
CONFIG.PSU__CRF_APB__DBG_FPD_CTRL__ACT_FREQMHZ {250.000000} \
|
|
CONFIG.PSU__CRF_APB__DBG_FPD_CTRL__FREQMHZ {250} \
|
|
CONFIG.PSU__CRF_APB__DBG_FPD_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRF_APB__DBG_TRACE_CTRL__FREQMHZ {250} \
|
|
CONFIG.PSU__CRF_APB__DBG_TRACE_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRF_APB__DBG_TSTMP_CTRL__ACT_FREQMHZ {250.000000} \
|
|
CONFIG.PSU__CRF_APB__DBG_TSTMP_CTRL__FREQMHZ {250} \
|
|
CONFIG.PSU__CRF_APB__DBG_TSTMP_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRF_APB__DDR_CTRL__ACT_FREQMHZ {525.000000} \
|
|
CONFIG.PSU__CRF_APB__DDR_CTRL__FREQMHZ {1067} \
|
|
CONFIG.PSU__CRF_APB__DDR_CTRL__SRCSEL {DPLL} \
|
|
CONFIG.PSU__CRF_APB__DPDMA_REF_CTRL__ACT_FREQMHZ {600.000000} \
|
|
CONFIG.PSU__CRF_APB__DPDMA_REF_CTRL__FREQMHZ {600} \
|
|
CONFIG.PSU__CRF_APB__DPDMA_REF_CTRL__SRCSEL {APLL} \
|
|
CONFIG.PSU__CRF_APB__DPLL_CTRL__SRCSEL {PSS_REF_CLK} \
|
|
CONFIG.PSU__CRF_APB__DP_AUDIO_REF_CTRL__ACT_FREQMHZ {25.000000} \
|
|
CONFIG.PSU__CRF_APB__DP_AUDIO_REF_CTRL__SRCSEL {RPLL} \
|
|
CONFIG.PSU__CRF_APB__DP_AUDIO__FRAC_ENABLED {0} \
|
|
CONFIG.PSU__CRF_APB__DP_STC_REF_CTRL__ACT_FREQMHZ {26.666666} \
|
|
CONFIG.PSU__CRF_APB__DP_STC_REF_CTRL__SRCSEL {RPLL} \
|
|
CONFIG.PSU__CRF_APB__DP_VIDEO_REF_CTRL__ACT_FREQMHZ {300.000000} \
|
|
CONFIG.PSU__CRF_APB__DP_VIDEO_REF_CTRL__SRCSEL {VPLL} \
|
|
CONFIG.PSU__CRF_APB__DP_VIDEO__FRAC_ENABLED {0} \
|
|
CONFIG.PSU__CRF_APB__GDMA_REF_CTRL__ACT_FREQMHZ {600.000000} \
|
|
CONFIG.PSU__CRF_APB__GDMA_REF_CTRL__FREQMHZ {600} \
|
|
CONFIG.PSU__CRF_APB__GDMA_REF_CTRL__SRCSEL {APLL} \
|
|
CONFIG.PSU__CRF_APB__GPU_REF_CTRL__ACT_FREQMHZ {500.000000} \
|
|
CONFIG.PSU__CRF_APB__GPU_REF_CTRL__FREQMHZ {500} \
|
|
CONFIG.PSU__CRF_APB__GPU_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRF_APB__PCIE_REF_CTRL__ACT_FREQMHZ {250.000000} \
|
|
CONFIG.PSU__CRF_APB__PCIE_REF_CTRL__FREQMHZ {250} \
|
|
CONFIG.PSU__CRF_APB__PCIE_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRF_APB__SATA_REF_CTRL__ACT_FREQMHZ {250.000000} \
|
|
CONFIG.PSU__CRF_APB__SATA_REF_CTRL__FREQMHZ {250} \
|
|
CONFIG.PSU__CRF_APB__SATA_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRF_APB__TOPSW_LSBUS_CTRL__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__CRF_APB__TOPSW_LSBUS_CTRL__FREQMHZ {100} \
|
|
CONFIG.PSU__CRF_APB__TOPSW_LSBUS_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRF_APB__TOPSW_MAIN_CTRL__ACT_FREQMHZ {525.000000} \
|
|
CONFIG.PSU__CRF_APB__TOPSW_MAIN_CTRL__FREQMHZ {533.33} \
|
|
CONFIG.PSU__CRF_APB__TOPSW_MAIN_CTRL__SRCSEL {DPLL} \
|
|
CONFIG.PSU__CRF_APB__VPLL_CTRL__SRCSEL {PSS_REF_CLK} \
|
|
CONFIG.PSU__CRL_APB__ADMA_REF_CTRL__ACT_FREQMHZ {500.000000} \
|
|
CONFIG.PSU__CRL_APB__ADMA_REF_CTRL__FREQMHZ {500} \
|
|
CONFIG.PSU__CRL_APB__ADMA_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__AMS_REF_CTRL__ACT_FREQMHZ {50.000000} \
|
|
CONFIG.PSU__CRL_APB__CAN1_REF_CTRL__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__CRL_APB__CAN1_REF_CTRL__FREQMHZ {100} \
|
|
CONFIG.PSU__CRL_APB__CAN1_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__CPU_R5_CTRL__ACT_FREQMHZ {500.000000} \
|
|
CONFIG.PSU__CRL_APB__CPU_R5_CTRL__FREQMHZ {500} \
|
|
CONFIG.PSU__CRL_APB__CPU_R5_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__DBG_LPD_CTRL__ACT_FREQMHZ {250.000000} \
|
|
CONFIG.PSU__CRL_APB__DBG_LPD_CTRL__FREQMHZ {250} \
|
|
CONFIG.PSU__CRL_APB__DBG_LPD_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__DLL_REF_CTRL__ACT_FREQMHZ {1500.000000} \
|
|
CONFIG.PSU__CRL_APB__GEM3_REF_CTRL__ACT_FREQMHZ {125.000000} \
|
|
CONFIG.PSU__CRL_APB__GEM3_REF_CTRL__FREQMHZ {125} \
|
|
CONFIG.PSU__CRL_APB__GEM3_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__GEM_TSU_REF_CTRL__ACT_FREQMHZ {250.000000} \
|
|
CONFIG.PSU__CRL_APB__GEM_TSU_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__I2C0_REF_CTRL__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__CRL_APB__I2C0_REF_CTRL__FREQMHZ {100} \
|
|
CONFIG.PSU__CRL_APB__I2C0_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__I2C1_REF_CTRL__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__CRL_APB__I2C1_REF_CTRL__FREQMHZ {100} \
|
|
CONFIG.PSU__CRL_APB__I2C1_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__IOPLL_CTRL__SRCSEL {PSS_REF_CLK} \
|
|
CONFIG.PSU__CRL_APB__IOU_SWITCH_CTRL__ACT_FREQMHZ {250.000000} \
|
|
CONFIG.PSU__CRL_APB__IOU_SWITCH_CTRL__FREQMHZ {250} \
|
|
CONFIG.PSU__CRL_APB__IOU_SWITCH_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__LPD_LSBUS_CTRL__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__CRL_APB__LPD_LSBUS_CTRL__FREQMHZ {100} \
|
|
CONFIG.PSU__CRL_APB__LPD_LSBUS_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__LPD_SWITCH_CTRL__ACT_FREQMHZ {500.000000} \
|
|
CONFIG.PSU__CRL_APB__LPD_SWITCH_CTRL__FREQMHZ {500} \
|
|
CONFIG.PSU__CRL_APB__LPD_SWITCH_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__PCAP_CTRL__ACT_FREQMHZ {187.500000} \
|
|
CONFIG.PSU__CRL_APB__PCAP_CTRL__FREQMHZ {200} \
|
|
CONFIG.PSU__CRL_APB__PCAP_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__PL0_REF_CTRL__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__CRL_APB__PL0_REF_CTRL__FREQMHZ {100} \
|
|
CONFIG.PSU__CRL_APB__PL0_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__PL1_REF_CTRL__ACT_FREQMHZ {250.000000} \
|
|
CONFIG.PSU__CRL_APB__PL1_REF_CTRL__FREQMHZ {250} \
|
|
CONFIG.PSU__CRL_APB__PL1_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__PL2_REF_CTRL__ACT_FREQMHZ {500.000000} \
|
|
CONFIG.PSU__CRL_APB__PL2_REF_CTRL__FREQMHZ {500} \
|
|
CONFIG.PSU__CRL_APB__PL2_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__QSPI_REF_CTRL__ACT_FREQMHZ {125.000000} \
|
|
CONFIG.PSU__CRL_APB__QSPI_REF_CTRL__FREQMHZ {125} \
|
|
CONFIG.PSU__CRL_APB__QSPI_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__RPLL_CTRL__SRCSEL {PSS_REF_CLK} \
|
|
CONFIG.PSU__CRL_APB__SDIO1_REF_CTRL__ACT_FREQMHZ {187.500000} \
|
|
CONFIG.PSU__CRL_APB__SDIO1_REF_CTRL__FREQMHZ {200} \
|
|
CONFIG.PSU__CRL_APB__SDIO1_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__SPI0_REF_CTRL__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__CRL_APB__SPI0_REF_CTRL__FREQMHZ {100} \
|
|
CONFIG.PSU__CRL_APB__SPI1_REF_CTRL__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__CRL_APB__SPI1_REF_CTRL__FREQMHZ {100} \
|
|
CONFIG.PSU__CRL_APB__TIMESTAMP_REF_CTRL__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__CRL_APB__TIMESTAMP_REF_CTRL__FREQMHZ {100} \
|
|
CONFIG.PSU__CRL_APB__TIMESTAMP_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__UART0_REF_CTRL__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__CRL_APB__UART0_REF_CTRL__FREQMHZ {100} \
|
|
CONFIG.PSU__CRL_APB__UART0_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__UART1_REF_CTRL__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__CRL_APB__UART1_REF_CTRL__FREQMHZ {100} \
|
|
CONFIG.PSU__CRL_APB__UART1_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__USB0_BUS_REF_CTRL__ACT_FREQMHZ {250.000000} \
|
|
CONFIG.PSU__CRL_APB__USB0_BUS_REF_CTRL__FREQMHZ {250} \
|
|
CONFIG.PSU__CRL_APB__USB0_BUS_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__USB3_DUAL_REF_CTRL__ACT_FREQMHZ {20.000000} \
|
|
CONFIG.PSU__CRL_APB__USB3_DUAL_REF_CTRL__FREQMHZ {20} \
|
|
CONFIG.PSU__CRL_APB__USB3_DUAL_REF_CTRL__SRCSEL {IOPLL} \
|
|
CONFIG.PSU__CRL_APB__USB3__ENABLE {1} \
|
|
CONFIG.PSU__CSUPMU__PERIPHERAL__VALID {1} \
|
|
CONFIG.PSU__DDRC__BG_ADDR_COUNT {2} \
|
|
CONFIG.PSU__DDRC__BRC_MAPPING {ROW_BANK_COL} \
|
|
CONFIG.PSU__DDRC__BUS_WIDTH {64 Bit} \
|
|
CONFIG.PSU__DDRC__CL {15} \
|
|
CONFIG.PSU__DDRC__CLOCK_STOP_EN {0} \
|
|
CONFIG.PSU__DDRC__COMPONENTS {UDIMM} \
|
|
CONFIG.PSU__DDRC__CWL {14} \
|
|
CONFIG.PSU__DDRC__DDR4_ADDR_MAPPING {0} \
|
|
CONFIG.PSU__DDRC__DDR4_CAL_MODE_ENABLE {0} \
|
|
CONFIG.PSU__DDRC__DDR4_CRC_CONTROL {0} \
|
|
CONFIG.PSU__DDRC__DDR4_T_REF_MODE {0} \
|
|
CONFIG.PSU__DDRC__DDR4_T_REF_RANGE {Normal (0-85)} \
|
|
CONFIG.PSU__DDRC__DEVICE_CAPACITY {4096 MBits} \
|
|
CONFIG.PSU__DDRC__DM_DBI {DM_NO_DBI} \
|
|
CONFIG.PSU__DDRC__DRAM_WIDTH {8 Bits} \
|
|
CONFIG.PSU__DDRC__ECC {Disabled} \
|
|
CONFIG.PSU__DDRC__FGRM {1X} \
|
|
CONFIG.PSU__DDRC__LP_ASR {manual normal} \
|
|
CONFIG.PSU__DDRC__MEMORY_TYPE {DDR 4} \
|
|
CONFIG.PSU__DDRC__PARITY_ENABLE {0} \
|
|
CONFIG.PSU__DDRC__PER_BANK_REFRESH {0} \
|
|
CONFIG.PSU__DDRC__PHY_DBI_MODE {0} \
|
|
CONFIG.PSU__DDRC__RANK_ADDR_COUNT {0} \
|
|
CONFIG.PSU__DDRC__ROW_ADDR_COUNT {15} \
|
|
CONFIG.PSU__DDRC__SELF_REF_ABORT {0} \
|
|
CONFIG.PSU__DDRC__SPEED_BIN {DDR4_2133P} \
|
|
CONFIG.PSU__DDRC__STATIC_RD_MODE {0} \
|
|
CONFIG.PSU__DDRC__TRAIN_DATA_EYE {1} \
|
|
CONFIG.PSU__DDRC__TRAIN_READ_GATE {1} \
|
|
CONFIG.PSU__DDRC__TRAIN_WRITE_LEVEL {1} \
|
|
CONFIG.PSU__DDRC__T_FAW {30.0} \
|
|
CONFIG.PSU__DDRC__T_RAS_MIN {33} \
|
|
CONFIG.PSU__DDRC__T_RC {47.06} \
|
|
CONFIG.PSU__DDRC__T_RCD {15} \
|
|
CONFIG.PSU__DDRC__T_RP {15} \
|
|
CONFIG.PSU__DDRC__VREF {1} \
|
|
CONFIG.PSU__DDR_HIGH_ADDRESS_GUI_ENABLE {1} \
|
|
CONFIG.PSU__DDR__INTERFACE__FREQMHZ {533.500} \
|
|
CONFIG.PSU__DISPLAYPORT__LANE0__ENABLE {1} \
|
|
CONFIG.PSU__DISPLAYPORT__LANE0__IO {GT Lane1} \
|
|
CONFIG.PSU__DISPLAYPORT__LANE1__ENABLE {0} \
|
|
CONFIG.PSU__DISPLAYPORT__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__DLL__ISUSED {1} \
|
|
CONFIG.PSU__DPAUX__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__DPAUX__PERIPHERAL__IO {MIO 27 .. 30} \
|
|
CONFIG.PSU__DP__LANE_SEL {Single Lower} \
|
|
CONFIG.PSU__DP__REF_CLK_FREQ {27} \
|
|
CONFIG.PSU__DP__REF_CLK_SEL {Ref Clk3} \
|
|
CONFIG.PSU__ENET3__FIFO__ENABLE {0} \
|
|
CONFIG.PSU__ENET3__GRP_MDIO__ENABLE {1} \
|
|
CONFIG.PSU__ENET3__GRP_MDIO__IO {MIO 76 .. 77} \
|
|
CONFIG.PSU__ENET3__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__ENET3__PERIPHERAL__IO {MIO 64 .. 75} \
|
|
CONFIG.PSU__ENET3__PTP__ENABLE {0} \
|
|
CONFIG.PSU__ENET3__TSU__ENABLE {0} \
|
|
CONFIG.PSU__FPDMASTERS_COHERENCY {0} \
|
|
CONFIG.PSU__FPD_SLCR__WDT1__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__FPGA_PL0_ENABLE {1} \
|
|
CONFIG.PSU__FPGA_PL1_ENABLE {1} \
|
|
CONFIG.PSU__FPGA_PL2_ENABLE {1} \
|
|
CONFIG.PSU__GEM3_COHERENCY {0} \
|
|
CONFIG.PSU__GEM3_ROUTE_THROUGH_FPD {0} \
|
|
CONFIG.PSU__GEM__TSU__ENABLE {0} \
|
|
CONFIG.PSU__GPIO0_MIO__IO {MIO 0 .. 25} \
|
|
CONFIG.PSU__GPIO0_MIO__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__GPIO1_MIO__IO {MIO 26 .. 51} \
|
|
CONFIG.PSU__GPIO1_MIO__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__GPIO_EMIO_WIDTH {95} \
|
|
CONFIG.PSU__GPIO_EMIO__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__GPIO_EMIO__PERIPHERAL__IO {95} \
|
|
CONFIG.PSU__GT__LINK_SPEED {HBR} \
|
|
CONFIG.PSU__GT__PRE_EMPH_LVL_4 {0} \
|
|
CONFIG.PSU__GT__VLT_SWNG_LVL_4 {0} \
|
|
CONFIG.PSU__I2C0__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__I2C0__PERIPHERAL__IO {MIO 14 .. 15} \
|
|
CONFIG.PSU__I2C1__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__I2C1__PERIPHERAL__IO {MIO 16 .. 17} \
|
|
CONFIG.PSU__IOU_SLCR__IOU_TTC_APB_CLK__TTC0_SEL {APB} \
|
|
CONFIG.PSU__IOU_SLCR__IOU_TTC_APB_CLK__TTC1_SEL {APB} \
|
|
CONFIG.PSU__IOU_SLCR__IOU_TTC_APB_CLK__TTC2_SEL {APB} \
|
|
CONFIG.PSU__IOU_SLCR__IOU_TTC_APB_CLK__TTC3_SEL {APB} \
|
|
CONFIG.PSU__IOU_SLCR__TTC0__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__IOU_SLCR__TTC1__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__IOU_SLCR__TTC2__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__IOU_SLCR__TTC3__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__IOU_SLCR__WDT0__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__LPD_SLCR__CSUPMU__ACT_FREQMHZ {100.000000} \
|
|
CONFIG.PSU__MAXIGP2__DATA_WIDTH {32} \
|
|
CONFIG.PSU__OVERRIDE__BASIC_CLOCK {0} \
|
|
CONFIG.PSU__PCIE__BAR0_ENABLE {0} \
|
|
CONFIG.PSU__PCIE__BAR0_VAL {0x0} \
|
|
CONFIG.PSU__PCIE__BAR1_ENABLE {0} \
|
|
CONFIG.PSU__PCIE__BAR1_VAL {0x0} \
|
|
CONFIG.PSU__PCIE__BAR2_VAL {0x0} \
|
|
CONFIG.PSU__PCIE__BAR3_VAL {0x0} \
|
|
CONFIG.PSU__PCIE__BAR4_VAL {0x0} \
|
|
CONFIG.PSU__PCIE__BAR5_VAL {0x0} \
|
|
CONFIG.PSU__PCIE__CLASS_CODE_BASE {0x06} \
|
|
CONFIG.PSU__PCIE__CLASS_CODE_INTERFACE {0x0} \
|
|
CONFIG.PSU__PCIE__CLASS_CODE_SUB {0x4} \
|
|
CONFIG.PSU__PCIE__CLASS_CODE_VALUE {0x60400} \
|
|
CONFIG.PSU__PCIE__CRS_SW_VISIBILITY {1} \
|
|
CONFIG.PSU__PCIE__DEVICE_ID {0xD021} \
|
|
CONFIG.PSU__PCIE__DEVICE_PORT_TYPE {Root Port} \
|
|
CONFIG.PSU__PCIE__EROM_ENABLE {0} \
|
|
CONFIG.PSU__PCIE__EROM_VAL {0x0} \
|
|
CONFIG.PSU__PCIE__LANE0__ENABLE {1} \
|
|
CONFIG.PSU__PCIE__LANE0__IO {GT Lane0} \
|
|
CONFIG.PSU__PCIE__LANE1__ENABLE {0} \
|
|
CONFIG.PSU__PCIE__LANE2__ENABLE {0} \
|
|
CONFIG.PSU__PCIE__LANE3__ENABLE {0} \
|
|
CONFIG.PSU__PCIE__LINK_SPEED {5.0 Gb/s} \
|
|
CONFIG.PSU__PCIE__MAXIMUM_LINK_WIDTH {x1} \
|
|
CONFIG.PSU__PCIE__MAX_PAYLOAD_SIZE {256 bytes} \
|
|
CONFIG.PSU__PCIE__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__PCIE__PERIPHERAL__ENDPOINT_ENABLE {0} \
|
|
CONFIG.PSU__PCIE__PERIPHERAL__ROOTPORT_ENABLE {1} \
|
|
CONFIG.PSU__PCIE__PERIPHERAL__ROOTPORT_IO {MIO 31} \
|
|
CONFIG.PSU__PCIE__REF_CLK_FREQ {100} \
|
|
CONFIG.PSU__PCIE__REF_CLK_SEL {Ref Clk0} \
|
|
CONFIG.PSU__PCIE__RESET__POLARITY {Active Low} \
|
|
CONFIG.PSU__PCIE__REVISION_ID {0x0} \
|
|
CONFIG.PSU__PCIE__SUBSYSTEM_ID {0x7} \
|
|
CONFIG.PSU__PCIE__SUBSYSTEM_VENDOR_ID {0x10EE} \
|
|
CONFIG.PSU__PCIE__VENDOR_ID {0x10EE} \
|
|
CONFIG.PSU__PL_CLK0_BUF {TRUE} \
|
|
CONFIG.PSU__PL_CLK1_BUF {TRUE} \
|
|
CONFIG.PSU__PL_CLK2_BUF {TRUE} \
|
|
CONFIG.PSU__PMU_COHERENCY {0} \
|
|
CONFIG.PSU__PMU__AIBACK__ENABLE {0} \
|
|
CONFIG.PSU__PMU__EMIO_GPI__ENABLE {0} \
|
|
CONFIG.PSU__PMU__EMIO_GPO__ENABLE {0} \
|
|
CONFIG.PSU__PMU__GPI0__ENABLE {0} \
|
|
CONFIG.PSU__PMU__GPI1__ENABLE {0} \
|
|
CONFIG.PSU__PMU__GPI2__ENABLE {0} \
|
|
CONFIG.PSU__PMU__GPI3__ENABLE {0} \
|
|
CONFIG.PSU__PMU__GPI4__ENABLE {0} \
|
|
CONFIG.PSU__PMU__GPI5__ENABLE {0} \
|
|
CONFIG.PSU__PMU__GPO0__ENABLE {1} \
|
|
CONFIG.PSU__PMU__GPO0__IO {MIO 32} \
|
|
CONFIG.PSU__PMU__GPO1__ENABLE {1} \
|
|
CONFIG.PSU__PMU__GPO1__IO {MIO 33} \
|
|
CONFIG.PSU__PMU__GPO2__ENABLE {1} \
|
|
CONFIG.PSU__PMU__GPO2__IO {MIO 34} \
|
|
CONFIG.PSU__PMU__GPO2__POLARITY {high} \
|
|
CONFIG.PSU__PMU__GPO3__ENABLE {1} \
|
|
CONFIG.PSU__PMU__GPO3__IO {MIO 35} \
|
|
CONFIG.PSU__PMU__GPO3__POLARITY {low} \
|
|
CONFIG.PSU__PMU__GPO4__ENABLE {1} \
|
|
CONFIG.PSU__PMU__GPO4__IO {MIO 36} \
|
|
CONFIG.PSU__PMU__GPO4__POLARITY {low} \
|
|
CONFIG.PSU__PMU__GPO5__ENABLE {1} \
|
|
CONFIG.PSU__PMU__GPO5__IO {MIO 37} \
|
|
CONFIG.PSU__PMU__GPO5__POLARITY {low} \
|
|
CONFIG.PSU__PMU__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__PMU__PLERROR__ENABLE {0} \
|
|
CONFIG.PSU__PRESET_APPLIED {1} \
|
|
CONFIG.PSU__PROTECTION__MASTERS {USB1:NonSecure;0|USB0:NonSecure;1|S_AXI_LPD:NA;0|S_AXI_HPC1_FPD:NA;0|S_AXI_HPC0_FPD:NA;0|S_AXI_HP3_FPD:NA;0|S_AXI_HP2_FPD:NA;1|S_AXI_HP1_FPD:NA;1|S_AXI_HP0_FPD:NA;1|S_AXI_ACP:NA;0|S_AXI_ACE:NA;0|SD1:NonSecure;1|SD0:NonSecure;0|SATA1:NonSecure;1|SATA0:NonSecure;1|RPU1:Secure;1|RPU0:Secure;1|QSPI:NonSecure;1|PMU:NA;1|PCIe:NonSecure;1|NAND:NonSecure;0|LDMA:NonSecure;1|GPU:NonSecure;1|GEM3:NonSecure;1|GEM2:NonSecure;0|GEM1:NonSecure;0|GEM0:NonSecure;0|FDMA:NonSecure;1|DP:NonSecure;1|DAP:NA;1|Coresight:NA;1|CSU:NA;1|APU:NA;1}\
