moving repo from git to local repo

ip_repo/axi_regs_32/xgui/axi_regs_32_v1_0.tcl

@@ -0,0 +1,38 @@
+# Definitional proc to organize widgets for parameters.
+proc init_gui { IPINST } {
+  ipgui::add_param $IPINST -name "Component_Name"
+  #Adding Page
+  ipgui::add_page $IPINST -name "Page 0"
+
+
+}
+
+proc update_PARAM_VALUE.C_S_AXI_ADDR_WIDTH { PARAM_VALUE.C_S_AXI_ADDR_WIDTH } {
+	# Procedure called to update C_S_AXI_ADDR_WIDTH when any of the dependent parameters in the arguments change
+}
+
+proc validate_PARAM_VALUE.C_S_AXI_ADDR_WIDTH { PARAM_VALUE.C_S_AXI_ADDR_WIDTH } {
+	# Procedure called to validate C_S_AXI_ADDR_WIDTH
+	return true
+}
+
+proc update_PARAM_VALUE.C_S_AXI_DATA_WIDTH { PARAM_VALUE.C_S_AXI_DATA_WIDTH } {
+	# Procedure called to update C_S_AXI_DATA_WIDTH when any of the dependent parameters in the arguments change
+}
+
+proc validate_PARAM_VALUE.C_S_AXI_DATA_WIDTH { PARAM_VALUE.C_S_AXI_DATA_WIDTH } {
+	# Procedure called to validate C_S_AXI_DATA_WIDTH
+	return true
+}
+
+
+proc update_MODELPARAM_VALUE.C_S_AXI_DATA_WIDTH { MODELPARAM_VALUE.C_S_AXI_DATA_WIDTH PARAM_VALUE.C_S_AXI_DATA_WIDTH } {
+	# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
+	set_property value [get_property value ${PARAM_VALUE.C_S_AXI_DATA_WIDTH}] ${MODELPARAM_VALUE.C_S_AXI_DATA_WIDTH}
+}
+
+proc update_MODELPARAM_VALUE.C_S_AXI_ADDR_WIDTH { MODELPARAM_VALUE.C_S_AXI_ADDR_WIDTH PARAM_VALUE.C_S_AXI_ADDR_WIDTH } {
+	# Procedure called to set VHDL generic/Verilog parameter value(s) based on TCL parameter value
+	set_property value [get_property value ${PARAM_VALUE.C_S_AXI_ADDR_WIDTH}] ${MODELPARAM_VALUE.C_S_AXI_ADDR_WIDTH}
+}
+