|
|
\
|
|
CONFIG.PSU__PROTECTION__SLAVES {LPD;USB3_1_XHCI;FE300000;FE3FFFFF;0|LPD;USB3_1;FF9E0000;FF9EFFFF;0|LPD;USB3_0_XHCI;FE200000;FE2FFFFF;1|LPD;USB3_0;FF9D0000;FF9DFFFF;1|LPD;UART1;FF010000;FF01FFFF;1|LPD;UART0;FF000000;FF00FFFF;1|LPD;TTC3;FF140000;FF14FFFF;1|LPD;TTC2;FF130000;FF13FFFF;1|LPD;TTC1;FF120000;FF12FFFF;1|LPD;TTC0;FF110000;FF11FFFF;1|FPD;SWDT1;FD4D0000;FD4DFFFF;1|LPD;SWDT0;FF150000;FF15FFFF;1|LPD;SPI1;FF050000;FF05FFFF;1|LPD;SPI0;FF040000;FF04FFFF;1|FPD;SMMU_REG;FD5F0000;FD5FFFFF;1|FPD;SMMU;FD800000;FDFFFFFF;1|FPD;SIOU;FD3D0000;FD3DFFFF;1|FPD;SERDES;FD400000;FD47FFFF;1|LPD;SD1;FF170000;FF17FFFF;1|LPD;SD0;FF160000;FF16FFFF;0|FPD;SATA;FD0C0000;FD0CFFFF;1|LPD;RTC;FFA60000;FFA6FFFF;1|LPD;RSA_CORE;FFCE0000;FFCEFFFF;1|LPD;RPU;FF9A0000;FF9AFFFF;1|LPD;R5_TCM_RAM_GLOBAL;FFE00000;FFE3FFFF;1|LPD;R5_1_Instruction_Cache;FFEC0000;FFECFFFF;1|LPD;R5_1_Data_Cache;FFED0000;FFEDFFFF;1|LPD;R5_1_BTCM_GLOBAL;FFEB0000;FFEBFFFF;1|LPD;R5_1_ATCM_GLOBAL;FFE90000;FFE9FFFF;1|LPD;R5_0_Instruction_Cache;FFE40000;FFE4FFFF;1|LPD;R5_0_Data_Cache;FFE50000;FFE5FFFF;1|LPD;R5_0_BTCM_GLOBAL;FFE20000;FFE2FFFF;1|LPD;R5_0_ATCM_GLOBAL;FFE00000;FFE0FFFF;1|LPD;QSPI_Linear_Address;C0000000;DFFFFFFF;1|LPD;QSPI;FF0F0000;FF0FFFFF;1|LPD;PMU_RAM;FFDC0000;FFDDFFFF;1|LPD;PMU_GLOBAL;FFD80000;FFDBFFFF;1|FPD;PCIE_MAIN;FD0E0000;FD0EFFFF;1|FPD;PCIE_LOW;E0000000;EFFFFFFF;1|FPD;PCIE_HIGH2;8000000000;BFFFFFFFFF;1|FPD;PCIE_HIGH1;600000000;7FFFFFFFF;1|FPD;PCIE_DMA;FD0F0000;FD0FFFFF;1|FPD;PCIE_ATTRIB;FD480000;FD48FFFF;1|LPD;OCM_XMPU_CFG;FFA70000;FFA7FFFF;1|LPD;OCM_SLCR;FF960000;FF96FFFF;1|OCM;OCM;FFFC0000;FFFFFFFF;1|LPD;NAND;FF100000;FF10FFFF;0|LPD;MBISTJTAG;FFCF0000;FFCFFFFF;1|LPD;LPD_XPPU_SINK;FF9C0000;FF9CFFFF;1|LPD;LPD_XPPU;FF980000;FF98FFFF;1|LPD;LPD_SLCR_SECURE;FF4B0000;FF4DFFFF;1|LPD;LPD_SLCR;FF410000;FF4AFFFF;1|LPD;LPD_GPV;FE100000;FE1FFFFF;1|LPD;LPD_DMA_7;FFAF0000;FFAFFFFF;1|LPD;LPD_DMA_6;FFAE0000;FFAEFFFF;1|LPD;LPD_DMA_5;FFAD0000;FFADFFFF;1|LPD;LPD_DMA_4;FFAC0000;FFACFFFF;1|LPD;LPD_DMA_3;FFAB0000;FFABFFFF;1|LPD;LPD_DMA_2;FFAA0000;FFAAFFFF;1|LPD;LPD_DMA_1;FFA90000;FFA9FFFF;1|LPD;LPD_DMA_0;FFA80000;FFA8FFFF;1|LPD;IPI_CTRL;FF380000;FF3FFFFF;1|LPD;IOU_SLCR;FF180000;FF23FFFF;1|LPD;IOU_SECURE_SLCR;FF240000;FF24FFFF;1|LPD;IOU_SCNTRS;FF260000;FF26FFFF;1|LPD;IOU_SCNTR;FF250000;FF25FFFF;1|LPD;IOU_GPV;FE000000;FE0FFFFF;1|LPD;I2C1;FF030000;FF03FFFF;1|LPD;I2C0;FF020000;FF02FFFF;1|FPD;GPU;FD4B0000;FD4BFFFF;1|LPD;GPIO;FF0A0000;FF0AFFFF;1|LPD;GEM3;FF0E0000;FF0EFFFF;1|LPD;GEM2;FF0D0000;FF0DFFFF;0|LPD;GEM1;FF0C0000;FF0CFFFF;0|LPD;GEM0;FF0B0000;FF0BFFFF;0|FPD;FPD_XMPU_SINK;FD4F0000;FD4FFFFF;1|FPD;FPD_XMPU_CFG;FD5D0000;FD5DFFFF;1|FPD;FPD_SLCR_SECURE;FD690000;FD6CFFFF;1|FPD;FPD_SLCR;FD610000;FD68FFFF;1|FPD;FPD_DMA_CH7;FD570000;FD57FFFF;1|FPD;FPD_DMA_CH6;FD560000;FD56FFFF;1|FPD;FPD_DMA_CH5;FD550000;FD55FFFF;1|FPD;FPD_DMA_CH4;FD540000;FD54FFFF;1|FPD;FPD_DMA_CH3;FD530000;FD53FFFF;1|FPD;FPD_DMA_CH2;FD520000;FD52FFFF;1|FPD;FPD_DMA_CH1;FD510000;FD51FFFF;1|FPD;FPD_DMA_CH0;FD500000;FD50FFFF;1|LPD;EFUSE;FFCC0000;FFCCFFFF;1|FPD;Display\
|
|
Port;FD4A0000;FD4AFFFF;1|FPD;DPDMA;FD4C0000;FD4CFFFF;1|FPD;DDR_XMPU5_CFG;FD050000;FD05FFFF;1|FPD;DDR_XMPU4_CFG;FD040000;FD04FFFF;1|FPD;DDR_XMPU3_CFG;FD030000;FD03FFFF;1|FPD;DDR_XMPU2_CFG;FD020000;FD02FFFF;1|FPD;DDR_XMPU1_CFG;FD010000;FD01FFFF;1|FPD;DDR_XMPU0_CFG;FD000000;FD00FFFF;1|FPD;DDR_QOS_CTRL;FD090000;FD09FFFF;1|FPD;DDR_PHY;FD080000;FD08FFFF;1|DDR;DDR_LOW;0;7FFFFFFF;1|DDR;DDR_HIGH;800000000;87FFFFFFF;1|FPD;DDDR_CTRL;FD070000;FD070FFF;1|LPD;Coresight;FE800000;FEFFFFFF;1|LPD;CSU_DMA;FFC80000;FFC9FFFF;1|LPD;CSU;FFCA0000;FFCAFFFF;1|LPD;CRL_APB;FF5E0000;FF85FFFF;1|FPD;CRF_APB;FD1A0000;FD2DFFFF;1|FPD;CCI_REG;FD5E0000;FD5EFFFF;1|LPD;CAN1;FF070000;FF07FFFF;1|LPD;CAN0;FF060000;FF06FFFF;0|FPD;APU;FD5C0000;FD5CFFFF;1|LPD;APM_INTC_IOU;FFA20000;FFA2FFFF;1|LPD;APM_FPD_LPD;FFA30000;FFA3FFFF;1|FPD;APM_5;FD490000;FD49FFFF;1|FPD;APM_0;FD0B0000;FD0BFFFF;1|LPD;APM2;FFA10000;FFA1FFFF;1|LPD;APM1;FFA00000;FFA0FFFF;1|LPD;AMS;FFA50000;FFA5FFFF;1|FPD;AFI_5;FD3B0000;FD3BFFFF;1|FPD;AFI_4;FD3A0000;FD3AFFFF;1|FPD;AFI_3;FD390000;FD39FFFF;1|FPD;AFI_2;FD380000;FD38FFFF;1|FPD;AFI_1;FD370000;FD37FFFF;1|FPD;AFI_0;FD360000;FD36FFFF;1|LPD;AFIFM6;FF9B0000;FF9BFFFF;1|FPD;ACPU_GIC;F9010000;F907FFFF;1}\
|
|
\
|
|
CONFIG.PSU__PSS_REF_CLK__FREQMHZ {33.333333333} \
|
|
CONFIG.PSU__QSPI_COHERENCY {0} \
|
|
CONFIG.PSU__QSPI_ROUTE_THROUGH_FPD {0} \
|
|
CONFIG.PSU__QSPI__GRP_FBCLK__ENABLE {1} \
|
|
CONFIG.PSU__QSPI__GRP_FBCLK__IO {MIO 6} \
|
|
CONFIG.PSU__QSPI__PERIPHERAL__DATA_MODE {x4} \
|
|
CONFIG.PSU__QSPI__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__QSPI__PERIPHERAL__IO {MIO 0 .. 12} \
|
|
CONFIG.PSU__QSPI__PERIPHERAL__MODE {Dual Parallel} \
|
|
CONFIG.PSU__SATA__LANE0__ENABLE {0} \
|
|
CONFIG.PSU__SATA__LANE1__IO {GT Lane3} \
|
|
CONFIG.PSU__SATA__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__SATA__REF_CLK_FREQ {125} \
|
|
CONFIG.PSU__SATA__REF_CLK_SEL {Ref Clk1} \
|
|
CONFIG.PSU__SAXIGP2__DATA_WIDTH {128} \
|
|
CONFIG.PSU__SAXIGP3__DATA_WIDTH {128} \
|
|
CONFIG.PSU__SAXIGP4__DATA_WIDTH {128} \
|
|
CONFIG.PSU__SD1_COHERENCY {0} \
|
|
CONFIG.PSU__SD1_ROUTE_THROUGH_FPD {0} \
|
|
CONFIG.PSU__SD1__CLK_100_SDR_OTAP_DLY {0x3} \
|
|
CONFIG.PSU__SD1__CLK_200_SDR_OTAP_DLY {0x3} \
|
|
CONFIG.PSU__SD1__CLK_50_DDR_ITAP_DLY {0x3D} \
|
|
CONFIG.PSU__SD1__CLK_50_DDR_OTAP_DLY {0x4} \
|
|
CONFIG.PSU__SD1__CLK_50_SDR_ITAP_DLY {0x15} \
|
|
CONFIG.PSU__SD1__CLK_50_SDR_OTAP_DLY {0x5} \
|
|
CONFIG.PSU__SD1__DATA_TRANSFER_MODE {8Bit} \
|
|
CONFIG.PSU__SD1__GRP_CD__ENABLE {1} \
|
|
CONFIG.PSU__SD1__GRP_CD__IO {MIO 45} \
|
|
CONFIG.PSU__SD1__GRP_POW__ENABLE {0} \
|
|
CONFIG.PSU__SD1__GRP_WP__ENABLE {1} \
|
|
CONFIG.PSU__SD1__GRP_WP__IO {MIO 44} \
|
|
CONFIG.PSU__SD1__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__SD1__PERIPHERAL__IO {MIO 39 .. 51} \
|
|
CONFIG.PSU__SD1__SLOT_TYPE {SD 3.0} \
|
|
CONFIG.PSU__SPI0__GRP_SS0__IO {EMIO} \
|
|
CONFIG.PSU__SPI0__GRP_SS1__ENABLE {1} \
|
|
CONFIG.PSU__SPI0__GRP_SS1__IO {EMIO} \
|
|
CONFIG.PSU__SPI0__GRP_SS2__ENABLE {1} \
|
|
CONFIG.PSU__SPI0__GRP_SS2__IO {EMIO} \
|
|
CONFIG.PSU__SPI0__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__SPI0__PERIPHERAL__IO {EMIO} \
|
|
CONFIG.PSU__SPI1__GRP_SS0__IO {EMIO} \
|
|
CONFIG.PSU__SPI1__GRP_SS1__ENABLE {1} \
|
|
CONFIG.PSU__SPI1__GRP_SS1__IO {EMIO} \
|
|
CONFIG.PSU__SPI1__GRP_SS2__ENABLE {1} \
|
|
CONFIG.PSU__SPI1__GRP_SS2__IO {EMIO} \
|
|
CONFIG.PSU__SPI1__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__SPI1__PERIPHERAL__IO {EMIO} \
|
|
CONFIG.PSU__SWDT0__CLOCK__ENABLE {0} \
|
|
CONFIG.PSU__SWDT0__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__SWDT0__RESET__ENABLE {0} \
|
|
CONFIG.PSU__SWDT1__CLOCK__ENABLE {0} \
|
|
CONFIG.PSU__SWDT1__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__SWDT1__RESET__ENABLE {0} \
|
|
CONFIG.PSU__TSU__BUFG_PORT_PAIR {0} \
|
|
CONFIG.PSU__TTC0__CLOCK__ENABLE {0} \
|
|
CONFIG.PSU__TTC0__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__TTC0__WAVEOUT__ENABLE {0} \
|
|
CONFIG.PSU__TTC1__CLOCK__ENABLE {0} \
|
|
CONFIG.PSU__TTC1__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__TTC1__WAVEOUT__ENABLE {0} \
|
|
CONFIG.PSU__TTC2__CLOCK__ENABLE {0} \
|
|
CONFIG.PSU__TTC2__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__TTC2__WAVEOUT__ENABLE {0} \
|
|
CONFIG.PSU__TTC3__CLOCK__ENABLE {0} \
|
|
CONFIG.PSU__TTC3__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__TTC3__WAVEOUT__ENABLE {0} \
|
|
CONFIG.PSU__UART0__BAUD_RATE {115200} \
|
|
CONFIG.PSU__UART0__MODEM__ENABLE {0} \
|
|
CONFIG.PSU__UART0__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__UART0__PERIPHERAL__IO {MIO 18 .. 19} \
|
|
CONFIG.PSU__UART1__BAUD_RATE {115200} \
|
|
CONFIG.PSU__UART1__MODEM__ENABLE {0} \
|
|
CONFIG.PSU__UART1__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__UART1__PERIPHERAL__IO {MIO 20 .. 21} \
|
|
CONFIG.PSU__USB0_COHERENCY {0} \
|
|
CONFIG.PSU__USB0__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__USB0__PERIPHERAL__IO {MIO 52 .. 63} \
|
|
CONFIG.PSU__USB0__REF_CLK_FREQ {26} \
|
|
CONFIG.PSU__USB0__REF_CLK_SEL {Ref Clk2} \
|
|
CONFIG.PSU__USB2_0__EMIO__ENABLE {0} \
|
|
CONFIG.PSU__USB3_0__EMIO__ENABLE {0} \
|
|
CONFIG.PSU__USB3_0__PERIPHERAL__ENABLE {1} \
|
|
CONFIG.PSU__USB3_0__PERIPHERAL__IO {GT Lane2} \
|
|
CONFIG.PSU__USB__RESET__MODE {Boot Pin} \
|
|
CONFIG.PSU__USB__RESET__POLARITY {Active Low} \
|
|
CONFIG.PSU__USE__IRQ0 {1} \
|
|
CONFIG.PSU__USE__IRQ1 {1} \
|
|
CONFIG.PSU__USE__M_AXI_GP0 {0} \
|
|
CONFIG.PSU__USE__M_AXI_GP1 {0} \
|
|
CONFIG.PSU__USE__M_AXI_GP2 {1} \
|
|
CONFIG.PSU__USE__S_AXI_GP2 {1} \
|
|
CONFIG.PSU__USE__S_AXI_GP3 {1} \
|
|
CONFIG.PSU__USE__S_AXI_GP4 {1} \
|
|
] $sys_ps8
|
|
|
|
|
|
# Create instance: sys_rstgen, and set properties
|
|
set sys_rstgen [ create_bd_cell -type ip -vlnv xilinx.com:ip:proc_sys_reset:5.0 sys_rstgen ]
|
|
set_property CONFIG.C_EXT_RST_WIDTH {1} $sys_rstgen
|
|
|
|
|
|
# Create instance: tx_device_clk_rstgen, and set properties
|
|
set tx_device_clk_rstgen [ create_bd_cell -type ip -vlnv xilinx.com:ip:proc_sys_reset:5.0 tx_device_clk_rstgen ]
|
|
|
|
# Create instance: tx_mxfe_tpl_core
|
|
create_hier_cell_tx_mxfe_tpl_core [current_bd_instance .] tx_mxfe_tpl_core
|
|
|
|
# Create instance: upack_reset_sources, and set properties
|
|
set upack_reset_sources [ create_bd_cell -type ip -vlnv xilinx.com:ip:xlconcat:2.1 upack_reset_sources ]
|
|
set_property CONFIG.NUM_PORTS {2} $upack_reset_sources
|
|
|
|
|
|
# Create instance: upack_rst_logic, and set properties
|
|
set upack_rst_logic [ create_bd_cell -type ip -vlnv xilinx.com:ip:util_reduced_logic:2.0 upack_rst_logic ]
|
|
set_property -dict [list \
|
|
CONFIG.C_OPERATION {or} \
|
|
CONFIG.C_SIZE {2} \
|
|
] $upack_rst_logic
|
|
|
|
|
|
# Create instance: util_mxfe_cpack, and set properties
|
|
set util_mxfe_cpack [ create_bd_cell -type ip -vlnv analog.com:user:util_cpack2:1.0 util_mxfe_cpack ]
|
|
set_property -dict [list \
|
|
CONFIG.NUM_OF_CHANNELS {8} \
|
|
CONFIG.SAMPLES_PER_CHANNEL {1} \
|
|
CONFIG.SAMPLE_DATA_WIDTH {16} \
|
|
] $util_mxfe_cpack
|
|
|
|
|
|
# Create instance: util_mxfe_upack, and set properties
|
|
set util_mxfe_upack [ create_bd_cell -type ip -vlnv analog.com:user:util_upack2:1.0 util_mxfe_upack ]
|
|
set_property -dict [list \
|
|
CONFIG.NUM_OF_CHANNELS {8} \
|
|
CONFIG.SAMPLES_PER_CHANNEL {1} \
|
|
CONFIG.SAMPLE_DATA_WIDTH {16} \
|
|
] $util_mxfe_upack
|
|
|
|
|
|
# Create instance: util_mxfe_xcvr, and set properties
|
|
set util_mxfe_xcvr [ create_bd_cell -type ip -vlnv analog.com:user:util_adxcvr:1.0 util_mxfe_xcvr ]
|
|
set_property -dict [list \
|
|
CONFIG.A_TXDIFFCTRL {0x0C} \
|
|
CONFIG.CH_HSPMUX {0x6868} \
|
|
CONFIG.CPLL_CFG0 {0x01FA} \
|
|
CONFIG.CPLL_CFG1 {0x0023} \
|
|
CONFIG.CPLL_CFG2 {0x0002} \
|
|
CONFIG.CPLL_FBDIV {2} \
|
|
CONFIG.CPLL_FBDIV_4_5 {5} \
|
|
CONFIG.LINK_MODE {1} \
|
|
CONFIG.POR_CFG {0x0000} \
|
|
CONFIG.PPF0_CFG {0x0F00} \
|
|
CONFIG.PREIQ_FREQ_BST {1} \
|
|
CONFIG.QPLL_CFG0 {0x333c} \
|
|
CONFIG.QPLL_CFG4 {0x0045} \
|
|
CONFIG.QPLL_CP {0x0FF} \
|
|
CONFIG.QPLL_CP_G3 {0x00F} \
|
|
CONFIG.QPLL_FBDIV {"0000010100"} \
|
|
CONFIG.QPLL_LPF {0x2FF} \
|
|
CONFIG.QPLL_REFCLK_DIV {1} \
|
|
CONFIG.RXCDR_CFG0 {0x0003} \
|
|
CONFIG.RXCDR_CFG2_GEN2 {0x265} \
|
|
CONFIG.RXCDR_CFG2_GEN4 {0x0164} \
|
|
CONFIG.RXCDR_CFG3 {0x0012} \
|
|
CONFIG.RXCDR_CFG3_GEN2 {0x12} \
|
|
CONFIG.RXCDR_CFG3_GEN3 {0x0012} \
|
|
CONFIG.RXCDR_CFG3_GEN4 {0x0012} \
|
|
CONFIG.RXPI_CFG0 {0x0200} \
|
|
CONFIG.RXPI_CFG1 {0x00FD} \
|
|
CONFIG.RX_CLK25_DIV {31} \
|
|
CONFIG.RX_LANE_RATE {10} \
|
|
CONFIG.RX_NUM_OF_LANES {4} \
|
|
CONFIG.RX_OUT_DIV {1} \
|
|
CONFIG.RX_WIDEMODE_CDR {0x0} \
|
|
CONFIG.TXPI_CFG {0x0000} \
|
|
CONFIG.TX_CLK25_DIV {31} \
|
|
CONFIG.TX_LANE_RATE {10} \
|
|
CONFIG.TX_NUM_OF_LANES {4} \
|
|
CONFIG.TX_PI_BIASSET {3} \
|
|
] $util_mxfe_xcvr
|
|
|
|
|
|
# Create interface connections
|
|
connect_bd_intf_net -intf_net axi_cpu_interconnect_M00_AXI [get_bd_intf_pins axi_cpu_interconnect/M00_AXI] [get_bd_intf_pins axi_sysid_0/s_axi]
|
|
connect_bd_intf_net -intf_net axi_cpu_interconnect_M01_AXI [get_bd_intf_pins axi_cpu_interconnect/M01_AXI] [get_bd_intf_pins axi_mxfe_rx_xcvr/s_axi]
|
|
connect_bd_intf_net -intf_net axi_cpu_interconnect_M02_AXI [get_bd_intf_pins axi_cpu_interconnect/M02_AXI] [get_bd_intf_pins rx_mxfe_tpl_core/s_axi]
|
|
connect_bd_intf_net -intf_net axi_cpu_interconnect_M03_AXI [get_bd_intf_pins axi_cpu_interconnect/M03_AXI] [get_bd_intf_pins axi_mxfe_rx_jesd/s_axi]
|
|
connect_bd_intf_net -intf_net axi_cpu_interconnect_M04_AXI [get_bd_intf_pins axi_cpu_interconnect/M04_AXI] [get_bd_intf_pins axi_mxfe_rx_dma/s_axi]
|
|
connect_bd_intf_net -intf_net axi_cpu_interconnect_M05_AXI [get_bd_intf_pins axi_cpu_interconnect/M05_AXI] [get_bd_intf_pins mxfe_rx_data_offload/s_axi]
|
|
connect_bd_intf_net -intf_net axi_cpu_interconnect_M06_AXI [get_bd_intf_pins axi_cpu_interconnect/M06_AXI] [get_bd_intf_pins axi_mxfe_tx_xcvr/s_axi]
|
|
connect_bd_intf_net -intf_net axi_cpu_interconnect_M07_AXI [get_bd_intf_pins axi_cpu_interconnect/M07_AXI] [get_bd_intf_pins tx_mxfe_tpl_core/s_axi]
|
|
connect_bd_intf_net -intf_net axi_cpu_interconnect_M08_AXI [get_bd_intf_pins axi_cpu_interconnect/M08_AXI] [get_bd_intf_pins axi_mxfe_tx_jesd/s_axi]
|
|
connect_bd_intf_net -intf_net axi_cpu_interconnect_M09_AXI [get_bd_intf_pins axi_cpu_interconnect/M09_AXI] [get_bd_intf_pins axi_mxfe_tx_dma/s_axi]
|
|
connect_bd_intf_net -intf_net axi_cpu_interconnect_M10_AXI [get_bd_intf_pins axi_cpu_interconnect/M10_AXI] [get_bd_intf_pins mxfe_tx_data_offload/s_axi]
|
|
connect_bd_intf_net -intf_net axi_cpu_interconnect_M12_AXI [get_bd_intf_pins axi_cpu_interconnect/M12_AXI] [get_bd_intf_pins pdw_generator_0/S00_AXI]
|
|
connect_bd_intf_net -intf_net axi_cpu_interconnect_M13_AXI [get_bd_intf_pins axi_cpu_interconnect/M13_AXI] [get_bd_intf_pins pdw_generator_0/S01_AXI]
|
|
connect_bd_intf_net -intf_net axi_cpu_interconnect_M14_AXI [get_bd_intf_pins axi_cpu_interconnect/M14_AXI] [get_bd_intf_pins pdw_generator_0/S02_AXI]
|
|
connect_bd_intf_net -intf_net axi_cpu_interconnect_M15_AXI [get_bd_intf_pins axi_cpu_interconnect/M15_AXI] [get_bd_intf_pins pdw_generator_0/S03_AXI]
|
|
connect_bd_intf_net -intf_net axi_hp0_interconnect_M00_AXI [get_bd_intf_pins axi_hp0_interconnect/M00_AXI] [get_bd_intf_pins sys_ps8/S_AXI_HP0_FPD]
|
|
connect_bd_intf_net -intf_net axi_hp1_interconnect_M00_AXI [get_bd_intf_pins axi_hp1_interconnect/M00_AXI] [get_bd_intf_pins sys_ps8/S_AXI_HP1_FPD]
|
|
connect_bd_intf_net -intf_net axi_hp2_interconnect_M00_AXI [get_bd_intf_pins axi_hp2_interconnect/M00_AXI] [get_bd_intf_pins sys_ps8/S_AXI_HP2_FPD]
|
|
connect_bd_intf_net -intf_net axi_mxfe_rx_dma_m_dest_axi [get_bd_intf_pins axi_hp1_interconnect/S00_AXI] [get_bd_intf_pins axi_mxfe_rx_dma/m_dest_axi]
|
|
connect_bd_intf_net -intf_net axi_mxfe_rx_xcvr_m_axi [get_bd_intf_pins axi_hp0_interconnect/S00_AXI] [get_bd_intf_pins axi_mxfe_rx_xcvr/m_axi]
|
|
connect_bd_intf_net -intf_net axi_mxfe_rx_xcvr_up_ch_0 [get_bd_intf_pins axi_mxfe_rx_xcvr/up_ch_0] [get_bd_intf_pins util_mxfe_xcvr/up_rx_0]
|
|
connect_bd_intf_net -intf_net axi_mxfe_rx_xcvr_up_ch_1 [get_bd_intf_pins axi_mxfe_rx_xcvr/up_ch_1] [get_bd_intf_pins util_mxfe_xcvr/up_rx_1]
|
|
connect_bd_intf_net -intf_net axi_mxfe_rx_xcvr_up_ch_2 [get_bd_intf_pins axi_mxfe_rx_xcvr/up_ch_2] [get_bd_intf_pins util_mxfe_xcvr/up_rx_2]
|
|
connect_bd_intf_net -intf_net axi_mxfe_rx_xcvr_up_ch_3 [get_bd_intf_pins axi_mxfe_rx_xcvr/up_ch_3] [get_bd_intf_pins util_mxfe_xcvr/up_rx_3]
|
|
connect_bd_intf_net -intf_net axi_mxfe_rx_xcvr_up_es_0 [get_bd_intf_pins axi_mxfe_rx_xcvr/up_es_0] [get_bd_intf_pins util_mxfe_xcvr/up_es_0]
|
|
connect_bd_intf_net -intf_net axi_mxfe_rx_xcvr_up_es_1 [get_bd_intf_pins axi_mxfe_rx_xcvr/up_es_1] [get_bd_intf_pins util_mxfe_xcvr/up_es_1]
|
|
connect_bd_intf_net -intf_net axi_mxfe_rx_xcvr_up_es_2 [get_bd_intf_pins axi_mxfe_rx_xcvr/up_es_2] [get_bd_intf_pins util_mxfe_xcvr/up_es_2]
|
|
connect_bd_intf_net -intf_net axi_mxfe_rx_xcvr_up_es_3 [get_bd_intf_pins axi_mxfe_rx_xcvr/up_es_3] [get_bd_intf_pins util_mxfe_xcvr/up_es_3]
|
|
connect_bd_intf_net -intf_net axi_mxfe_tx_dma_m_src_axi [get_bd_intf_pins axi_hp2_interconnect/S00_AXI] [get_bd_intf_pins axi_mxfe_tx_dma/m_src_axi]
|
|
connect_bd_intf_net -intf_net axi_mxfe_tx_jesd_tx_phy0 [get_bd_intf_pins axi_mxfe_tx_jesd/tx_phy0] [get_bd_intf_pins util_mxfe_xcvr/tx_0]
|
|
connect_bd_intf_net -intf_net axi_mxfe_tx_jesd_tx_phy1 [get_bd_intf_pins axi_mxfe_tx_jesd/tx_phy1] [get_bd_intf_pins util_mxfe_xcvr/tx_1]
|
|
connect_bd_intf_net -intf_net axi_mxfe_tx_jesd_tx_phy2 [get_bd_intf_pins axi_mxfe_tx_jesd/tx_phy2] [get_bd_intf_pins util_mxfe_xcvr/tx_2]
|
|
connect_bd_intf_net -intf_net axi_mxfe_tx_jesd_tx_phy3 [get_bd_intf_pins axi_mxfe_tx_jesd/tx_phy3] [get_bd_intf_pins util_mxfe_xcvr/tx_3]
|
|
connect_bd_intf_net -intf_net axi_mxfe_tx_xcvr_up_ch_0 [get_bd_intf_pins axi_mxfe_tx_xcvr/up_ch_0] [get_bd_intf_pins util_mxfe_xcvr/up_tx_0]
|
|
connect_bd_intf_net -intf_net axi_mxfe_tx_xcvr_up_ch_1 [get_bd_intf_pins axi_mxfe_tx_xcvr/up_ch_1] [get_bd_intf_pins util_mxfe_xcvr/up_tx_1]
|
|
connect_bd_intf_net -intf_net axi_mxfe_tx_xcvr_up_ch_2 [get_bd_intf_pins axi_mxfe_tx_xcvr/up_ch_2] [get_bd_intf_pins util_mxfe_xcvr/up_tx_2]
|
|
connect_bd_intf_net -intf_net axi_mxfe_tx_xcvr_up_ch_3 [get_bd_intf_pins axi_mxfe_tx_xcvr/up_ch_3] [get_bd_intf_pins util_mxfe_xcvr/up_tx_3]
|
|
connect_bd_intf_net -intf_net axi_mxfe_tx_xcvr_up_cm_0 [get_bd_intf_pins axi_mxfe_tx_xcvr/up_cm_0] [get_bd_intf_pins util_mxfe_xcvr/up_cm_0]
|
|
connect_bd_intf_net -intf_net mxfe_rx_data_offload_m_axis [get_bd_intf_pins axi_mxfe_rx_dma/s_axis] [get_bd_intf_pins mxfe_rx_data_offload/m_axis]
|
|
connect_bd_intf_net -intf_net mxfe_tx_data_offload_m_axis [get_bd_intf_pins mxfe_tx_data_offload/m_axis] [get_bd_intf_pins pdw_generator_0/s_axis]
|
|
connect_bd_intf_net -intf_net pdw_generator_0_m_axis [get_bd_intf_pins pdw_generator_0/m_axis] [get_bd_intf_pins util_mxfe_upack/s_axis]
|
|
connect_bd_intf_net -intf_net s_axis_1 [get_bd_intf_pins axi_mxfe_tx_dma/m_axis] [get_bd_intf_pins mxfe_tx_data_offload/s_axis]
|
|
connect_bd_intf_net -intf_net sys_ps8_M_AXI_HPM0_LPD [get_bd_intf_pins axi_cpu_interconnect/S00_AXI] [get_bd_intf_pins sys_ps8/M_AXI_HPM0_LPD]
|
|
connect_bd_intf_net -intf_net tx_mxfe_tpl_core_link [get_bd_intf_pins axi_mxfe_tx_jesd/tx_data] [get_bd_intf_pins tx_mxfe_tpl_core/link]
|
|
connect_bd_intf_net -intf_net util_mxfe_xcvr_rx_0 [get_bd_intf_pins axi_mxfe_rx_jesd/rx_phy0] [get_bd_intf_pins util_mxfe_xcvr/rx_0]
|
|
connect_bd_intf_net -intf_net util_mxfe_xcvr_rx_1 [get_bd_intf_pins axi_mxfe_rx_jesd/rx_phy1] [get_bd_intf_pins util_mxfe_xcvr/rx_1]
|
|
connect_bd_intf_net -intf_net util_mxfe_xcvr_rx_2 [get_bd_intf_pins axi_mxfe_rx_jesd/rx_phy2] [get_bd_intf_pins util_mxfe_xcvr/rx_2]
|
|
connect_bd_intf_net -intf_net util_mxfe_xcvr_rx_3 [get_bd_intf_pins axi_mxfe_rx_jesd/rx_phy3] [get_bd_intf_pins util_mxfe_xcvr/rx_3]
|
|
|
|
# Create port connections
|
|
connect_bd_net -net GND_1_dout [get_bd_pins GND_1/dout] [get_bd_pins mxfe_rx_data_offload/s_axis_tlast] [get_bd_pins mxfe_rx_data_offload/sync_ext] [get_bd_pins mxfe_tx_data_offload/sync_ext] [get_bd_pins sys_concat_intc_0/In0] [get_bd_pins sys_concat_intc_0/In1] [get_bd_pins sys_concat_intc_0/In2] [get_bd_pins sys_concat_intc_0/In3] [get_bd_pins sys_concat_intc_0/In4] [get_bd_pins sys_concat_intc_0/In5] [get_bd_pins sys_concat_intc_0/In6] [get_bd_pins sys_concat_intc_0/In7] [get_bd_pins sys_concat_intc_1/In0] [get_bd_pins sys_concat_intc_1/In1] [get_bd_pins sys_concat_intc_1/In6] [get_bd_pins sys_concat_intc_1/In7] [get_bd_pins sys_ps8/emio_spi0_s_i] [get_bd_pins sys_ps8/emio_spi0_sclk_i] [get_bd_pins sys_ps8/emio_spi1_s_i] [get_bd_pins sys_ps8/emio_spi1_sclk_i] [get_bd_pins tx_mxfe_tpl_core/dac_dunf]
|
|
connect_bd_net -net VCC_1_dout [get_bd_pins VCC_1/dout] [get_bd_pins mxfe_rx_data_offload/s_axis_tkeep] [get_bd_pins sys_ps8/emio_spi0_ss_i_n] [get_bd_pins sys_ps8/emio_spi1_ss_i_n]
|
|
connect_bd_net -net adc_dovf_1 [get_bd_pins rx_mxfe_tpl_core/adc_dovf] [get_bd_pins util_mxfe_cpack/fifo_wr_overflow]
|
|
connect_bd_net -net axi_mxfe_rx_dma_irq [get_bd_pins axi_mxfe_rx_dma/irq] [get_bd_pins sys_concat_intc_1/In5]
|
|
connect_bd_net -net axi_mxfe_rx_jesd_irq [get_bd_pins axi_mxfe_rx_jesd/irq] [get_bd_pins sys_concat_intc_1/In3]
|
|
connect_bd_net -net axi_mxfe_rx_jesd_phy_en_char_align [get_bd_pins axi_mxfe_rx_jesd/phy_en_char_align] [get_bd_pins util_mxfe_xcvr/rx_calign_0] [get_bd_pins util_mxfe_xcvr/rx_calign_1] [get_bd_pins util_mxfe_xcvr/rx_calign_2] [get_bd_pins util_mxfe_xcvr/rx_calign_3]
|
|
connect_bd_net -net axi_mxfe_rx_jesd_rx_data_tdata [get_bd_pins axi_mxfe_rx_jesd/rx_data_tdata] [get_bd_pins rx_mxfe_tpl_core/link_data]
|
|
connect_bd_net -net axi_mxfe_rx_jesd_rx_data_tvalid [get_bd_pins axi_mxfe_rx_jesd/rx_data_tvalid] [get_bd_pins rx_mxfe_tpl_core/link_valid]
|
|
connect_bd_net -net axi_mxfe_rx_jesd_rx_sof [get_bd_pins axi_mxfe_rx_jesd/rx_sof] [get_bd_pins rx_mxfe_tpl_core/link_sof]
|
|
connect_bd_net -net axi_mxfe_rx_jesd_sync [get_bd_ports rx_sync_0] [get_bd_pins axi_mxfe_rx_jesd/sync]
|
|
connect_bd_net -net axi_mxfe_rx_xcvr_up_pll_rst [get_bd_pins axi_mxfe_rx_xcvr/up_pll_rst] [get_bd_pins util_mxfe_xcvr/up_cpll_rst_0] [get_bd_pins util_mxfe_xcvr/up_cpll_rst_1] [get_bd_pins util_mxfe_xcvr/up_cpll_rst_2] [get_bd_pins util_mxfe_xcvr/up_cpll_rst_3]
|
|
connect_bd_net -net axi_mxfe_tx_dma_irq [get_bd_pins axi_mxfe_tx_dma/irq] [get_bd_pins sys_concat_intc_1/In4]
|
|
connect_bd_net -net axi_mxfe_tx_jesd_irq [get_bd_pins axi_mxfe_tx_jesd/irq] [get_bd_pins sys_concat_intc_1/In2]
|
|
connect_bd_net -net axi_mxfe_tx_xcvr_up_pll_rst [get_bd_pins axi_mxfe_tx_xcvr/up_pll_rst] [get_bd_pins util_mxfe_xcvr/up_qpll_rst_0]
|
|
connect_bd_net -net axi_sysid_0_rom_addr [get_bd_pins axi_sysid_0/rom_addr] [get_bd_pins rom_sys_0/rom_addr]
|
|
connect_bd_net -net cpack_reset_sources_dout [get_bd_pins cpack_reset_sources/dout] [get_bd_pins cpack_rst_logic/Op1]
|
|
connect_bd_net -net cpack_rst_logic_Res [get_bd_pins cpack_rst_logic/Res] [get_bd_pins util_mxfe_cpack/reset]
|
|
connect_bd_net -net ext_sync_in_1 [get_bd_ports ext_sync_in] [get_bd_pins rx_mxfe_tpl_core/ext_sync_in] [get_bd_pins tx_mxfe_tpl_core/ext_sync_in]
|
|
connect_bd_net -net ext_trigger_in_0_1 [get_bd_ports ext_trigger_in] [get_bd_pins pdw_generator_0/ext_trigger_in]
|
|
connect_bd_net -net gpio_i_1 [get_bd_ports gpio_i] [get_bd_pins sys_ps8/emio_gpio_i]
|
|
connect_bd_net -net init_req_1 [get_bd_pins axi_mxfe_rx_dma/s_axis_xfer_req] [get_bd_pins mxfe_rx_data_offload/init_req]
|
|
connect_bd_net -net init_req_2 [get_bd_pins axi_mxfe_tx_dma/m_axis_xfer_req] [get_bd_pins mxfe_tx_data_offload/init_req]
|
|
connect_bd_net -net manual_sync_or_Res [get_bd_pins manual_sync_or/Res] [get_bd_pins rx_mxfe_tpl_core/adc_sync_manual_req_in] [get_bd_pins tx_mxfe_tpl_core/dac_sync_manual_req_in]
|
|
connect_bd_net -net mxfe_rx_data_offload_s_axis_tready [get_bd_pins mxfe_rx_data_offload/s_axis_tready] [get_bd_pins rx_do_rstout_logic/Op1]
|
|
connect_bd_net -net pdw_generator_0_fpga_reboot_out [get_bd_ports fpga_reboot_out_0] [get_bd_pins pdw_generator_0/fpga_reboot_out]
|
|
connect_bd_net -net ref_clk_q0_1 [get_bd_ports ref_clk_q0] [get_bd_pins util_mxfe_xcvr/cpll_ref_clk_0] [get_bd_pins util_mxfe_xcvr/cpll_ref_clk_1] [get_bd_pins util_mxfe_xcvr/cpll_ref_clk_2] [get_bd_pins util_mxfe_xcvr/cpll_ref_clk_3] [get_bd_pins util_mxfe_xcvr/qpll_ref_clk_0]
|
|
connect_bd_net -net rom_sys_0_rom_data [get_bd_pins axi_sysid_0/sys_rom_data] [get_bd_pins rom_sys_0/rom_data]
|
|
connect_bd_net -net rx_data_0_n_1 [get_bd_ports rx_data_0_n] [get_bd_pins util_mxfe_xcvr/rx_0_n]
|
|
connect_bd_net -net rx_data_0_p_1 [get_bd_ports rx_data_0_p] [get_bd_pins util_mxfe_xcvr/rx_0_p]
|
|
connect_bd_net -net rx_data_1_n_1 [get_bd_ports rx_data_1_n] [get_bd_pins util_mxfe_xcvr/rx_1_n]
|
|
connect_bd_net -net rx_data_1_p_1 [get_bd_ports rx_data_1_p] [get_bd_pins util_mxfe_xcvr/rx_1_p]
|
|
connect_bd_net -net rx_data_2_n_1 [get_bd_ports rx_data_2_n] [get_bd_pins util_mxfe_xcvr/rx_2_n]
|
|
connect_bd_net -net rx_data_2_p_1 [get_bd_ports rx_data_2_p] [get_bd_pins util_mxfe_xcvr/rx_2_p]
|
|
connect_bd_net -net rx_data_3_n_1 [get_bd_ports rx_data_3_n] [get_bd_pins util_mxfe_xcvr/rx_3_n]
|
|
connect_bd_net -net rx_data_3_p_1 [get_bd_ports rx_data_3_p] [get_bd_pins util_mxfe_xcvr/rx_3_p]
|
|
connect_bd_net -net rx_device_clk_1 [get_bd_ports rx_device_clk] [get_bd_pins axi_mxfe_rx_jesd/device_clk] [get_bd_pins mxfe_rx_data_offload/s_axis_aclk] [get_bd_pins rx_device_clk_rstgen/slowest_sync_clk] [get_bd_pins rx_mxfe_tpl_core/link_clk] [get_bd_pins util_mxfe_cpack/clk]
|
|
connect_bd_net -net rx_device_clk_rstgen_peripheral_aresetn [get_bd_pins mxfe_rx_data_offload/s_axis_aresetn] [get_bd_pins rx_device_clk_rstgen/peripheral_aresetn]
|
|
connect_bd_net -net rx_device_clk_rstgen_peripheral_reset [get_bd_pins cpack_reset_sources/In0] [get_bd_pins rx_device_clk_rstgen/peripheral_reset]
|
|
connect_bd_net -net rx_do_rstout_logic_Res [get_bd_pins cpack_reset_sources/In2] [get_bd_pins rx_do_rstout_logic/Res]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_data_0 [get_bd_pins rx_mxfe_tpl_core/adc_data_0] [get_bd_pins util_mxfe_cpack/fifo_wr_data_0]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_data_1 [get_bd_pins rx_mxfe_tpl_core/adc_data_1] [get_bd_pins util_mxfe_cpack/fifo_wr_data_1]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_data_2 [get_bd_pins rx_mxfe_tpl_core/adc_data_2] [get_bd_pins util_mxfe_cpack/fifo_wr_data_2]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_data_3 [get_bd_pins rx_mxfe_tpl_core/adc_data_3] [get_bd_pins util_mxfe_cpack/fifo_wr_data_3]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_data_4 [get_bd_pins rx_mxfe_tpl_core/adc_data_4] [get_bd_pins util_mxfe_cpack/fifo_wr_data_4]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_data_5 [get_bd_pins rx_mxfe_tpl_core/adc_data_5] [get_bd_pins util_mxfe_cpack/fifo_wr_data_5]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_data_6 [get_bd_pins rx_mxfe_tpl_core/adc_data_6] [get_bd_pins util_mxfe_cpack/fifo_wr_data_6]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_data_7 [get_bd_pins rx_mxfe_tpl_core/adc_data_7] [get_bd_pins util_mxfe_cpack/fifo_wr_data_7]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_enable_0 [get_bd_pins rx_mxfe_tpl_core/adc_enable_0] [get_bd_pins util_mxfe_cpack/enable_0]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_enable_1 [get_bd_pins rx_mxfe_tpl_core/adc_enable_1] [get_bd_pins util_mxfe_cpack/enable_1]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_enable_2 [get_bd_pins rx_mxfe_tpl_core/adc_enable_2] [get_bd_pins util_mxfe_cpack/enable_2]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_enable_3 [get_bd_pins rx_mxfe_tpl_core/adc_enable_3] [get_bd_pins util_mxfe_cpack/enable_3]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_enable_4 [get_bd_pins rx_mxfe_tpl_core/adc_enable_4] [get_bd_pins util_mxfe_cpack/enable_4]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_enable_5 [get_bd_pins rx_mxfe_tpl_core/adc_enable_5] [get_bd_pins util_mxfe_cpack/enable_5]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_enable_6 [get_bd_pins rx_mxfe_tpl_core/adc_enable_6] [get_bd_pins util_mxfe_cpack/enable_6]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_enable_7 [get_bd_pins rx_mxfe_tpl_core/adc_enable_7] [get_bd_pins util_mxfe_cpack/enable_7]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_rst [get_bd_pins cpack_reset_sources/In1] [get_bd_pins rx_mxfe_tpl_core/adc_rst]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_sync_manual_req_out [get_bd_pins manual_sync_or/Op1] [get_bd_pins rx_mxfe_tpl_core/adc_sync_manual_req_out]
|
|
connect_bd_net -net rx_mxfe_tpl_core_adc_valid_0 [get_bd_pins rx_mxfe_tpl_core/adc_valid_0] [get_bd_pins util_mxfe_cpack/fifo_wr_en]
|
|
connect_bd_net -net spi0_csn_concat_dout [get_bd_ports spi0_csn] [get_bd_pins spi0_csn_concat/dout]
|
|
connect_bd_net -net spi0_miso_1 [get_bd_ports spi0_miso] [get_bd_pins sys_ps8/emio_spi0_m_i]
|
|
connect_bd_net -net spi1_csn_concat_dout [get_bd_ports spi1_csn] [get_bd_pins spi1_csn_concat/dout]
|
|
connect_bd_net -net spi1_miso_1 [get_bd_ports spi1_miso] [get_bd_pins sys_ps8/emio_spi1_m_i]
|
|
connect_bd_net -net sync_1 [get_bd_ports tx_sync_0] [get_bd_pins axi_mxfe_tx_jesd/sync]
|
|
connect_bd_net -net sys_250m_clk [get_bd_pins axi_hp1_interconnect/aclk1] [get_bd_pins axi_hp2_interconnect/aclk] [get_bd_pins axi_mxfe_rx_dma/m_dest_axi_aclk] [get_bd_pins axi_mxfe_rx_dma/s_axis_aclk] [get_bd_pins axi_mxfe_tx_dma/m_axis_aclk] [get_bd_pins axi_mxfe_tx_dma/m_src_axi_aclk] [get_bd_pins mxfe_rx_data_offload/m_axis_aclk] [get_bd_pins mxfe_tx_data_offload/s_axis_aclk] [get_bd_pins sys_250m_rstgen/slowest_sync_clk] [get_bd_pins sys_ps8/pl_clk1] [get_bd_pins sys_ps8/saxihp2_fpd_aclk]
|
|
connect_bd_net -net sys_250m_reset [get_bd_pins sys_250m_rstgen/peripheral_reset]
|
|
connect_bd_net -net sys_250m_resetn [get_bd_pins axi_hp2_interconnect/aresetn] [get_bd_pins axi_mxfe_rx_dma/m_dest_axi_aresetn] [get_bd_pins axi_mxfe_tx_dma/m_src_axi_aresetn] [get_bd_pins mxfe_rx_data_offload/m_axis_aresetn] [get_bd_pins mxfe_tx_data_offload/s_axis_aresetn] [get_bd_pins sys_250m_rstgen/peripheral_aresetn]
|
|
connect_bd_net -net sys_500m_clk [get_bd_pins sys_500m_rstgen/slowest_sync_clk] [get_bd_pins sys_ps8/pl_clk2]
|
|
connect_bd_net -net sys_500m_reset [get_bd_pins sys_500m_rstgen/peripheral_reset]
|
|
connect_bd_net -net sys_500m_resetn [get_bd_pins sys_500m_rstgen/peripheral_aresetn]
|
|
connect_bd_net -net sys_concat_intc_0_dout [get_bd_pins sys_concat_intc_0/dout] [get_bd_pins sys_ps8/pl_ps_irq0]
|
|
connect_bd_net -net sys_concat_intc_1_dout [get_bd_pins sys_concat_intc_1/dout] [get_bd_pins sys_ps8/pl_ps_irq1]
|
|
connect_bd_net -net sys_cpu_clk [get_bd_ports clk100_out] [get_bd_pins axi_cpu_interconnect/aclk] [get_bd_pins axi_hp0_interconnect/aclk] [get_bd_pins axi_hp1_interconnect/aclk] [get_bd_pins axi_mxfe_rx_dma/s_axi_aclk] [get_bd_pins axi_mxfe_rx_jesd/s_axi_aclk] [get_bd_pins axi_mxfe_rx_xcvr/s_axi_aclk] [get_bd_pins axi_mxfe_tx_dma/s_axi_aclk] [get_bd_pins axi_mxfe_tx_jesd/s_axi_aclk] [get_bd_pins axi_mxfe_tx_xcvr/s_axi_aclk] [get_bd_pins axi_sysid_0/s_axi_aclk] [get_bd_pins mxfe_rx_data_offload/s_axi_aclk] [get_bd_pins mxfe_tx_data_offload/s_axi_aclk] [get_bd_pins pdw_generator_0/s00_axi_aclk] [get_bd_pins pdw_generator_0/s01_axi_aclk] [get_bd_pins pdw_generator_0/s02_axi_aclk] [get_bd_pins pdw_generator_0/s03_axi_aclk] [get_bd_pins rom_sys_0/clk] [get_bd_pins rx_mxfe_tpl_core/s_axi_aclk] [get_bd_pins sys_ps8/maxihpm0_lpd_aclk] [get_bd_pins sys_ps8/pl_clk0] [get_bd_pins sys_ps8/saxihp0_fpd_aclk] [get_bd_pins sys_ps8/saxihp1_fpd_aclk] [get_bd_pins sys_rstgen/slowest_sync_clk] [get_bd_pins tx_mxfe_tpl_core/s_axi_aclk] [get_bd_pins util_mxfe_xcvr/up_clk]
|
|
connect_bd_net -net sys_cpu_reset [get_bd_pins sys_rstgen/peripheral_reset]
|
|
connect_bd_net -net sys_cpu_resetn [get_bd_pins axi_cpu_interconnect/aresetn] [get_bd_pins axi_hp0_interconnect/aresetn] [get_bd_pins axi_hp1_interconnect/aresetn] [get_bd_pins axi_mxfe_rx_dma/s_axi_aresetn] [get_bd_pins axi_mxfe_rx_jesd/s_axi_aresetn] [get_bd_pins axi_mxfe_rx_xcvr/s_axi_aresetn] [get_bd_pins axi_mxfe_tx_dma/s_axi_aresetn] [get_bd_pins axi_mxfe_tx_jesd/s_axi_aresetn] [get_bd_pins axi_mxfe_tx_xcvr/s_axi_aresetn] [get_bd_pins axi_sysid_0/s_axi_aresetn] [get_bd_pins mxfe_rx_data_offload/s_axi_aresetn] [get_bd_pins mxfe_tx_data_offload/s_axi_aresetn] [get_bd_pins pdw_generator_0/s00_axi_aresetn] [get_bd_pins pdw_generator_0/s01_axi_aresetn] [get_bd_pins pdw_generator_0/s02_axi_aresetn] [get_bd_pins pdw_generator_0/s03_axi_aresetn] [get_bd_pins rx_device_clk_rstgen/ext_reset_in] [get_bd_pins rx_mxfe_tpl_core/s_axi_aresetn] [get_bd_pins sys_rstgen/peripheral_aresetn] [get_bd_pins tx_device_clk_rstgen/ext_reset_in] [get_bd_pins tx_mxfe_tpl_core/s_axi_aresetn] [get_bd_pins util_mxfe_xcvr/up_rstn]
|
|
connect_bd_net -net sys_ps8_emio_gpio_o [get_bd_ports gpio_o] [get_bd_pins sys_ps8/emio_gpio_o]
|
|
connect_bd_net -net sys_ps8_emio_gpio_t [get_bd_ports gpio_t] [get_bd_pins sys_ps8/emio_gpio_t]
|
|
connect_bd_net -net sys_ps8_emio_spi0_m_o [get_bd_ports spi0_mosi] [get_bd_pins sys_ps8/emio_spi0_m_o]
|
|
connect_bd_net -net sys_ps8_emio_spi0_sclk_o [get_bd_ports spi0_sclk] [get_bd_pins sys_ps8/emio_spi0_sclk_o]
|
|
connect_bd_net -net sys_ps8_emio_spi0_ss1_o_n [get_bd_pins spi0_csn_concat/In1] [get_bd_pins sys_ps8/emio_spi0_ss1_o_n]
|
|
connect_bd_net -net sys_ps8_emio_spi0_ss2_o_n [get_bd_pins spi0_csn_concat/In2] [get_bd_pins sys_ps8/emio_spi0_ss2_o_n]
|
|
connect_bd_net -net sys_ps8_emio_spi0_ss_o_n [get_bd_pins spi0_csn_concat/In0] [get_bd_pins sys_ps8/emio_spi0_ss_o_n]
|
|
connect_bd_net -net sys_ps8_emio_spi1_m_o [get_bd_ports spi1_mosi] [get_bd_pins sys_ps8/emio_spi1_m_o]
|
|
connect_bd_net -net sys_ps8_emio_spi1_sclk_o [get_bd_ports spi1_sclk] [get_bd_pins sys_ps8/emio_spi1_sclk_o]
|
|
connect_bd_net -net sys_ps8_emio_spi1_ss1_o_n [get_bd_pins spi1_csn_concat/In1] [get_bd_pins sys_ps8/emio_spi1_ss1_o_n]
|
|
connect_bd_net -net sys_ps8_emio_spi1_ss2_o_n [get_bd_pins spi1_csn_concat/In2] [get_bd_pins sys_ps8/emio_spi1_ss2_o_n]
|
|
connect_bd_net -net sys_ps8_emio_spi1_ss_o_n [get_bd_pins spi1_csn_concat/In0] [get_bd_pins sys_ps8/emio_spi1_ss_o_n]
|
|
connect_bd_net -net sys_ps8_pl_resetn0 [get_bd_pins sys_250m_rstgen/ext_reset_in] [get_bd_pins sys_500m_rstgen/ext_reset_in] [get_bd_pins sys_ps8/pl_resetn0] [get_bd_pins sys_rstgen/ext_reset_in]
|
|
connect_bd_net -net sysref_1 [get_bd_ports rx_sysref_0] [get_bd_pins axi_mxfe_rx_jesd/sysref]
|
|
connect_bd_net -net sysref_2 [get_bd_ports tx_sysref_0] [get_bd_pins axi_mxfe_tx_jesd/sysref]
|
|
connect_bd_net -net tx_device_clk_1 [get_bd_ports tx_device_clk] [get_bd_pins axi_mxfe_tx_jesd/device_clk] [get_bd_pins mxfe_tx_data_offload/m_axis_aclk] [get_bd_pins pdw_generator_0/m_axis_aclk] [get_bd_pins tx_device_clk_rstgen/slowest_sync_clk] [get_bd_pins tx_mxfe_tpl_core/link_clk] [get_bd_pins util_mxfe_upack/clk]
|
|
connect_bd_net -net tx_device_clk_rstgen_peripheral_aresetn [get_bd_pins mxfe_tx_data_offload/m_axis_aresetn] [get_bd_pins tx_device_clk_rstgen/peripheral_aresetn]
|
|
connect_bd_net -net tx_device_clk_rstgen_peripheral_reset [get_bd_pins tx_device_clk_rstgen/peripheral_reset] [get_bd_pins upack_reset_sources/In0]
|
|
connect_bd_net -net tx_mxfe_tpl_core_dac_enable_0 [get_bd_pins tx_mxfe_tpl_core/dac_enable_0] [get_bd_pins util_mxfe_upack/enable_0]
|
|
connect_bd_net -net tx_mxfe_tpl_core_dac_enable_1 [get_bd_pins tx_mxfe_tpl_core/dac_enable_1] [get_bd_pins util_mxfe_upack/enable_1]
|
|
connect_bd_net -net tx_mxfe_tpl_core_dac_enable_2 [get_bd_pins tx_mxfe_tpl_core/dac_enable_2] [get_bd_pins util_mxfe_upack/enable_2]
|
|
connect_bd_net -net tx_mxfe_tpl_core_dac_enable_3 [get_bd_pins tx_mxfe_tpl_core/dac_enable_3] [get_bd_pins util_mxfe_upack/enable_3]
|
|
connect_bd_net -net tx_mxfe_tpl_core_dac_enable_4 [get_bd_pins tx_mxfe_tpl_core/dac_enable_4] [get_bd_pins util_mxfe_upack/enable_4]
|
|
connect_bd_net -net tx_mxfe_tpl_core_dac_enable_5 [get_bd_pins tx_mxfe_tpl_core/dac_enable_5] [get_bd_pins util_mxfe_upack/enable_5]
|
|
connect_bd_net -net tx_mxfe_tpl_core_dac_enable_6 [get_bd_pins tx_mxfe_tpl_core/dac_enable_6] [get_bd_pins util_mxfe_upack/enable_6]
|
|
connect_bd_net -net tx_mxfe_tpl_core_dac_enable_7 [get_bd_pins tx_mxfe_tpl_core/dac_enable_7] [get_bd_pins util_mxfe_upack/enable_7]
|
|
connect_bd_net -net tx_mxfe_tpl_core_dac_rst [get_bd_pins tx_mxfe_tpl_core/dac_rst] [get_bd_pins upack_reset_sources/In1]
|
|
connect_bd_net -net tx_mxfe_tpl_core_dac_sync_manual_req_out [get_bd_pins manual_sync_or/Op2] [get_bd_pins tx_mxfe_tpl_core/dac_sync_manual_req_out]
|
|
connect_bd_net -net tx_mxfe_tpl_core_dac_valid_0 [get_bd_pins tx_mxfe_tpl_core/dac_valid_0] [get_bd_pins util_mxfe_upack/fifo_rd_en]
|
|
connect_bd_net -net upack_reset_sources_dout [get_bd_pins upack_reset_sources/dout] [get_bd_pins upack_rst_logic/Op1]
|
|
connect_bd_net -net upack_rst_logic_Res [get_bd_pins pdw_generator_0/reset] [get_bd_pins upack_rst_logic/Res] [get_bd_pins util_mxfe_upack/reset]
|
|
connect_bd_net -net util_mxfe_cpack_packed_fifo_wr_data [get_bd_pins mxfe_rx_data_offload/s_axis_tdata] [get_bd_pins util_mxfe_cpack/packed_fifo_wr_data]
|
|
connect_bd_net -net util_mxfe_cpack_packed_fifo_wr_en [get_bd_pins mxfe_rx_data_offload/s_axis_tvalid] [get_bd_pins util_mxfe_cpack/packed_fifo_wr_en]
|
|
connect_bd_net -net util_mxfe_upack_fifo_rd_data_0 [get_bd_pins tx_mxfe_tpl_core/dac_data_0] [get_bd_pins util_mxfe_upack/fifo_rd_data_0]
|
|
connect_bd_net -net util_mxfe_upack_fifo_rd_data_1 [get_bd_pins tx_mxfe_tpl_core/dac_data_1] [get_bd_pins util_mxfe_upack/fifo_rd_data_1]
|
|
connect_bd_net -net util_mxfe_upack_fifo_rd_data_2 [get_bd_pins tx_mxfe_tpl_core/dac_data_2] [get_bd_pins util_mxfe_upack/fifo_rd_data_2]
|
|
connect_bd_net -net util_mxfe_upack_fifo_rd_data_3 [get_bd_pins tx_mxfe_tpl_core/dac_data_3] [get_bd_pins util_mxfe_upack/fifo_rd_data_3]
|
|
connect_bd_net -net util_mxfe_upack_fifo_rd_data_4 [get_bd_pins tx_mxfe_tpl_core/dac_data_4] [get_bd_pins util_mxfe_upack/fifo_rd_data_4]
|
|
connect_bd_net -net util_mxfe_upack_fifo_rd_data_5 [get_bd_pins tx_mxfe_tpl_core/dac_data_5] [get_bd_pins util_mxfe_upack/fifo_rd_data_5]
|
|
connect_bd_net -net util_mxfe_upack_fifo_rd_data_6 [get_bd_pins tx_mxfe_tpl_core/dac_data_6] [get_bd_pins util_mxfe_upack/fifo_rd_data_6]
|
|
connect_bd_net -net util_mxfe_upack_fifo_rd_data_7 [get_bd_pins tx_mxfe_tpl_core/dac_data_7] [get_bd_pins util_mxfe_upack/fifo_rd_data_7]
|
|
connect_bd_net -net util_mxfe_xcvr_rx_out_clk_0 [get_bd_pins axi_mxfe_rx_jesd/link_clk] [get_bd_pins util_mxfe_xcvr/rx_clk_0] [get_bd_pins util_mxfe_xcvr/rx_clk_1] [get_bd_pins util_mxfe_xcvr/rx_clk_2] [get_bd_pins util_mxfe_xcvr/rx_clk_3] [get_bd_pins util_mxfe_xcvr/rx_out_clk_0]
|
|
connect_bd_net -net util_mxfe_xcvr_tx_0_n [get_bd_ports tx_data_0_n] [get_bd_pins util_mxfe_xcvr/tx_0_n]
|
|
connect_bd_net -net util_mxfe_xcvr_tx_0_p [get_bd_ports tx_data_0_p] [get_bd_pins util_mxfe_xcvr/tx_0_p]
|
|
connect_bd_net -net util_mxfe_xcvr_tx_1_n [get_bd_ports tx_data_1_n] [get_bd_pins util_mxfe_xcvr/tx_1_n]
|
|
connect_bd_net -net util_mxfe_xcvr_tx_1_p [get_bd_ports tx_data_1_p] [get_bd_pins util_mxfe_xcvr/tx_1_p]
|
|
connect_bd_net -net util_mxfe_xcvr_tx_2_n [get_bd_ports tx_data_2_n] [get_bd_pins util_mxfe_xcvr/tx_2_n]
|
|
connect_bd_net -net util_mxfe_xcvr_tx_2_p [get_bd_ports tx_data_2_p] [get_bd_pins util_mxfe_xcvr/tx_2_p]
|
|
connect_bd_net -net util_mxfe_xcvr_tx_3_n [get_bd_ports tx_data_3_n] [get_bd_pins util_mxfe_xcvr/tx_3_n]
|
|
connect_bd_net -net util_mxfe_xcvr_tx_3_p [get_bd_ports tx_data_3_p] [get_bd_pins util_mxfe_xcvr/tx_3_p]
|
|
connect_bd_net -net util_mxfe_xcvr_tx_out_clk_0 [get_bd_pins axi_mxfe_tx_jesd/link_clk] [get_bd_pins util_mxfe_xcvr/tx_clk_0] [get_bd_pins util_mxfe_xcvr/tx_clk_1] [get_bd_pins util_mxfe_xcvr/tx_clk_2] [get_bd_pins util_mxfe_xcvr/tx_clk_3] [get_bd_pins util_mxfe_xcvr/tx_out_clk_0]
|
|
|
|
# Create address segments
|
|
assign_bd_address -offset 0x00000000 -range 0x80000000 -target_address_space [get_bd_addr_spaces axi_mxfe_rx_dma/m_dest_axi] [get_bd_addr_segs sys_ps8/SAXIGP3/HP1_DDR_LOW] -force
|
|
assign_bd_address -offset 0x00000000 -range 0x80000000 -target_address_space [get_bd_addr_spaces axi_mxfe_rx_xcvr/m_axi] [get_bd_addr_segs sys_ps8/SAXIGP2/HP0_DDR_LOW] -force
|
|
assign_bd_address -offset 0xFF000000 -range 0x01000000 -target_address_space [get_bd_addr_spaces axi_mxfe_rx_xcvr/m_axi] [get_bd_addr_segs sys_ps8/SAXIGP2/HP0_LPS_OCM] -force
|
|
assign_bd_address -offset 0xE0000000 -range 0x10000000 -target_address_space [get_bd_addr_spaces axi_mxfe_rx_xcvr/m_axi] [get_bd_addr_segs sys_ps8/SAXIGP2/HP0_PCIE_LOW] -force
|
|
assign_bd_address -offset 0xC0000000 -range 0x20000000 -target_address_space [get_bd_addr_spaces axi_mxfe_rx_xcvr/m_axi] [get_bd_addr_segs sys_ps8/SAXIGP2/HP0_QSPI] -force
|
|
assign_bd_address -offset 0x00000000 -range 0x80000000 -target_address_space [get_bd_addr_spaces axi_mxfe_tx_dma/m_src_axi] [get_bd_addr_segs sys_ps8/SAXIGP4/HP2_DDR_LOW] -force
|
|
assign_bd_address -offset 0x84A10000 -range 0x00002000 -target_address_space [get_bd_addr_spaces sys_ps8/Data] [get_bd_addr_segs rx_mxfe_tpl_core/adc_tpl_core/s_axi/axi_lite] -force
|
|
assign_bd_address -offset 0x9C420000 -range 0x00001000 -target_address_space [get_bd_addr_spaces sys_ps8/Data] [get_bd_addr_segs axi_mxfe_rx_dma/s_axi/axi_lite] -force
|
|
assign_bd_address -offset 0x84A60000 -range 0x00010000 -target_address_space [get_bd_addr_spaces sys_ps8/Data] [get_bd_addr_segs axi_mxfe_rx_xcvr/s_axi/axi_lite] -force
|
|
assign_bd_address -offset 0x9C430000 -range 0x00001000 -target_address_space [get_bd_addr_spaces sys_ps8/Data] [get_bd_addr_segs axi_mxfe_tx_dma/s_axi/axi_lite] -force
|
|
assign_bd_address -offset 0x84B60000 -range 0x00010000 -target_address_space [get_bd_addr_spaces sys_ps8/Data] [get_bd_addr_segs axi_mxfe_tx_xcvr/s_axi/axi_lite] -force
|
|
assign_bd_address -offset 0x85000000 -range 0x00010000 -target_address_space [get_bd_addr_spaces sys_ps8/Data] [get_bd_addr_segs axi_sysid_0/s_axi/axi_lite] -force
|
|
assign_bd_address -offset 0x84B10000 -range 0x00002000 -target_address_space [get_bd_addr_spaces sys_ps8/Data] [get_bd_addr_segs tx_mxfe_tpl_core/dac_tpl_core/s_axi/axi_lite] -force
|
|
assign_bd_address -offset 0x9C450000 -range 0x00010000 -target_address_space [get_bd_addr_spaces sys_ps8/Data] [get_bd_addr_segs mxfe_rx_data_offload/i_data_offload/s_axi/axi_lite] -force
|
|
assign_bd_address -offset 0x9C440000 -range 0x00010000 -target_address_space [get_bd_addr_spaces sys_ps8/Data] [get_bd_addr_segs mxfe_tx_data_offload/i_data_offload/s_axi/axi_lite] -force
|
|
assign_bd_address -offset 0x80000000 -range 0x00010000 -target_address_space [get_bd_addr_spaces sys_ps8/Data] [get_bd_addr_segs pdw_generator_0/S00_AXI/S00_AXI_reg] -force
|
|
assign_bd_address -offset 0x80010000 -range 0x00010000 -target_address_space [get_bd_addr_spaces sys_ps8/Data] [get_bd_addr_segs pdw_generator_0/S01_AXI/S01_AXI_reg] -force
|
|
assign_bd_address -offset 0x80020000 -range 0x00010000 -target_address_space [get_bd_addr_spaces sys_ps8/Data] [get_bd_addr_segs pdw_generator_0/S02_AXI/S02_AXI_reg] -force
|
|
assign_bd_address -offset 0x80030000 -range 0x00010000 -target_address_space [get_bd_addr_spaces sys_ps8/Data] [get_bd_addr_segs pdw_generator_0/S03_AXI/S03_AXI_reg] -force
|
|
assign_bd_address -offset 0x84A90000 -range 0x00004000 -target_address_space [get_bd_addr_spaces sys_ps8/Data] [get_bd_addr_segs axi_mxfe_rx_jesd/rx_axi/s_axi/axi_lite] -force
|
|
assign_bd_address -offset 0x84B90000 -range 0x00004000 -target_address_space [get_bd_addr_spaces sys_ps8/Data] [get_bd_addr_segs axi_mxfe_tx_jesd/tx_axi/s_axi/axi_lite] -force
|
|
|
|
# Exclude Address Segments
|
|
exclude_bd_addr_seg -offset 0x000800000000 -range 0x000100000000 -target_address_space [get_bd_addr_spaces axi_mxfe_rx_dma/m_dest_axi] [get_bd_addr_segs sys_ps8/SAXIGP3/HP1_DDR_HIGH]
|
|
exclude_bd_addr_seg -offset 0xFF000000 -range 0x01000000 -target_address_space [get_bd_addr_spaces axi_mxfe_rx_dma/m_dest_axi] [get_bd_addr_segs sys_ps8/SAXIGP3/HP1_LPS_OCM]
|
|
exclude_bd_addr_seg -offset 0xE0000000 -range 0x10000000 -target_address_space [get_bd_addr_spaces axi_mxfe_rx_dma/m_dest_axi] [get_bd_addr_segs sys_ps8/SAXIGP3/HP1_PCIE_LOW]
|
|
exclude_bd_addr_seg -offset 0xC0000000 -range 0x20000000 -target_address_space [get_bd_addr_spaces axi_mxfe_rx_dma/m_dest_axi] [get_bd_addr_segs sys_ps8/SAXIGP3/HP1_QSPI]
|
|
exclude_bd_addr_seg -offset 0x000800000000 -range 0x000100000000 -target_address_space [get_bd_addr_spaces axi_mxfe_rx_xcvr/m_axi] [get_bd_addr_segs sys_ps8/SAXIGP2/HP0_DDR_HIGH]
|
|
exclude_bd_addr_seg -offset 0x000800000000 -range 0x000100000000 -target_address_space [get_bd_addr_spaces axi_mxfe_tx_dma/m_src_axi] [get_bd_addr_segs sys_ps8/SAXIGP4/HP2_DDR_HIGH]
|
|
exclude_bd_addr_seg -offset 0xFF000000 -range 0x01000000 -target_address_space [get_bd_addr_spaces axi_mxfe_tx_dma/m_src_axi] [get_bd_addr_segs sys_ps8/SAXIGP4/HP2_LPS_OCM]
|
|
exclude_bd_addr_seg -offset 0xE0000000 -range 0x10000000 -target_address_space [get_bd_addr_spaces axi_mxfe_tx_dma/m_src_axi] [get_bd_addr_segs sys_ps8/SAXIGP4/HP2_PCIE_LOW]
|
|
exclude_bd_addr_seg -offset 0xC0000000 -range 0x20000000 -target_address_space [get_bd_addr_spaces axi_mxfe_tx_dma/m_src_axi] [get_bd_addr_segs sys_ps8/SAXIGP4/HP2_QSPI]
|
|
|
|
|
|
# Restore current instance
|
|
current_bd_instance $oldCurInst
|
|
|
|
validate_bd_design
|
|
save_bd_design
|
|
close_bd_design $design_name
|
|
}
|
|
# End of cr_bd_system()
|
|
cr_bd_system ""
|
|
set_property GENERATE_SYNTH_CHECKPOINT "0" [get_files system.bd ]
|
|
set_property REGISTERED_WITH_MANAGER "1" [get_files system.bd ]
|
|
|
|
set idrFlowPropertiesConstraints ""
|
|
catch {
|
|
set idrFlowPropertiesConstraints [get_param runs.disableIDRFlowPropertyConstraints]
|
|
set_param runs.disableIDRFlowPropertyConstraints 1
|
|
}
|
|
|
|
# Create 'synth_1' run (if not found)
|
|
if {[string equal [get_runs -quiet synth_1] ""]} {
|
|
create_run -name synth_1 -part xczu9eg-ffvb1156-2-e -flow {Vivado Synthesis 2022} -strategy "Vivado Synthesis Defaults" -report_strategy {No Reports} -constrset constrs_1
|
|
} else {
|
|
set_property strategy "Vivado Synthesis Defaults" [get_runs synth_1]
|
|
set_property flow "Vivado Synthesis 2022" [get_runs synth_1]
|
|
}
|
|
set obj [get_runs synth_1]
|
|
set_property set_report_strategy_name 1 $obj
|
|
set_property report_strategy {Vivado Synthesis Default Reports} $obj
|
|
set_property set_report_strategy_name 0 $obj
|
|
# Create 'synth_1_synth_report_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0] "" ] } {
|
|
create_report_config -report_name synth_1_synth_report_utilization_0 -report_type report_utilization:1.0 -steps synth_design -runs synth_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs synth_1] synth_1_synth_report_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
set obj [get_runs synth_1]
|
|
set_property -name "needs_refresh" -value "1" -objects $obj
|
|
set_property -name "auto_incremental_checkpoint" -value "1" -objects $obj
|
|
set_property -name "strategy" -value "Vivado Synthesis Defaults" -objects $obj
|
|
set_property -name "steps.synth_design.args.incremental_mode" -value "off" -objects $obj
|
|
|
|
# Create 'synth_6' run (if not found)
|
|
if {[string equal [get_runs -quiet synth_6] ""]} {
|
|
create_run -name synth_6 -part xczu9eg-ffvb1156-2-e -flow {Vivado Synthesis 2022} -strategy "Flow_AlternateRoutability" -report_strategy {No Reports} -constrset constrs_1
|
|
} else {
|
|
set_property strategy "Flow_AlternateRoutability" [get_runs synth_6]
|
|
set_property flow "Vivado Synthesis 2022" [get_runs synth_6]
|
|
}
|
|
set obj [get_runs synth_6]
|
|
set_property set_report_strategy_name 1 $obj
|
|
set_property report_strategy {Vivado Synthesis Default Reports} $obj
|
|
set_property set_report_strategy_name 0 $obj
|
|
# Create 'synth_6_synth_report_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs synth_6] synth_6_synth_report_utilization_0] "" ] } {
|
|
create_report_config -report_name synth_6_synth_report_utilization_0 -report_type report_utilization:1.0 -steps synth_design -runs synth_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs synth_6] synth_6_synth_report_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
set obj [get_runs synth_6]
|
|
set_property -name "auto_incremental_checkpoint" -value "1" -objects $obj
|
|
set_property -name "strategy" -value "Flow_AlternateRoutability" -objects $obj
|
|
set_property -name "steps.synth_design.args.directive" -value "AlternateRoutability" -objects $obj
|
|
set_property -name "steps.synth_design.args.no_lc" -value "1" -objects $obj
|
|
set_property -name "steps.synth_design.args.shreg_min_size" -value "10" -objects $obj
|
|
|
|
# set the current synth run
|
|
current_run -synthesis [get_runs synth_1]
|
|
|
|
# Create 'impl_1' run (if not found)
|
|
if {[string equal [get_runs -quiet impl_1] ""]} {
|
|
create_run -name impl_1 -part xczu9eg-ffvb1156-2-e -flow {Vivado Implementation 2022} -strategy "Vivado Implementation Defaults" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1
|
|
} else {
|
|
set_property strategy "Vivado Implementation Defaults" [get_runs impl_1]
|
|
set_property flow "Vivado Implementation 2022" [get_runs impl_1]
|
|
}
|
|
set obj [get_runs impl_1]
|
|
set_property set_report_strategy_name 1 $obj
|
|
set_property report_strategy {Vivado Implementation Default Reports} $obj
|
|
set_property set_report_strategy_name 0 $obj
|
|
# Create 'impl_1_init_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_1_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_init_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_opt_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_1_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_1_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_1_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_place_report_io_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0] "" ] } {
|
|
create_report_config -report_name impl_1_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_io_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_place_report_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_1_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_place_report_control_sets_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0] "" ] } {
|
|
create_report_config -report_name impl_1_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_control_sets_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.verbose" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_place_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_1_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_place_report_incremental_reuse_1' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1] "" ] } {
|
|
create_report_config -report_name impl_1_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_incremental_reuse_1]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_place_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_1_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_place_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_post_place_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_1_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_place_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_1_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_route_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_1_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_route_report_methodology_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0] "" ] } {
|
|
create_report_config -report_name impl_1_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_methodology_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_route_report_power_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0] "" ] } {
|
|
create_report_config -report_name impl_1_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_power_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_route_report_route_status_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0] "" ] } {
|
|
create_report_config -report_name impl_1_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_route_status_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_route_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_1_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_route_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_1_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_route_report_clock_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_1_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_clock_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_1_route_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_1_route_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps route_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_route_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_post_route_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_1_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_1_post_route_phys_opt_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_1_post_route_phys_opt_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps post_route_phys_opt_design -runs impl_1
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_1] impl_1_post_route_phys_opt_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
set obj [get_runs impl_1]
|
|
set_property -name "strategy" -value "Vivado Implementation Defaults" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj
|
|
|
|
# Create 'impl_2' run (if not found)
|
|
if {[string equal [get_runs -quiet impl_2] ""]} {
|
|
create_run -name impl_2 -part xczu9eg-ffvb1156-2-e -flow {Vivado Implementation 2022} -strategy "Performance_Auto_1" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1
|
|
} else {
|
|
set_property strategy "Performance_Auto_1" [get_runs impl_2]
|
|
set_property flow "Vivado Implementation 2022" [get_runs impl_2]
|
|
}
|
|
set obj [get_runs impl_2]
|
|
set_property set_report_strategy_name 1 $obj
|
|
set_property report_strategy {Vivado Implementation Default Reports} $obj
|
|
set_property set_report_strategy_name 0 $obj
|
|
# Create 'impl_2_init_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_init_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_2_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_init_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_2_opt_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_opt_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_2_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_opt_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_2_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_2_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_2_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_2_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_2_place_report_io_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_place_report_io_0] "" ] } {
|
|
create_report_config -report_name impl_2_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_place_report_io_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_2_place_report_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_place_report_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_2_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_place_report_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_2_place_report_control_sets_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_place_report_control_sets_0] "" ] } {
|
|
create_report_config -report_name impl_2_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_place_report_control_sets_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.verbose" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_2_place_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_place_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_2_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_place_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_2_place_report_incremental_reuse_1' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_place_report_incremental_reuse_1] "" ] } {
|
|
create_report_config -report_name impl_2_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_place_report_incremental_reuse_1]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_2_place_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_place_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_2_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_place_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_2_post_place_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_post_place_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_2_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_post_place_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_2_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_2_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_2_route_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_route_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_2_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_route_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_2_route_report_methodology_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_route_report_methodology_0] "" ] } {
|
|
create_report_config -report_name impl_2_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_route_report_methodology_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_2_route_report_power_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_route_report_power_0] "" ] } {
|
|
create_report_config -report_name impl_2_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_route_report_power_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_2_route_report_route_status_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_route_report_route_status_0] "" ] } {
|
|
create_report_config -report_name impl_2_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_route_report_route_status_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_2_route_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_route_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_2_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_route_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_2_route_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_route_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_2_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_route_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_2_route_report_clock_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_route_report_clock_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_2_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_route_report_clock_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_2_route_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_route_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_2_route_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps route_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_route_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_2_post_route_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_post_route_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_2_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_post_route_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_2_post_route_phys_opt_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_2] impl_2_post_route_phys_opt_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_2_post_route_phys_opt_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps post_route_phys_opt_design -runs impl_2
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_2] impl_2_post_route_phys_opt_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
set obj [get_runs impl_2]
|
|
set_property -name "strategy" -value "Performance_Auto_1" -objects $obj
|
|
set_property -name "steps.opt_design.args.directive" -value "Explore" -objects $obj
|
|
set_property -name "steps.place_design.args.directive" -value "Auto_1" -objects $obj
|
|
set_property -name "steps.phys_opt_design.args.directive" -value "AggressiveExplore" -objects $obj
|
|
set_property -name "steps.route_design.args.directive" -value "NoTimingRelaxation" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj
|
|
|
|
# Create 'impl_3' run (if not found)
|
|
if {[string equal [get_runs -quiet impl_3] ""]} {
|
|
create_run -name impl_3 -part xczu9eg-ffvb1156-2-e -flow {Vivado Implementation 2022} -strategy "Performance_Auto_2" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1
|
|
} else {
|
|
set_property strategy "Performance_Auto_2" [get_runs impl_3]
|
|
set_property flow "Vivado Implementation 2022" [get_runs impl_3]
|
|
}
|
|
set obj [get_runs impl_3]
|
|
set_property set_report_strategy_name 1 $obj
|
|
set_property report_strategy {Vivado Implementation Default Reports} $obj
|
|
set_property set_report_strategy_name 0 $obj
|
|
# Create 'impl_3_init_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_init_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_3_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_init_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_3_opt_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_opt_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_3_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_opt_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_3_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_3_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_3_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_3_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_3_place_report_io_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_place_report_io_0] "" ] } {
|
|
create_report_config -report_name impl_3_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_place_report_io_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_3_place_report_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_place_report_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_3_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_place_report_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_3_place_report_control_sets_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_place_report_control_sets_0] "" ] } {
|
|
create_report_config -report_name impl_3_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_place_report_control_sets_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.verbose" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_3_place_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_place_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_3_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_place_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_3_place_report_incremental_reuse_1' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_place_report_incremental_reuse_1] "" ] } {
|
|
create_report_config -report_name impl_3_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_place_report_incremental_reuse_1]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_3_place_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_place_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_3_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_place_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_3_post_place_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_post_place_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_3_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_post_place_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_3_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_3_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_3_route_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_route_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_3_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_route_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_3_route_report_methodology_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_route_report_methodology_0] "" ] } {
|
|
create_report_config -report_name impl_3_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_route_report_methodology_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_3_route_report_power_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_route_report_power_0] "" ] } {
|
|
create_report_config -report_name impl_3_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_route_report_power_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_3_route_report_route_status_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_route_report_route_status_0] "" ] } {
|
|
create_report_config -report_name impl_3_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_route_report_route_status_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_3_route_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_route_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_3_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_route_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_3_route_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_route_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_3_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_route_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_3_route_report_clock_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_route_report_clock_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_3_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_route_report_clock_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_3_route_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_route_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_3_route_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps route_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_route_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_3_post_route_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_post_route_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_3_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_post_route_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_3_post_route_phys_opt_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_3] impl_3_post_route_phys_opt_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_3_post_route_phys_opt_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps post_route_phys_opt_design -runs impl_3
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_3] impl_3_post_route_phys_opt_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
set obj [get_runs impl_3]
|
|
set_property -name "strategy" -value "Performance_Auto_2" -objects $obj
|
|
set_property -name "steps.opt_design.args.directive" -value "Explore" -objects $obj
|
|
set_property -name "steps.place_design.args.directive" -value "Auto_2" -objects $obj
|
|
set_property -name "steps.phys_opt_design.args.directive" -value "AggressiveExplore" -objects $obj
|
|
set_property -name "steps.route_design.args.directive" -value "NoTimingRelaxation" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj
|
|
|
|
# Create 'impl_4' run (if not found)
|
|
if {[string equal [get_runs -quiet impl_4] ""]} {
|
|
create_run -name impl_4 -part xczu9eg-ffvb1156-2-e -flow {Vivado Implementation 2022} -strategy "Performance_Auto_3" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1
|
|
} else {
|
|
set_property strategy "Performance_Auto_3" [get_runs impl_4]
|
|
set_property flow "Vivado Implementation 2022" [get_runs impl_4]
|
|
}
|
|
set obj [get_runs impl_4]
|
|
set_property set_report_strategy_name 1 $obj
|
|
set_property report_strategy {Vivado Implementation Default Reports} $obj
|
|
set_property set_report_strategy_name 0 $obj
|
|
# Create 'impl_4_init_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_init_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_4_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_init_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_4_opt_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_opt_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_4_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_opt_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_4_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_4_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_4_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_4_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_4_place_report_io_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_place_report_io_0] "" ] } {
|
|
create_report_config -report_name impl_4_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_place_report_io_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_4_place_report_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_place_report_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_4_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_place_report_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_4_place_report_control_sets_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_place_report_control_sets_0] "" ] } {
|
|
create_report_config -report_name impl_4_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_place_report_control_sets_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.verbose" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_4_place_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_place_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_4_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_place_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_4_place_report_incremental_reuse_1' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_place_report_incremental_reuse_1] "" ] } {
|
|
create_report_config -report_name impl_4_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_place_report_incremental_reuse_1]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_4_place_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_place_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_4_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_place_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_4_post_place_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_post_place_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_4_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_post_place_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_4_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_4_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_4_route_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_route_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_4_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_route_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_4_route_report_methodology_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_route_report_methodology_0] "" ] } {
|
|
create_report_config -report_name impl_4_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_route_report_methodology_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_4_route_report_power_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_route_report_power_0] "" ] } {
|
|
create_report_config -report_name impl_4_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_route_report_power_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_4_route_report_route_status_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_route_report_route_status_0] "" ] } {
|
|
create_report_config -report_name impl_4_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_route_report_route_status_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_4_route_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_route_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_4_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_route_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_4_route_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_route_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_4_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_route_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_4_route_report_clock_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_route_report_clock_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_4_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_route_report_clock_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_4_route_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_route_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_4_route_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps route_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_route_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_4_post_route_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_post_route_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_4_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_post_route_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_4_post_route_phys_opt_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_4] impl_4_post_route_phys_opt_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_4_post_route_phys_opt_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps post_route_phys_opt_design -runs impl_4
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_4] impl_4_post_route_phys_opt_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
set obj [get_runs impl_4]
|
|
set_property -name "strategy" -value "Performance_Auto_3" -objects $obj
|
|
set_property -name "steps.opt_design.args.directive" -value "Explore" -objects $obj
|
|
set_property -name "steps.place_design.args.directive" -value "Auto_3" -objects $obj
|
|
set_property -name "steps.phys_opt_design.args.directive" -value "AggressiveExplore" -objects $obj
|
|
set_property -name "steps.route_design.args.directive" -value "NoTimingRelaxation" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj
|
|
|
|
# Create 'impl_5' run (if not found)
|
|
if {[string equal [get_runs -quiet impl_5] ""]} {
|
|
create_run -name impl_5 -part xczu9eg-ffvb1156-2-e -flow {Vivado Implementation 2022} -strategy "Performance_Explore" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1
|
|
} else {
|
|
set_property strategy "Performance_Explore" [get_runs impl_5]
|
|
set_property flow "Vivado Implementation 2022" [get_runs impl_5]
|
|
}
|
|
set obj [get_runs impl_5]
|
|
set_property set_report_strategy_name 1 $obj
|
|
set_property report_strategy {Vivado Implementation Default Reports} $obj
|
|
set_property set_report_strategy_name 0 $obj
|
|
# Create 'impl_5_init_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_init_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_5_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_init_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_5_opt_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_opt_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_5_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_opt_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_5_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_5_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_5_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_5_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_5_place_report_io_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_place_report_io_0] "" ] } {
|
|
create_report_config -report_name impl_5_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_place_report_io_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_5_place_report_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_place_report_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_5_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_place_report_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_5_place_report_control_sets_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_place_report_control_sets_0] "" ] } {
|
|
create_report_config -report_name impl_5_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_place_report_control_sets_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.verbose" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_5_place_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_place_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_5_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_place_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_5_place_report_incremental_reuse_1' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_place_report_incremental_reuse_1] "" ] } {
|
|
create_report_config -report_name impl_5_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_place_report_incremental_reuse_1]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_5_place_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_place_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_5_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_place_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_5_post_place_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_post_place_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_5_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_post_place_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_5_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_5_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_5_route_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_route_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_5_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_route_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_5_route_report_methodology_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_route_report_methodology_0] "" ] } {
|
|
create_report_config -report_name impl_5_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_route_report_methodology_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_5_route_report_power_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_route_report_power_0] "" ] } {
|
|
create_report_config -report_name impl_5_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_route_report_power_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_5_route_report_route_status_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_route_report_route_status_0] "" ] } {
|
|
create_report_config -report_name impl_5_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_route_report_route_status_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_5_route_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_route_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_5_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_route_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_5_route_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_route_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_5_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_route_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_5_route_report_clock_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_route_report_clock_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_5_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_route_report_clock_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_5_route_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_route_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_5_route_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps route_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_route_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_5_post_route_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_post_route_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_5_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_post_route_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_5_post_route_phys_opt_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_5] impl_5_post_route_phys_opt_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_5_post_route_phys_opt_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps post_route_phys_opt_design -runs impl_5
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_5] impl_5_post_route_phys_opt_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
set obj [get_runs impl_5]
|
|
set_property -name "strategy" -value "Performance_Explore" -objects $obj
|
|
set_property -name "steps.opt_design.args.directive" -value "Explore" -objects $obj
|
|
set_property -name "steps.place_design.args.directive" -value "Explore" -objects $obj
|
|
set_property -name "steps.phys_opt_design.args.directive" -value "Explore" -objects $obj
|
|
set_property -name "steps.route_design.args.directive" -value "Explore" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj
|
|
|
|
# Create 'impl_6' run (if not found)
|
|
if {[string equal [get_runs -quiet impl_6] ""]} {
|
|
create_run -name impl_6 -part xczu9eg-ffvb1156-2-e -flow {Vivado Implementation 2022} -strategy "Performance_ExplorePostRoutePhysOpt" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1
|
|
} else {
|
|
set_property strategy "Performance_ExplorePostRoutePhysOpt" [get_runs impl_6]
|
|
set_property flow "Vivado Implementation 2022" [get_runs impl_6]
|
|
}
|
|
set obj [get_runs impl_6]
|
|
set_property set_report_strategy_name 1 $obj
|
|
set_property report_strategy {Vivado Implementation Default Reports} $obj
|
|
set_property set_report_strategy_name 0 $obj
|
|
# Create 'impl_6_init_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_init_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_6_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_init_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_6_opt_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_opt_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_6_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_opt_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_6_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_6_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_6_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_6_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_6_place_report_io_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_place_report_io_0] "" ] } {
|
|
create_report_config -report_name impl_6_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_place_report_io_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_6_place_report_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_place_report_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_6_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_place_report_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_6_place_report_control_sets_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_place_report_control_sets_0] "" ] } {
|
|
create_report_config -report_name impl_6_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_place_report_control_sets_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.verbose" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_6_place_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_place_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_6_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_place_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_6_place_report_incremental_reuse_1' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_place_report_incremental_reuse_1] "" ] } {
|
|
create_report_config -report_name impl_6_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_place_report_incremental_reuse_1]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_6_place_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_place_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_6_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_place_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_6_post_place_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_post_place_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_6_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_post_place_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_6_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_6_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_6_route_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_route_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_6_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_route_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_6_route_report_methodology_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_route_report_methodology_0] "" ] } {
|
|
create_report_config -report_name impl_6_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_route_report_methodology_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_6_route_report_power_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_route_report_power_0] "" ] } {
|
|
create_report_config -report_name impl_6_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_route_report_power_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_6_route_report_route_status_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_route_report_route_status_0] "" ] } {
|
|
create_report_config -report_name impl_6_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_route_report_route_status_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_6_route_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_route_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_6_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_route_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_6_route_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_route_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_6_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_route_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_6_route_report_clock_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_route_report_clock_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_6_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_route_report_clock_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_6_route_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_route_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_6_route_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps route_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_route_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_6_post_route_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_post_route_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_6_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_post_route_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_6_post_route_phys_opt_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_6] impl_6_post_route_phys_opt_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_6_post_route_phys_opt_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps post_route_phys_opt_design -runs impl_6
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_6] impl_6_post_route_phys_opt_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
set obj [get_runs impl_6]
|
|
set_property -name "strategy" -value "Performance_ExplorePostRoutePhysOpt" -objects $obj
|
|
set_property -name "steps.opt_design.args.directive" -value "Explore" -objects $obj
|
|
set_property -name "steps.place_design.args.directive" -value "Explore" -objects $obj
|
|
set_property -name "steps.phys_opt_design.args.directive" -value "Explore" -objects $obj
|
|
set_property -name "steps.route_design.args.directive" -value "Explore" -objects $obj
|
|
set_property -name "steps.route_design.args.more options" -value "-tns_cleanup" -objects $obj
|
|
set_property -name "steps.post_route_phys_opt_design.is_enabled" -value "1" -objects $obj
|
|
set_property -name "steps.post_route_phys_opt_design.args.directive" -value "Explore" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj
|
|
|
|
# Create 'impl_7' run (if not found)
|
|
if {[string equal [get_runs -quiet impl_7] ""]} {
|
|
create_run -name impl_7 -part xczu9eg-ffvb1156-2-e -flow {Vivado Implementation 2022} -strategy "Performance_ExploreWithRemap" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_1
|
|
} else {
|
|
set_property strategy "Performance_ExploreWithRemap" [get_runs impl_7]
|
|
set_property flow "Vivado Implementation 2022" [get_runs impl_7]
|
|
}
|
|
set obj [get_runs impl_7]
|
|
set_property set_report_strategy_name 1 $obj
|
|
set_property report_strategy {Vivado Implementation Default Reports} $obj
|
|
set_property set_report_strategy_name 0 $obj
|
|
# Create 'impl_7_init_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_init_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_7_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_init_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_7_opt_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_opt_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_7_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_opt_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_7_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_7_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_7_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_7_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_7_place_report_io_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_place_report_io_0] "" ] } {
|
|
create_report_config -report_name impl_7_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_place_report_io_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_7_place_report_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_place_report_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_7_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_place_report_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_7_place_report_control_sets_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_place_report_control_sets_0] "" ] } {
|
|
create_report_config -report_name impl_7_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_place_report_control_sets_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.verbose" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_7_place_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_place_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_7_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_place_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_7_place_report_incremental_reuse_1' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_place_report_incremental_reuse_1] "" ] } {
|
|
create_report_config -report_name impl_7_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_place_report_incremental_reuse_1]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_7_place_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_place_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_7_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_place_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_7_post_place_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_post_place_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_7_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_post_place_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_7_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_7_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_7_route_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_route_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_7_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_route_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_7_route_report_methodology_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_route_report_methodology_0] "" ] } {
|
|
create_report_config -report_name impl_7_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_route_report_methodology_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_7_route_report_power_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_route_report_power_0] "" ] } {
|
|
create_report_config -report_name impl_7_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_route_report_power_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_7_route_report_route_status_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_route_report_route_status_0] "" ] } {
|
|
create_report_config -report_name impl_7_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_route_report_route_status_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_7_route_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_route_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_7_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_route_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_7_route_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_route_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_7_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_route_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_7_route_report_clock_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_route_report_clock_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_7_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_route_report_clock_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_7_route_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_route_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_7_route_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps route_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_route_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_7_post_route_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_post_route_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_7_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_post_route_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_7_post_route_phys_opt_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_7] impl_7_post_route_phys_opt_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_7_post_route_phys_opt_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps post_route_phys_opt_design -runs impl_7
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_7] impl_7_post_route_phys_opt_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
set obj [get_runs impl_7]
|
|
set_property -name "strategy" -value "Performance_ExploreWithRemap" -objects $obj
|
|
set_property -name "steps.opt_design.args.directive" -value "ExploreWithRemap" -objects $obj
|
|
set_property -name "steps.place_design.args.directive" -value "Explore" -objects $obj
|
|
set_property -name "steps.phys_opt_design.args.directive" -value "Explore" -objects $obj
|
|
set_property -name "steps.route_design.args.directive" -value "NoTimingRelaxation" -objects $obj
|
|
set_property -name "steps.route_design.args.more options" -value "-tns_cleanup" -objects $obj
|
|
set_property -name "steps.post_route_phys_opt_design.is_enabled" -value "1" -objects $obj
|
|
set_property -name "steps.post_route_phys_opt_design.args.directive" -value "Explore" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj
|
|
|
|
# Create 'impl_12' run (if not found)
|
|
if {[string equal [get_runs -quiet impl_12] ""]} {
|
|
create_run -name impl_12 -part xczu9eg-ffvb1156-2-e -flow {Vivado Implementation 2022} -strategy "Vivado Implementation Defaults" -report_strategy {No Reports} -constrset constrs_1 -parent_run synth_6
|
|
} else {
|
|
set_property strategy "Vivado Implementation Defaults" [get_runs impl_12]
|
|
set_property flow "Vivado Implementation 2022" [get_runs impl_12]
|
|
}
|
|
set obj [get_runs impl_12]
|
|
set_property set_report_strategy_name 1 $obj
|
|
set_property report_strategy {Vivado Implementation Default Reports} $obj
|
|
set_property set_report_strategy_name 0 $obj
|
|
# Create 'impl_12_init_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_init_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_12_init_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps init_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_init_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_12_opt_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_opt_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_12_opt_report_drc_0 -report_type report_drc:1.0 -steps opt_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_opt_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_12_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_12_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps opt_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_12_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_12_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps power_opt_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_12_place_report_io_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_place_report_io_0] "" ] } {
|
|
create_report_config -report_name impl_12_place_report_io_0 -report_type report_io:1.0 -steps place_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_place_report_io_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_12_place_report_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_place_report_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_12_place_report_utilization_0 -report_type report_utilization:1.0 -steps place_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_place_report_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_12_place_report_control_sets_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_place_report_control_sets_0] "" ] } {
|
|
create_report_config -report_name impl_12_place_report_control_sets_0 -report_type report_control_sets:1.0 -steps place_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_place_report_control_sets_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.verbose" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_12_place_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_place_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_12_place_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_place_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_12_place_report_incremental_reuse_1' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_place_report_incremental_reuse_1] "" ] } {
|
|
create_report_config -report_name impl_12_place_report_incremental_reuse_1 -report_type report_incremental_reuse:1.0 -steps place_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_place_report_incremental_reuse_1]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_12_place_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_place_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_12_place_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps place_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_place_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_12_post_place_power_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_post_place_power_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_12_post_place_power_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_place_power_opt_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_post_place_power_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_12_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_12_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps phys_opt_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "is_enabled" -value "0" -objects $obj
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_12_route_report_drc_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_route_report_drc_0] "" ] } {
|
|
create_report_config -report_name impl_12_route_report_drc_0 -report_type report_drc:1.0 -steps route_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_route_report_drc_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_12_route_report_methodology_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_route_report_methodology_0] "" ] } {
|
|
create_report_config -report_name impl_12_route_report_methodology_0 -report_type report_methodology:1.0 -steps route_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_route_report_methodology_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_12_route_report_power_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_route_report_power_0] "" ] } {
|
|
create_report_config -report_name impl_12_route_report_power_0 -report_type report_power:1.0 -steps route_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_route_report_power_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_12_route_report_route_status_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_route_report_route_status_0] "" ] } {
|
|
create_report_config -report_name impl_12_route_report_route_status_0 -report_type report_route_status:1.0 -steps route_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_route_report_route_status_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_12_route_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_route_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_12_route_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps route_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_route_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_12_route_report_incremental_reuse_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_route_report_incremental_reuse_0] "" ] } {
|
|
create_report_config -report_name impl_12_route_report_incremental_reuse_0 -report_type report_incremental_reuse:1.0 -steps route_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_route_report_incremental_reuse_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_12_route_report_clock_utilization_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_route_report_clock_utilization_0] "" ] } {
|
|
create_report_config -report_name impl_12_route_report_clock_utilization_0 -report_type report_clock_utilization:1.0 -steps route_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_route_report_clock_utilization_0]
|
|
if { $obj != "" } {
|
|
|
|
}
|
|
# Create 'impl_12_route_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_route_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_12_route_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps route_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_route_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_12_post_route_phys_opt_report_timing_summary_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_post_route_phys_opt_report_timing_summary_0] "" ] } {
|
|
create_report_config -report_name impl_12_post_route_phys_opt_report_timing_summary_0 -report_type report_timing_summary:1.0 -steps post_route_phys_opt_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_post_route_phys_opt_report_timing_summary_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.max_paths" -value "10" -objects $obj
|
|
set_property -name "options.report_unconstrained" -value "1" -objects $obj
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
# Create 'impl_12_post_route_phys_opt_report_bus_skew_0' report (if not found)
|
|
if { [ string equal [get_report_configs -of_objects [get_runs impl_12] impl_12_post_route_phys_opt_report_bus_skew_0] "" ] } {
|
|
create_report_config -report_name impl_12_post_route_phys_opt_report_bus_skew_0 -report_type report_bus_skew:1.1 -steps post_route_phys_opt_design -runs impl_12
|
|
}
|
|
set obj [get_report_configs -of_objects [get_runs impl_12] impl_12_post_route_phys_opt_report_bus_skew_0]
|
|
if { $obj != "" } {
|
|
set_property -name "options.warn_on_violation" -value "1" -objects $obj
|
|
|
|
}
|
|
set obj [get_runs impl_12]
|
|
set_property -name "strategy" -value "Vivado Implementation Defaults" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.readback_file" -value "0" -objects $obj
|
|
set_property -name "steps.write_bitstream.args.verbose" -value "0" -objects $obj
|
|
|
|
# set the current impl run
|
|
current_run -implementation [get_runs impl_6]
|
|
catch {
|
|
if { $idrFlowPropertiesConstraints != {} } {
|
|
set_param runs.disableIDRFlowPropertyConstraints $idrFlowPropertiesConstraints
|
|
}
|
|
}
|
|
|
|
puts "INFO: Project created:${_xil_proj_name_}"
|
|
# Create 'drc_1' gadget (if not found)
|
|
if {[string equal [get_dashboard_gadgets [ list "drc_1" ] ] ""]} {
|
|
create_dashboard_gadget -name {drc_1} -type drc
|
|
}
|
|
set obj [get_dashboard_gadgets [ list "drc_1" ] ]
|
|
set_property -name "reports" -value "impl_1#impl_1_route_report_drc_0" -objects $obj
|
|
|
|
# Create 'methodology_1' gadget (if not found)
|
|
if {[string equal [get_dashboard_gadgets [ list "methodology_1" ] ] ""]} {
|
|
create_dashboard_gadget -name {methodology_1} -type methodology
|
|
}
|
|
set obj [get_dashboard_gadgets [ list "methodology_1" ] ]
|
|
set_property -name "reports" -value "impl_1#impl_1_route_report_methodology_0" -objects $obj
|
|
|
|
# Create 'power_1' gadget (if not found)
|
|
if {[string equal [get_dashboard_gadgets [ list "power_1" ] ] ""]} {
|
|
create_dashboard_gadget -name {power_1} -type power
|
|
}
|
|
set obj [get_dashboard_gadgets [ list "power_1" ] ]
|
|
set_property -name "reports" -value "impl_1#impl_1_route_report_power_0" -objects $obj
|
|
|
|
# Create 'timing_1' gadget (if not found)
|
|
if {[string equal [get_dashboard_gadgets [ list "timing_1" ] ] ""]} {
|
|
create_dashboard_gadget -name {timing_1} -type timing
|
|
}
|
|
set obj [get_dashboard_gadgets [ list "timing_1" ] ]
|
|
set_property -name "reports" -value "impl_1#impl_1_route_report_timing_summary_0" -objects $obj
|
|
|
|
# Create 'utilization_1' gadget (if not found)
|
|
if {[string equal [get_dashboard_gadgets [ list "utilization_1" ] ] ""]} {
|
|
create_dashboard_gadget -name {utilization_1} -type utilization
|
|
}
|
|
set obj [get_dashboard_gadgets [ list "utilization_1" ] ]
|
|
set_property -name "reports" -value "synth_1#synth_1_synth_report_utilization_0" -objects $obj
|
|
set_property -name "run.step" -value "synth_design" -objects $obj
|
|
set_property -name "run.type" -value "synthesis" -objects $obj
|
|
|
|
# Create 'utilization_2' gadget (if not found)
|
|
if {[string equal [get_dashboard_gadgets [ list "utilization_2" ] ] ""]} {
|
|
create_dashboard_gadget -name {utilization_2} -type utilization
|
|
}
|
|
set obj [get_dashboard_gadgets [ list "utilization_2" ] ]
|
|
set_property -name "reports" -value "impl_1#impl_1_place_report_utilization_0" -objects $obj
|
|
|
|
move_dashboard_gadget -name {utilization_1} -row 0 -col 0
|
|
move_dashboard_gadget -name {power_1} -row 1 -col 0
|
|
move_dashboard_gadget -name {drc_1} -row 2 -col 0
|
|
move_dashboard_gadget -name {timing_1} -row 0 -col 1
|
|
move_dashboard_gadget -name {utilization_2} -row 1 -col 1
|
|
move_dashboard_gadget -name {methodology_1} -row 2 -col 1
|